Category Archives: advanced energy structures

Fed Credits For Solar Water Heaters – Once it is paid for it is free for life

Posted on by
2

Or at least for the life of the equipment. (it’s jam band friday – http://www.youtube.com/watch?v=fhNrqc6yvTU)

I mean this is the ultimate irony in the utility world. Heating water with anything other than the sun which is free is a crime. I mean think about it. Why? First the Tax Credit

Not there silly here:

http://www.energystar.gov/index.cfm?c=products.pr_tax_credits#s11

Solar Energy Systems Solar Water Heating At least half of the energy generated by the “qualifying property” must come from the sun. Homeowners may only claim spending on the solar water heating system property, not the entire water heating system of the household.The credit is not available for expenses for swimming pools or hot tubs.The water must be used in the dwelling.The system must be certified by the Solar Rating and Certification Corporation (SRCC). 30% of cost All ENERGY STAR solar water heaters qualify for the tax credit.Use IRS Form 5695 PDF Exit ENERGY STARMust be placed in service before December 31, 2016.

:}

( http://www.youtube.com/watch?v=LANwIgpha7k )

No pools or hot tubs dam nit…we can’t have everything being free. So these things come in all shapes and sizes:

http://www.energysavers.gov/your_home/water_heating/index.cfm/mytopic=12850

Solar Water Heaters

Solar water heaters—also called solar domestic hot water systems—can be a cost-effective way to generate hot water for your home. They can be used in any climate, and the fuel they use—sunshine—is free.

How They Work

Solar water heating systems include storage tanks and solar collectors. There are two types of solar water heating systems: active, which have circulating pumps and controls, and passive, which don’t.

Most solar water heaters require a well-insulated storage tank. Solar storage tanks have an additional outlet and inlet connected to and from the collector. In two-tank systems, the solar water heater preheats water before it enters the conventional water heater. In one-tank systems, the back-up heater is combined with the solar storage in one tank.

Three types of solar collectors are used for residential applications:

  • Flat-plate collector

    Glazed flat-plate collectors are insulated, weatherproofed boxes that contain a dark absorber plate under one or more glass or plastic (polymer) covers. Unglazed flat-plate collectors—typically used for solar pool heating—have a dark absorber plate, made of metal or polymer, without a cover or enclosure.

  • Integral collector-storage systems

    Also known as ICS or batch systems, they feature one or more black tanks or tubes in an insulated, glazed box. Cold water first passes through the solar collector, which preheats the water. The water then continues on to the conventional backup water heater, providing a reliable source of hot water. They should be installed only in mild-freeze climates because the outdoor pipes could freeze in severe, cold weather.

  • Evacuated-tube solar collectors

    They feature parallel rows of transparent glass tubes. Each tube contains a glass outer tube and metal absorber tube attached to a fin. The fin’s coating absorbs solar energy but inhibits radiative heat loss. These collectors are used more frequently for U.S. commercial applications.

There are two types of active solar water heating systems:

  • Direct circulation systems

    Pumps circulate household water through the collectors and into the home. They work well in climates where it rarely freezes.

  • Indirect circulation systems

    Pumps circulate a non-freezing, heat-transfer fluid through the collectors and a heat exchanger. This heats the water that then flows into the home. They are popular in climates prone to freezing temperatures.

:}

( http://www.youtube.com/watch?v=uLlOTPBBq9k  )

Still you must decide:

http://www.solardirect.com/swh/swh.htm

Solar Water Heating Systems

 

  All solar water heaters work in every climate, but different types of heaters work best in different areas, see below:
Passive Solar Water Heater Active Solar Water Heater Trendsetter Solar Water Heater
Warm Climate
ProgressivTube
• Solar Hot Water Passive
system
• Easy to install and
maintain; no moving
parts
• Storage tank must be
installed above or close
to collector
• Uses no electricity; will
function during
blackouts
• Price range:
$1,700.00 – $2,600.00		 Moderate Climate
Helio-Pak
• Active Solar Hot Water,
flat plate type
• Pumps, valves &
controllers assist in the
prevention of freezing
• Tanks do not need to
be installed above or
close to collectors
• Uses electricity; will not
function during
blackouts
• Price range:
$2,200.00 – $5,200.00		 Cold Climate
TrendSetter
• Solar Hot Water Active,
evacuated tube
• Heavy-duty residential
and commercial
• Additional applications:
Water heating, Radiant
floor heating, Space
Heat
• Price range:
$6,000.00 – $17,000.00

Need help or want a Fully Installed System?

We have over 35,000 satisfied customers served since 1986!
Solar Direct has over 25 years of experience in commercial and
residential solar hot water product installation. Services are available
throughout the U.S. with our national installer network.

Contact Us for installation and product information, our team of Product Solution Specialists are standing by to take your calls.

Solar Water Heater installationSolar Water Heating technologies are a simple, reliable, and cost-effective harnessing the sun’s energy to provide for the solar thermal energy needs of homes and businesses. And now the new Energy Policy Act of 2005 allows you receive a federal tax credit worth 30% of the system cost! This is the best time to reap the numerous benefits of solar power!

  • Financial solar rebates available
  • Easy Do-It-Yourself Kits
  • Professional Solar Installations
  • Low Investment – High Return
  • Savings pay for system in 3-5 years

:}

So what are you waiting for?

( http://www.youtube.com/watch?v=jeJeL8Ued3s&feature=related  )

:}

Feds Tax Credits For Solar Panels – One for every roof in America

Posted on by
5

If we had been this aggressive for the last 30 years. We would have a green economy and we would be skipping all of the problems we have right now. The world would have followed suit and our species would not be in the danger it is now. Grousing doesn’t help though..First the Tax Credits…

Not there silly over here

http://www.energystar.gov/index.cfm?c=products.pr_tax_credits#s4

Solar Energy Systems

Photovoltaic Systems Photovoltaic systems must provide electricity for the residence, and must meet applicable fire and electrical code requirement. 30% of cost Use IRS Form 5695 PDF Exit ENERGY STARMust be placed in service before December 31, 2016.

:}

You’ll never guess who is doing it.

http://www.bp.com/genericcountryjump.do?categoryId=9070&contentId=7038143

Partner with BP Solar

Tools

How to buy

 

Request more information

 

Rebates and incentives

 

Solar savings estimator

 

Is solar right for me?

