Look just buy good caulk. That is it. Nothing lasts for 25 years so do not believe that. Usually caulk lasts for six or seven years. That’s it. So do not pay 6 $$$ per tube. But, if you pay 3 or 4 $$$ you are in the right range. If you can get that exact same type of caulk on sale all the better.
http://alsnetbiz.com/homeimprovement/info10.html
 |
||
 |
The average house–even when well-insulated–contains cracks and gaps between building materials that add up to a hole about 14 “square (Fig. 1). In the winter, those gaps may make the house drafty and chilly. All year long, a leaky house not only wastes energy, but can lead to water damage and provide a path for insects. Inside this document you will find information about:
|
WEATHERPROOFING BASICS
- In all the discussion of insulation and R-values, don’t forget that poor weatherproofing is often a more important source of discomfort, as well as high heating and cooling bills.
- Some air leakage can be prevented during construction by using housewrap or getting a tight fit between framing members, for example. Once the house is built, however, the remaining gaps must be sealed. Gaps around doors and window sashes should be weatherstripped, and gaps between permanent building materials sealed with caulking.
FIG. 1 – Where caulking should be applied, from the Sunset book, Insulation and Weatherstripping, © Sunset Publishing Corp.
TYPES OF WEATHERSTRIPPING
- The greatest source of air leakage in most homes occurs around doors, windows, and access hatches, such as the ceiling opening from the living area into an unheated attic (Fig. 4). Weatherstripping can be a delicate job because those openings need to be fitted loosely enough that the door or window operates freely, yet tightly enough that air leakage is stopped.
- The type of weatherstripping you’ll use depends on the location and the type of opening. Three types of weatherstripping are common:
- Compression–Compression weatherstripping (Fig. 5) is used to seal swinging doors and window sashes. It consists of a molded strip (it may be wood, aluminum or rigid vinyl) with a flexible vinyl bulb along one side. As a rule, compression weatherstripping is the most durable type available.
- V-Type Strips–V-shaped weatherstripping (Figs. 6 & 7) is fitted against the side of the door or window jamb so it presses against the edge of the door or sash and forms a seal. V-stripping may be vinyl or bronze.
- Foam–Foam weatherstripping (Fig. 8) is used to seal either swinging or sliding doors or windows. It comes in various sizes with an adhesive backing on one side. It is fastened to the edge of a door or window stop, or to the bottom of a sliding window sash.
- Thresholds and Door Bottoms–A threshold fills the gap between the floor and the bottom of a door. It may have a built-in vinyl bulb. If not, it must be used in combination with a door bottom (Fig. 9), mounted on the lower edge of the door.
:}
So if you want to read about all that caulk or look at the pretty pictures about how to install weather stripping. Please go to the sight and look. More tomorrow.
:}