 

 

 

 

Visit us at the PV America conference, booth 1303

June 8-10 in Philadelphia, Pennsylvania

 

Teichert home

Home solutions

Industry leading solar solutions

Solar panels in a field

Business solutions

Save money, improve your brand

Builder installing panels

Builder solutions

 

Press releases

BP Solar to supply PV power systems for major retailer in California
22 April 2009

BP Solar lowers cost in drive toward grid-competitive electricity prices
31 March 2009

BP Solar to develop 37MW in projects for Long Island Power Authority
11 March 2009

Colorado Governor Bill Ritter dedicates new solar power system at CSU-Pueblo
13 January 2009

BP Solar announces completion of solar power pilot project
18 December 2008

 

:}

 

Now they are real proud of it. What does the future hold?

 

http://www.siliconsolar.com/flexible-solar-panels.html

 

 

Flexible Solar Panels – Consumer Ready Modules – OEM

Solar Store

Silicon Solar › Solar Panels › Flexible Solar Panels

Flexible Solar Panels: The lightest thin film flexible solar panels on today’s market are available from Silicon Solar.

Solar technology has reached its most convenient, lightweight form: the newly-engineered flexible solar panel. Silicon Solar is the proud carrier of over 50 modules of flexible solar panels, offered in a variety of sizes.

Through recent developments, Silicon Solar has provided ways of listing thin, light weight, flexible solar panels allowing for multiple applications to now be solar accessible that never were before.

Thin Film solar cells and panels now allow for several types of application to be introduced into the market including solar backpacks, solar thin film clothing and athletic apparel. We at Silicon Solar have taken these methods to the extreme and receive requests from customers who give us incentive and constructive feedback on developing new ways of utilizing this technology not only for them, but for you as well. Each flexible solar panel can be rolled up to 2 inches in diameter, making the paper thin solar cell one of the most durable and long lasting solar modules on the market.

:}

It is jam band Friday tomorrow and the topic is Solar Water Heaters. I know you can’t wait.

:}

Fed Tax Credits For Geothermal Heatpumps – Finally done with the boring stuff

Posted on by
2

Now we get to fill out form 5695. Not only that but the credits are good until 2016 when Obama retires. But first the Tax Credits.

Not there silly here:

http://www.energystar.gov/index.cfm?c=products.pr_tax_credits#c6

Geo-Thermal Heat Pump Geo-Thermal Heat Pump Same criteria as ENERGY STAR:Closed Loop:
EER >= 14.1
COP >= 3.3Open Loop:
EER >= 16.2
COP >= 3.6Direct Expansion:
EER >= 15
COP >= 3.5		 30% of the cost All ENERGY STAR geo-thermal heat pumps qualify for the tax credit.Use IRS Form 5695 PDF Exit ENERGY STARMust be “placed into service” before December 31, 2016.

:}

In this day and age everybody should know what a geothermal heat pump is, but if not:

http://en.wikipedia.org/wiki/Geothermal_heat_pump

A geothermal heat pump (GHP) system is a central heating and/or air conditioning system that actively pumps heat to or from the shallow ground. It uses the earth as either a source of heat in the winter, or as a coolant in the summer. This design takes advantage of moderate temperatures in the shallow ground to boost efficiency and reduce operational costs. It may be combined with solar heating to form a geosolar system with even greater efficiency.

Geothermal heat pumps are also known by a variety of other names, including geoexchange, earth-coupled, earth energy, ground-source or water-source heat pump. The engineering and scientific community tend to prefer the terms “geoexchange” or “ground-source heat pumps” because very little of the heat originates from true geological sources.[1] Instead, these pumps draw energy from shallow ground heated by the sun in the summer. Genuine geothermal energy from the core of Earth is available only in places where volcanic activity comes close to the surface, and can usually be extracted without the help of a heat pump.

:}

Anyway the first one on the list is my favorite becaused the closed loop is the most flexible. You can run the piping horizontal to the ground if there are mining issues. Or you can go straight down like a well.

http://www.residential.carrier.com/products/geothermalheatpumps/gt-px.shtml

GT-PX Geothermal Heat Pump

Compare Products

 

Ultra-High-Efficient Geothermal Unit for Total Home Comfort

Carrier’s popular GT-PX series is our highest rated geothermal unit, featuring Puron® refrigerant; a two-stage compressor for efficiency; variable speed blower for comfort; E-coated coil; microprocessor control; and a robust, insulated cabinet for quiet operation. Available in vertical top flow, vertical bottom flow and horizontal flow, all with optional hot-water generator. In sizes from 2 through 6 tons.

:}

I used to be fascinated by Open  Loop systems because they seem so natural. Essentially if you are near a lake or a deep pond you vent your waste heat there. But now I see them as potential environmental disruptors but again this about tax credits. They don’t really care about the environment.

 http://www.bryant.com/products/geoheatpumps/index.shtml

Compare

 

GT-PX Geothermal

GT-PX Geothermal

  • Up to 4.6 COP (closed loop)
  • Up to 27.0 EER (closed loop)
  • Up to 5.1 COP (open loop)
  • Up to 31.5 EER (open loop)
  • Two-stage unloading scroll compressor
  • Variable speed blower motor
  • Puron® refrigerant
  • 10-year limited warranty on all compressor & major refrigeration components. 5-year limited warranty on other parts

 

GT-PG Geothermal

GT-PG Geothermal

  • Up to 4.2 COP (closed loop)
  • Up to 20.2 EER (closed loop)
  • Up to 5.1 COP (open loop)
  • Up to 28.1 EER (open loop)
  • Single stage scroll compressor
  • PSC blower (optional variable speed blower motor)
  • Puron refrigerant
  • 10-year limited warranty on all compressor & major refrigeration components. 5-year limited warranty on other parts

GT-G Geothermal

GT-G Geothermal

  • Up to 3.8 COP (closed loop)
  • Up to 18.5 EER (closed loop)
  • Up to 4.1 COP (open loop)
  • Up to 23.9 EER (open loop)
  • Single stage scroll compressor
  • PSC blower (optional variable speed blower motor)
  • 10-year limited warranty on all compressor & major refrigeration components. 5-year limited warranty on other parts

GT-G Geotherm
:}

As you can see they all have open loop options because a heat exchanger doesn’t care where it puts it’s heat.

The final version is pretty exotic. I guess they are appropriate if you are in an extreme environment:

http://www.renovation-headquarters.com/heating-geothermal.htm

Direct Expansion (DX): A geothermal heat pump system in which the refrigerant is circulated in pipes buried in the ground, rather than using a heat transfer fluid, such as water or antifreeze solution in a separate closed loop, and fluid to refrigerant heat exchanger. A DX system includes all of the equipment both inside and outside the house. DX systems may be single or multi-speed.

http://www.mrslim.com/Products/subCategory.asp?ProductCategoryID=24&ProductSubCategoryID=140or

or

 http://www.alibaba.com/product/earthenergysolutions-11290116-10854411/Geothermal_Heat_Pump_Waterless_Direct_Expansion.html

or

http://www.geothermix.com/english/product/direct1.html

Direct Expansion “DX” Units

A direct earth coupled heat pump or “DX” heat pump is one that has its refrigerant evaporator / condenser in direct thermal contact with the earth from which heat is either extracted from during the heating mode or introduced to during the cooling mode of operation.

The general refrigeration cycle of our DX machine is similar in nature to a conventional water-to-air or water-to-water heat pump in that there exist a compressor, expansion device, reversing valve, and refrigerant-to-air heat exchanger. Conventional technology concerned with heat pumps relies upon the transfer of heat from the ground by means of a secondary heat exchanger system and working fluid, e.g., water, which is pumped to the geothermal unit located in the heated structure. The conventional heat pump has it’s own internal primary heat exchanger which extracts heat (heating mode) or rejects heat (cooling mode) from this water, which is then pumped back to the earth to be reheated.

DX systems similarily use a ground coil system, however, the working fluid is a refrigerant and the copper groundloop is the primary heat exchanger. Such geothermal heat exchange is an efficient and effective way of achieving heat exchange in heating and air conditioning systems, and especially heat pump type systems. Since the ground temperature is relatively constant at 48 °F at a depth below the frost line, the available heat is constant.

DX Heat Cycle (Gif 11K)

The elimination of the secondary earth heat exchanger (typically plastic in nature) and its associated working fluid reduces the temperature difference required between the ground and the evaporating refrigerant yielding a higher suction pressure than a conventional system under similar circumstances and thus a higher efficiency.

:}

I like the closed loop the best:

If you are in Las Vegas and you need one installed try:

http://www.plumber-las-vegas.com

:}

Fed’s Tax Credits For Biomass Stoves – You are wondering what the heck are they

Posted on by
1

My great grandmother had what they called a six “hole” cast iron cob burning stove. The thing was monstrous. It cover one wall of the dining room and was probably 6 foot long. It had two ovens and and ash box across the front and warming shelfs across the top. It was called a 6 hole because it had six plates where burners would be on modern stoves. You could lift each plate with an iron utensil to throw fuel on the fire. It was pretty efficient but what it spit out the pipe was probably nasty depending on what was being burned. I say cob burning because that is what was burned up mostly. Cobs were probably pretty clean. But it could burn wood and coal too and those were probably pretty bad. The cobs were plentiful on the farm and they worked well for fry cooking which is mainly what she did, but for making coffee and baking it took a fuel source with a few more btus in their britches. Did I mention it took a huge amount of skill to operate? Well these things have gotten popular again as propane and natural gas prices rise. I tried to find a picture of it her old stove but I don’t remember who made it so all I can do is show you modern ones.

Let me say right off the bat…corn is somebody’s food and wood should never be burned except for camp fires and wienie roasts. This is my opinion. This is about tax credits not about what is moral. I mean really think about it…the IRS moral?

First the Tax Credits:

http://www.energystar.gov/index.cfm?c=products.pr_tax_credits#c5

Biomass Stove Biomass Stove Stove which burns biomass fuel5 to heat a home or heat water.Thermal efficiency rating of at least 75% as measured using a lower heating value. 30% of cost, up to $1,5002

:}

This is actually a sly ad for Bixby Stoves…Bixby’s are bad but geez – people ask me why I “accumulate” things? Well this is why:

http://www.ehow.com/how_2070503_choose-biomass-stove-heating.html

How to Choose a Biomass Stove for Heating

By Paul M. J. Suchecki, eHow Member Rating

Bixby's Max Fire

Bixby’s Max Fire

Rate:

(27 Ratings)All fossil fuels started as biomass, organic molecules transformed by time and pressure into oil, coal and gas. With high crude prices, consider taking a shortcut and burn biomass directly with a biomass stove made specifically for heating.

  1. 1

    Look into the latest designs. Modern technology has increased the efficiency of new stoves to where biomass fuels can lower your heating bills. If you use stoves fueled by pellets, you’ll burn recycled waste made from sawdust. Pellets are so consistent in shape that stoves can feed them automatically. Cornell University is currently doing research on generating grass pellets to fuel biomass stoves. This would be a great way to actually put lawn cuttings to use.

    Several new stoves have no resemblance to the pot bellied heaters of yore. There are attractive additions to any living area with windows to watch the flames. Who knows, you just might favor those dancing images over the television?

  2. Step 2

    Consider an American Made Stove by Bixby. Bixby Energy Systems has created a stove, the Max Fire, that burns not only pellets, but corn. It’s a high-tech marvel with push button starting, an auto hopper and thermostat control. This stove uses blowers to circulate hot air through your room. Ash is automatically purged from the burner every 45 minutes. The stove’s operation is controlled by an onboard computer that produces a combustion efficiency that Bixby says is more than 99 percent accurate. It will take just a little time to get used to the rattle of corn kernels automatically fed to the burner, but the stove owners I know don’t even notice that slight noise any more.

  3. Step 3

    Get one that doesn’t pollute the air. Today’s biomass stoves consume fuel cleanly in contrast to the smoke that spews from traditional wood burners. Many new stoves come with EPA-approved catalytic combusters that will burn off most of the polluting gases a process that can increase your stove’s efficiency by as much as 10 percent.

4

Anticipate the money you’ll save. Homeowners have been surprised by how much money they’ve saved by heating with biomass instead of fossil fuels. The key lies in finding fuel that is inexpensive and readily available where you live. In the farm belt, corn can be surprisingly cheap as fuel. I’ve personally talked with farmers who dedicate a portion of their crops to heating. In other areas, biomass as exotic as olive pits could do the job for very little.

Bixby claims that its biomass stoves pay for themselves in three to four years compared to heating with fossil fuel. Biomass stoves are a great step toward energy independence and are a serious option worth considering as the days shorten and we inevitably slink toward the colder weather of fall.

:}

There you have it buy Bixby or NOT. Maybe Croix:

http://cornburnersnd.com/whythestcroixworks.htm

Introducing the St Croix Line of Corn Burning Products; Featuring The St Croix SURE FIRE Technology!
A Line of Corn Stoves that work and are rapidly becoming the New Champion’s in the industry!

Why should you have to put up with products that don’t deliver what is promised?
What was needed in the Corn Stove industry  was a new design that actually burns the corn thoroughly. With incomplete burning you get an over abundance of black sooty ash and not as much heat. This produces large amounts of coal black ash which can easily build up to be a problem, plugging up the stove, choking the combustion air, filling the exhaust pipe, and covering the side of your house with black soot. This dirty burning requires a need for a total shutdown cleaning as much as twice a week.

Several years ago the Research and Development Department at Even Temp Inc. were told, “Fix what’s wrong with corn stoves.” They took three years and produced, “The Lancaster.” This corn stove is the front runner in an exciting line of Corn Stoves that work

:}

Or maybe you might want something that burns a little wood:

http://www.homeexpo.com

American Energy Systems Inc. – 1-800-495-3196
Manufacturer of corn, wood pellet, biomass & agri-fuel burning free-standing stoves, furnaces & fireplace inserts.
Hutchinson, MN 55350 www.magnumheat.com
Thelin Company Inc. – 530-273-1976
Thelin Co. Inc. is the only company in the world that manufactures state of the art Wood, Pellet and Gas stoves with an old time ‘Parlour, Pot Belly’ look. These hand-crafted heaters are meticulously made to the highest quality standards. Pellet stoves available with auto light and thermo control.
Grass Valley, CA 95945 www.thelinco.com
The Fireplace and Chimney Store – 888-992-9889
Flame and Napoleon woodstoves are of the highest quality, designed to give you years of satisfactory service. Each of these products will enhance the beauty of your home.
Vicksburg, MS 39180 www.fireplace-chimneystore.com
Fireplace Equipment – 972-783-6988
Fireplace essentials: glass doors, gas logs, free standing screens, log holders, damper hooks, bellows, firebacks, grates, log carriers, andirons, fenders, fire starters, fire crystals, rainbow rocks, gas keys and covers, firewood totes and much more.
Richardson, TX 75080 www.fireplacequipment.com

:}

But if I had my druthers it would be Biowaste Stoves instead. These guys started out pelletizing waste wood, but now they do corn stalks, sun flower stalks and heads…this is a much better solution:

http://www.pes-pellets.com/

Practical Environmental Solutions, Inc.

  • Producers of Biomass Power Pellets – A Premium Hardwood Pellet Fuel
  • Dealers for Quadra-Fire, St. Croix and Cumberland Corn and Pellet Stoves
  • Offering hearth pads, vent pipe, service plans and installations

    Why use Biomass Power Pellets?

We sell wood pellets by the bag, by the ton or by the semi-load. We can load
bulk pellets in any container you bring in, from a wagon to a trash can.
(Must give 48 hours notice).

A Family Owned And Operated Company

Contact us about being a
Biomass Power Pellet Dealer!

319-653-2180
408 North 12th Avenue • Washington, Iowa 52353

:}

Tax Credits For Standard Water Heaters – But who would buy these when you can have Solar

Posted on by
6

I am just posting these tax credits so people will know. I question why someone would buy a standard water heater when Solar water heaters are not that much more and are free over the life of the system (like forever).

http://www.energystar.gov/index.cfm?c=products.pr_tax_credits#c4

Water Heaters Gas, Oil, Propane Water Heater Energy Factor >= 0.82
or a thermal efficiency of at least 90%.		 30% of cost, up to $1,5002 All ENERGY STAR gas tankless water heaters will qualify.There are currently no ENERGY STAR qualified gas storage tank or gas condensing water heaters that qualify.View ENERGY STAR criteria for water heaters.For a partial list of qualifying products go to: Air-Conditioning, Heating, Refrigeration Institute (AHRI) Exit ENERGY STAR
Electric Heat Pump Water Heater Same criteria as ENERGY STAR: Energy Factor >= 2.0 30% of cost, up to $1,5002 All ENERGY STAR electric heat pump water heaters qualify for the tax credit.

:}

Of the above I like tankless and electric heat pump water heaters. Tankless I like the best:

http://www.rheemtankless.com/content/tankless/rheem/Residential.shtml

  • NEW 66 Direct Vent tankless model available
    • Temperature range from 85° to 140°
    • Great for homes with 2 to 3 bathrooms
    • Same great compact design
    • Gas inputs ranging from 11,000 to 180,000 BTUH, fully modulating
    • Adjustable for optimal use between sea level an 9,840 feet
    • 12-Year heat exchanger warranty
    • 5-Year limited parts warranty
    • 1-Year limited warranty
    • click here to learn more
  • Indoor and Outdoor Models Available (Applies to 53, 66, and 74 units after 7.1.08)
    • Available in Natural Gas and LP Models 12-Year Limited Warranty on Heat Exchanger *
    • 5-Year Limited Warranty on Parts *
    • 1-Year Limited Service Warranty
    • Continuous hot water
    • Energy saving design
    • Compact, space saving design
    • Intelligent electronic controls and sensors
    • Self diagnostic program
    • Digital display shows temperature setting and maintenance codes
    • Exclusive sensing burner technology
    • Exclusive film wrap overheat limiter
    • Built-in electric blower
    • Indoor units use Category III stainless steel vent
    • Indoor models supplied with a 120 Volt power cord
    • Low NOx emissions meet SCAQMD rule 1146 requirements
    • A remote control thermostat is included with all models (100 F – 140 F setpoint range) Requires 18 AWG, 2 conductor thermostat wire for remote control connection. Wire not included.
    • Optional additional remote controls are available

:}

Or:

http://www.noritz.com/homeowners/products/

NOTE: Noritz America does not offer fuel oil or electric tankless water heaters.

PLEASE CLICK ON HEATER IMAGES FOR MORE DETAILS.

Noritz tankless gas water heaters are designed and manufactured with 3 key factors in mind:

1. Energy savings
Using advanced water heating  technology, our on-demand systems are manufactured for high efficiency (83-94%). Noritz energy efficient hot water heaters can cut your current water heating costs up to half and conserve wasted energy spent on heating a traditional tank water heater. Noritz tankless gas hot water heaters are designed to ensure all of your hot water needs are met efficiently.

2. Space Savings & Durability
The space saving design of Noritz tankless gas water heaters allow for installation virtually anywhere, indoor or outdoor.  Our compact water heaters conserve space and emit low levels of CO2, providing a cleaner environment for you to live in.  Wall-mounted, saving valuable space, these compact water heaters are extremely durable and provide an extended long life capacity.

3. Safety & Assurance
Noritz tankless hot water heaters are always hot, providing endless hot water for all of your needs. We care for your safety and comfort, ensuring a hot water heater that is safe and convenient for everyone to use. The electronic Advanced Q Function control system helps prevent scalding dangers and sudden bursts of cold water, minimizing discomfort. Noritz designs and manufactures each tankless hot water heater with the user in mind, ensuring quality workmanship, parts and service. 

  • AVAILABLE MODEL TYPES

Noritz offers RESIDENTIAL and COMMERCIAL tankless gas (NG & LP) water heaters for 1 – 5 showers.  Noritz heaters are also linkable (via Quick-Connect or Multi-System) up to 24 units.  We also have the NH series which is specifically designed to heat homes.  The NH series can be use for such applications as floor heating, baseboards, radiators and driveways.

  • INSTALLATION COSTS

Noritz is the manufacturer and therefore do not offer installation services.  We rely on our trained installers to offer their professional services and workmanship.  Each home is different and unique so the installation price will range depending upon the amount of additional parts and labor involved.  Here are some factors that will affect the installation price:  Installation location (attic, basement, garage, outdoors, relocation, etc.), Venting pieces (direct vent, vertical, horizontal, etc.), Gas line upgrade (3/4″ gas line from gas meter), and Accessories (service valves, ScaleShield, etc).

:}

Electric Heat Pump Water Heater? Kind of a weird use of technology. I won’t say over kill but it is like a car that can turn into a boat. I f you are going to go geothermal why not go all the way..?

http://www.toolbase.org/Technology-Inventory/Plumbing/heat-pump-water-heaters

Summary

Heat pump water heater.Heat pumps have traditionally been used for space conditioning, but are now also being used for electric water heating. They are usually three times more efficient than electric resistance water heaters–meaning that they can produce the same amount of hot water for one-third the amount of electricity. Stand-alone heat pump water heaters (HPWH), which are described here, are different from heating and cooling heat pump systems that have integrated water-heating capability.

There are four basic types of stand-alone HPWH. The heat pump can be integrated with or separate from the hot water storage tank, and cool exhaust air can be exhausted to the room or to the outdoors (see Figures). Because HPWH take heat from the surrounding room air, they cool and dehumidify a space. This is a benefit during the cooling season and a drawback during the heating season.

An add-on HPWH can be used to convert an electric resistance water heater into a heat pump water heater. The optimum locations would be in a utility room, garage or basement; the unit requires air circulation to work effectively.

A typical residential HPWH can heat 15 gallons of water per hour by 80°F, with a final storage temperature between 120°F and 140°F. At the same time, a HPWH provides some room cooling. During the heating season, this incidental cooling increases space heating needs.

A typical residential HPWH draws less than one-third the power of a standard electric resistance heater. Some HPWH models only require 110v electricity, making them ideal for the “do-it-yourself” home owner.

:}

More tomorrow if I don’t kill myself first

http://www.youtube.com/watch?v=wMD7Ezp3gWc

:}

Hungarian Vulcan Association Combined – Thats right HVAC Fed Tax Credits

Posted on by
1

(and its Jam Band Friday – http://www.youtube.com/watch?v=xwGL5LDb4u8  )

If you think that I am going to cover all the Energy Efficient HVAC options covered by these credits you would be out of your mind…It would take for ever. Even though it is Jam Band Friday and I could just sit around and listen to Eric Clapton all day. But first the Tax credits:

 http://www.energystar.gov/index.cfm?c=products.pr_tax_credits#c3

HVAC Central A/C Split Systems:
EER >=13
SEER >= 16Package systems:
EER >= 12
SEER >= 14		 30% of cost, up to $1,5002 For a list of qualified products, read this FAQ.Note — not all ENERGY STAR products will qualify for the tax credit. View ENERGY STAR criteria.
Air Source Heat Pumps Split Systems:
HSPF >= 8.5
EER >= 12.5
SEER >= 15Package systems:
HSPF >= 8
EER >= 12
SEER >= 14		 30% of cost, up to $1,5002
Natural Gas or Propane Furnace AFUE >= 95 30% of cost, up to $1,5002 For a partial list of qualifying products go to: Air-Conditioning, Heating, Refrigeration Institute (AHRI) PDF Exit ENERGY STARNot all ENERGY STAR products will qualify for the tax credit. View ENERGY STAR criteria for furnaces, boilers.
Oil Furnace AFUE >= 90 30% of cost, up to $1,5002
Gas, Propane, or Oil Hot Water Boiler AFUE >= 90 30% of cost, up to $1,5002
Advanced Main Air Circulating Fan No more than 2% of furnace total energy use. Read this FAQ if the fan qualifies, but the furnace does not. 30% of cost, up to $1,5002

(http://www.youtube.com/watch?v=hnz-wd9uMrY )

:}

I can not believe that they are still offering tax credits for home heating oil furnaces. That is so late 1800s. The idea that they would be still supporting boilers for gods sake is so 1940s. Proof  That some things never go away. While I much prefer ground based heat pumps Open Air heat pumps are just OK.

( http://www.youtube.com/watch?v=98XqT4kBWT4 )

Air Source Heat Pumps Split Systems:
HSPF >= 8.5
EER >= 12.5

SEER >= 15

http://www.qualitysmith.com/heat_pump/?src=got0058515ch001pGoogleAdWordsSearch&refcd=GO550t1257028S_air_source_heat_pumps&tsacr=GO2982392887

Find the Perfect Home Heating System

QualitySmith contractors will help you make the best heating system decision for your home and budget. Our partner contractors will walk you through the benefits and features associated with different system types. Just fill in our simple form to find 3 prescreened, reputable heating system contractors to help you make sure you’re ready for cold weather.

:}

For a much broader discussion of this plus everything else under the sun:

http://www.century-ac.com/consumer_tax_incentives.htm

What are the efficiency requirements to qualify for the credits?

Manufacturers and retailers should be able to help you tell whether a specific product qualifies.

The qualification specifications are:

  • Furnaces and Boilers: Natural gas & propane furnaces must meet an Annual Fuel Use Efficiency (AFUE) 95 or higher, oil furnaces and gas, oil and propane boilers must meet an AFUE of 90 or better.
  • Central Air Conditioning Units:
    • Central air conditioning units and air-source heat pumps must meet the highest tier standards set by the Consortium for Energy Efficiency (CEE) as of February 17, 2009, which in most cases requires a Seasonal Energy Efficiency Ratio (SEER) of 16. SEER measures performance throughout the cooling season. More information on the CEE specification.
  • Biomass Stoves: Stoves must have a thermal efficiency of 75% as measured using a lower heating value, and be used to heat a dwelling unit or heat water for use in the same. The law defines biomass fuel as anything from agricultural crops, trees, wood wastes & residues to pellets, plants, grasses and fibers.
  • Fans for heating and cooling systems: fan uses no more than 2% of total heating system energy use, as defined by DOE test procedure. For more information, see the Gas Appliance Manufacturers Association web site. It is still unclear how the 2009 Stimulus legislation has impacted this incentive – it seems reasonable to assume that the cost basis will be the reasonable cost of the fan, not the entire furnace. IRS has yet to issue specific guidance on this issue.
  • Water Heaters:
    • Gas or propane water heaters—Energy Factor of at least 0.82, or a thermal efficiency of at least 90%.
    • Heat pump water heaters—Energy Factor of at least 2.0

Where must the equipment be used?

Under guidance issued by the IRS, equipment is eligible if installed in a home occupied by a taxpayer as their principal residence at the time the equipment is installed. This implies that equipment in new homes is generally not eligible since in new homes equipment is generally installed prior to occupancy. However, efficient equipment in new homes can help that home qualify for the new home tax credit.

:}

(There was so much more then Layla from Derek and the Dominos –http://www.youtube.com/watch?v=gxAKPBrjvqI )

If you are interested in the State Tax Incentives for Energy Efficient HVAC equipment here is an excellent site.

http://energytaxincentives.org/general/incentives.php

State and Utility Incentives

In addition to the federal tax incentives, complementary incentives may be available from your state or local utility. For information on many of these programs, see these links:

:}

When in doubt you can always shop at SEARS

http://www.searshomeimprovements.com/ProductOffer1.aspx?OVMTC=Broad&site=&creative=2768202091&OVKEY=heat+pumps&gclid=CNHe7pK-85oCFQ3yDAodtlirdw&o=2&t=102&primary=true

Your choice in a home improvement company is a big decision. Choose a company you can trust for reliable products, service, installation and peace of mind on one of your biggest investments – your home. Choose Sears!

Reduce Energy Costs and get up to a $1500 Tax Credit from the 2009 Stimulus Package with a new Heating & Cooling System


As your heating & cooling system ages, it can lose its ability to heat or cool your home. Enjoy comfort year round with a new Heating & Cooling System for Sears.
:}

Gosh just like mom and pops

(http://www.youtube.com/watch?v=AscPOozwYA8 )

:}

Metal Roofing And Reflective Roofing – I told you I would get to Chu’s call

Posted on by
2

If you are reading this please click on our gooogle ads…CES is a nonprofit agency and we need all the money we can raise..THANKS

I used to say that the quickest way to green was WHITE. Simply painting your roof white with a durable white paint and backing that with a radiant barrier could cut cooling cost in the summer. People would say, “You don’t want to block heat in the winter.” Yah BUT that is a different issue. I always ask people to stay on topic because energy consumption is a complex issue and we must save energy where ever we can when ever we can.

First the Tax Code:

 http://www.energystar.gov/index.cfm?c=products.pr_tax_credits#c7

Roofing Metal Roofs,
Asphalt Roofs		 All ENERGY STAR qualified metal and reflective asphalt shingles 30% of cost, up to $1,5002 View our FAQ on roofs that qualify for the tax credit

:}

Then the rationale:

http://www.alternet.org/environment/140287/obama%27s_climate_guru:_paint_your_roof_white!/

Some people believe that nuclear power is the answer to climate change, others have proposed green technologies such as wind or solar power, but Barack Obama’s top man on global warming has suggested something far simpler — painting your roof white.

Steven Chu, the US Secretary of Energy and a Nobel prize-winning scientist, said yesterday that making roofs and pavements white or light-coloured would help to reduce global warming by both conserving energy and reflecting sunlight back into space. It would, he said, be the equivalent of taking all the cars in the world off the road for 11 years.

Speaking in London prior to a meeting of some of the world’s best minds on how to combat climate change, Dr Chu said the simple act of painting roofs white could have a dramatic impact on the amount of energy used to keep buildings comfortable, as well as directly offsetting global warming by increasing the reflectivity of the Earth.

“If that building is air-conditioned, it’s going to be a lot cooler, it can use 10 or 15 per cent less electricity,” he said. “You also do something in that you change the albedo of the Earth — you make it more reflective. So the sunlight comes down and it actually goes back up – there is no greenhouse effect,” Dr Chu said.

:}

Why backed by a radiant barrier? Because light is made up of different lengths of waves. Loosely stated there are  short wave lengths of light and long wave lengths of light. The short wave lengths bounce off the white but the long wave lengths keep on trucking.

So if you are putting a new roof on your first consideration is a metal roof:

http://www.metalroofing.com/

Appreciate Your Home with Quality Metal Roofing

If you’ve been considering upgrading your home and increasing its resale value, you should know that beautiful and enduring metal roofing is highly valued as one of the top renovation-friendly building materials for rehabbers and new home builders alike.

With resale values of up to 139% (Miami, FL), you can enjoy quality metal roofing on your home at virtually no cost!

As reported by Sal Alfano of Remodeling Magazine, homes renovated with standing-seam metal roofing show a rate of 85.9% cost recouped in the national average with up to 95.5% for homes in the Eastern states, a full 1 and 6% resale value gain over homes roofed with asphalt. And with all the added safety and longevity associated with quality metal roofing matching installation job costs that reach only one half of that of cosmetic room remodeling averages or even one eighth of that of a master suite addition, you hardly deny the sense in upgrading.

Find the Average Metal Roof Value in Your Area:

The following table shows average values associated with a typical roof renovation of 30 squares of standing seam metal, formed on-site into16-inch panels using factory-enameled roll steel (all seams double-locked) with brake-bent flashing from same material for drip edge and all flashing at roof-wall intersections, a 5-square hip roof with custom flashing at two average-sized skylights, a custom cap treatment, all applied over a new felt underlayment with rubberized asphalt membranes at eaves, valleys and all penetrations.

Market Job Cost Resale Value Cost Recouped

:}

Too pricey for your blood? Well then try reflective shingles.

http://findarticles.com/p/articles/mi_m0EIN/is_2005_March_2/ai_n11838044/

Elk and 3M Pioneer the First Reflective, Colored Asphalt Shingle

Business Wire ,  March 2, 2005

DALLAS — ElkCorp’s (NYSE:ELK) subsidiary, Elk Premium Building Products, Inc., (Elk) in a joint effort with 3M (NYSE:MMM) Industrial Mineral Products Division, introduced today the innovative Elk Cool Color Series shingle. Elk has created the first reflective, colored asphalt shingle, featuring 3M(TM) Cool Roofing Granules, that meets the initial performance levels of the ENERGY STAR(R) Program.

In the past, asphalt shingles meeting these reflectivity requirements were only available in white. Elk’s Cool Color Series shingle marks the first of its kind to offer homeowners energy efficient asphalt shingles in a choice of earth-toned colors.

More Articles of Interest

“3M innovation led to the development of the 3M Cool Roofing Granules,” said 3M division vice president Greg Linnerooth. “The color palette is up to three times more reflective than comparable typical colored granules. The benefit of more highly reflective granules is the potential energy savings for homeowners, while providing a wide variety of beautiful shingle color blends they have come to expect. Homeowners now have a colorful alternative to white-only shingles.”

Elk Cool Color Series is the result of joint development program with 3M, the world’s leading manufacturer of roofing granules. The effort has produced a reflective asphalt shingle with all of the natural beauty of Elk’s color palette. The energy efficient shingles are the first offered in earthy hues, lighter versions of popular Elk colors: Cool Weatheredwood, Cool Antique Slate and Cool Barkwood. Prestique Cool Color Series shingles carry a 40-year limited warranty and up to a 90 mph limited wind warranty with special application technique(a).

Elk also offers Domain(R) Winslow(R) in its Cool Color Series, a large-scale, wood-shake look shingle available in the Cool Browncastle shade and boasts a 50-year limited warranty and up to a 110 mph limited wind warranty with special application technique(a) (Special application technique is required. See product limited warranty for complete details at www.elkcorp.com).

:}

The point of all of this is keep weather out and energy in.

:}

Insulation – Why buy something and throw part of it away

Posted on by
Reply

Would you buy a Soda Pop and poor part of it down the drain? Well why would anybody buy energy and cast it into the open air? It is dumb but hundreds of millions of Americans do it every year. There are some experts who argue that we can’t make our appliances or buildings with too much insulation or too “tight” because we have got to breathe. I am not one of those. I believe that air quality can be handled through a heat exchanger:

http://www.lennox.com/badair/beat//ventilation.asp

Many people want to start the discussion there however and I have learned to stop that, by simply saying, “how much insulation do you have in your house”, because no one has enough. At any rate here is what you can get from the Feds;

(while I am thinking about it you can get rebates at the State and local level. I may discuss some of that but geeze there are 50 states and probably 7,000 counties in the US. Most of that info you WILL have to check on your own)

http://www.energystar.gov/index.cfm?c=products.pr_tax_credits#c2

Insulation Insulation Meets 2009 IECC & Amendments 30% of cost, up to $1,5002 For insulation to qualify, its primary purpose must be to insulate (example: insulated siding does not qualify).Must be expected to last 5 years OR have a 2 year warrantyCheck to see if you have Home Performance with ENERGY STAR in your areas. Adding insulation to your home is covered.

:}

It is pretty straight forward:

Introduction

Why Insulate Your House?Heating and cooling account for 50 to 70% of the energy used in the average American home. Inadequate insulation and air leakage are leading causes of energy waste in most homes. Insulation:
  • saves money and our nation’s limited energy resources
  • makes your house more comfortable by helping to maintain a uniform temperature throughout the house, and
  • makes walls, ceilings, and floors warmer in the winter and cooler in the summer.

The amount of energy you conserve will depend on several factors: your local climate; the size, shape, and construction of your house; the living habits of your family; the type and efficiency of the heating and cooling systems; and the fuel you use. Once the energy savings have paid for the installation cost, energy conserved is money saved – and saving energy will be even more important as utility rates go up.

This fact sheet will help you to understand how insulation works, what different types of insulation are available, and how much insulation makes sense for your climate. There are many other things you can do to conserve energy in your home as well. The Department of Energy offers many web sites to help you save energy by sealing air leaks, selecting more energy-efficient appliances, etc.

How Insulation Works Heat flows naturally from a warmer to a cooler space. In winter, the heat moves directly from all heated living spaces to the outdoors and to adjacent unheated attics, garages, and basements – wherever there is a difference in temperature. During the summer, heat moves from outdoors to the house interior. To maintain comfort, the heat lost in winter must be replaced by your heating system and the heat gained in summer must be removed by your air conditioner. Insulating ceilings, walls, and floors decreases the heating or cooling needed by providing an effective resistance to the flow of heat.
Batts, blankets, loose fill, and low-density foams all work by limiting air movement. (These products may be more familiarly called fiberglass, cellulose, polyicynene, and expanded polystyrene.) The still air is an effective insulator because it eliminates convection and has low conduction. Some foams, such as polyisocyanurate, polyurethane, and extruded polystyrene, are filled with special gases that provide additional resistance to heat flow.Reflective insulation works by reducing the amount of energy that travels in the form of radiation. Some forms of reflective insulation also divide a space up into small regions to reduce air movement, or convection, but not to the same extent as batts, blankets, loose-fill, and foam.

Next Section – Which Kind of Insulation is Best?

:}

But there is a dizzying array of products:

The different forms of insulation can be used together. For example, you can add batt or roll insulation over loose-fill insulation, or vice-versa. Usually, material of higher density (weight per unit volume) should not be placed on top of lower density insulation that is easily compressed. Doing so will reduce the thickness of the material underneath and thereby lower its R-value. There is one exception to this general rule: When attic temperatures drop below 0?F, some low-density, fiberglass, loose-fill insulation installations may allow air to circulate between the top of your ceiling and the attic, decreasing the effectiveness of the insulation. You can eliminate this air circulation by covering the low-density, loose-fill insulation with a blanket insulation product or with a higher density loose-fill insulation.

Blankets, in the form of batts or rolls, are flexible products made from mineral fibers, including fiberglass or rock wool. They are available in widths suited to standard spacings of wall studs and attic or floor joists. They must be hand-cut and trimmed to fit wherever the joist spacing is non-standard (such as near windows, doors, or corners), or where there are obstructions in the walls (such as wires, electrical outlet boxes, or pipes). Batts can be installed by homeowners or professionals. They are available with or without vapor-retarder facings. Batts with a special flame-resistant facing are available in various widths for basement walls where the insulation will be left exposed.
Blown-in loose-fill insulation includes cellulose, fiberglass, or rock wool in the form of loose fibers or fiber pellets that are blown using pneumatic equipment, usually by professional installers. This form of insulation can be used in wall cavities. It is also appropriate for unfinished attic floors, for irregularly shaped areas, and for filling in around obstructions.
In the open wall cavities of a new house, cellulose and fiberglass fibers can also be sprayed after mixing the fibers with an adhesive or foam to make them resistant to settling.
Foam insulation can be applied by a professional using special equipment to meter, mix, and spray the foam into place. Polyisocyanurate and polyurethane foam insulation can be produced in two forms: open-cell and closed-cell. In general, open-celled foam allows water vapor to move through the material more easily than closed-cell foam. However, open-celled foams usually have a lower R-value for a given thickness compared to closed-cell foams. So, some of the closed-cell foams are able to provide a greater R-value where space is limited.
Rigid insulation is made from fibrous materials or plastic foams and is produced in board-like forms and molded pipe coverings. These provide full coverage with few heat loss paths and are often able to provide a greater R-value where space is limited. Such boards may be faced with a reflective foil that reduces heat flow when next to an air space. Rigid insulation is often used for foundations and as an insulative wall sheathing.
Reflective insulation systems are fabricated from aluminum foils with a variety of backings such as kraft paper, plastic film, polyethylene bubbles, or cardboard. The resistance to heat flow depends on the heat flow direction, and this type of insulation is most effective in reducing downward heat flow. Reflective systems are typically located between roof rafters, floor joists, or wall studs. If a single reflective surface is used alone and faces an open space, such as an attic, it is called a radiant barrier.Radiant barriers are installed in buildings to reduce summer heat gain and winter heat loss. In new buildings, you can select foil-faced wood products for your roof sheathing (installed with the foil facing down into the attic) or other locations to provide the radiant barrier as an integral part of the structure. For existing buildings, the radiant barrier is typically fastened across the bottom of joists, as shown in this drawing. All radiant barriers must have a low emittance (0.1 or less) and high reflectance (0.9 or more).

Previous Section – Introduction
Next Section – Insulating a New House

:}

People used to ask me if I had a preference and for the longest time I did. Now I just say get the most R’s for the lowest price. There is a nice guy from Pawnee, Kent Olson, that sells a hi tech version:

http://www.pawnee-lumber.com/

ESP Low-E

http://www.low-e.com/

:}

Working Through The Feds Energy Tax Credits…It is going to be a long couple of weeks

Posted on by
1

Let me start out with the statement: I AM NOT AND NEVER SHALL BE A TAX ACCOUNTANT. If you read anything here and apply it to your taxes without consulting one you are taking your life in your own hands. I will give you an example. My wife and I put a Metal Roof on our house last year. When we went to claim it on our taxes..WE Couldn’t!! Those crafty Bush people made it so the credits skipped every year…so they were effective in 2007 and 2009 but NOT 2008. God, I am so glad those people are gone.

So lets start with the frequently asked quests and go from there.

http://energystar.custhelp.com/cgi-bin/energystar.cfg/php/enduser/std_adp.php?p_faqid=5576&p_created=1235138592&p_sid=utTY71sj&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MjgsMjgmcF9wcm9kcz0zMTImcF9jYXRzPSZwX3B2PTEuMzEyJnBfY3Y9JnBfcGFnZT0x&p_li=&p_topview=1

How has the new Stimulus bill affected the tax credits for energy efficient home improvements?
  Answer
 

On February 17, 2009, President Obama signed the “Stimulus Bill” (The American Recovery and Reinvestment Act of 2009) that made significant changes to the energy efficiency tax credits. These changes apply to products ” placed in service” in 2009. The highlights are:

  • The tax credits that were previously effective for 2009, have been extended to 2010 as well.
  • The tax credit has been raised from 10% to 30%.
  • The tax credits that were for a specific dollar amount (ex $300 for a CAC), have been converted to 30% of the cost.
  • The maximum credit has been raised from $500 to $1,500 total for the two year period (2009-2010). However, some improvements such as geothermal heat pumps, solar water heaters, and solar panels are not subject to the $1,500 maximum.
  • The $200 cap on windows has been removed, but the requirements for windows (after June 1, 2009) has been increased significantly. Not all ENERGY STAR qualified windows will qualify after June 1, 2009.

Specific information on what is covered by the tax credits.

:}

What was available last year? (OH if only I had checked)

http://energystar.custhelp.com/cgi-bin/energystar.cfg/php/enduser/std_adp.php?p_faqid=5541&p_created=1233597206&p_sid=rBQTz1sj&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MjgsMjgmcF9wcm9kcz0zMTImcF9jYXRzPSZwX3B2PTEuMzEyJnBfY3Y9JnBfcGFnZT0y&p_li=&p_topview=1

  What tax credits were available in 2008 for energy efficiency home improvements?
  Question
 

What tax credits were available in 2008 for energy efficiency home improvements?
  Answer
 

The only energy efficiency improvements that are eligible for a tax credit in 2008 are:

  • geothermal heat pumps (30%, up to $2,000)
  • solar water heaters (30%, up to $2,000)
  • solar panels (30%, up to $2,000)
  • small wind energy systems (30%, up to $4,000)
  • fuel cells (30%, up to $500 per .5 kW of power capacity)

You need to file IRS Tax Form 5695 with your 2008 taxes to claim this credit.

Tax credits for windows, doors, insulation, HVAC, and non-solar water heaters (that were available in 2006 & 2007) are NOT available for products installed in 2008, but they are again eligible for products installed in 2009 and 2010.

More information on the tax credits for 2009 and beyond.

:}

What does your handyman get? Blisters hahahaha

http://energystar.custhelp.com/cgi-bin/energystar.cfg/php/enduser/std_adp.php?p_faqid=2426&p_created=1145981147&p_sid=rBQTz1sj&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MjgsMjgmcF9wcm9kcz0zMTImcF9jYXRzPSZwX3B2PTEuMzEyJnBfY3Y9JnBfcGFnZT0x&p_li=&p_topview=1

  Are installation costs covered by the tax credits?
  Question
  Are installation costs covered by the tax credits?
  Answer
 

Installation costs ARE COVERED for:

  • HVAC (Heating, Ventilation and Air Conditioning) systems
  • Biomass Stoves
  • Water Heaters (including solar)
  • Solar Panels
  • Geothermal Heat Pumps
  • Wind Energy Systems
  • Fuel Cells

The tax credit for HVAC, biomass stoves, and non-solar water heaters is 30% of the total cost (product + installation) up to $1,500. The law specifies installation costs include: “expenditures for labor costs properly allocable to the onsite preparation, assembly, or original installation of the property.”

The tax credit for solar water heaters, solar panels, geothermal heat pumps, wind energy systems, and fuel cells* is 30% of the total cost (product + installation), with no upper limit. The law specifies installation costs include: “labor costs properly allocable to the onsite preparation, assembly, or original installation of the property and for piping or wiring to interconnect such property to the home.”

Installation costs are NOT covered by the tax credit for:

  • Windows
  • Doors
  • Insulation
  • Roofs

The tax credit for windows, doors, insulation and roofs is for 30% of the cost of materials only, up to $1,500.  Read this FAQ on separating out the cost of installation for these products.

Learn more at: energystar.gov/taxcredits

*The tax credit for fuel cells is 30% of the cost, but limited to $500 per .5 kW of power capacity

:}

Got other questions? Of course you do it is the IRS after all

 http://energystar.custhelp.com/cgi-bin/energystar.cfg/php/enduser/std_alp.php?p_sid=J-2e9zrj&p_lva=&p_li=&p_accessibility=0&p_redirect=&p_page=1&p_cv=&p_pv=1.312&p_prods=312&p_cats=&p_hidden_prods=&prod_lvl1=312&p_search_text=&srch_btn_submit=%C2%A0%C2%A0%C2%A0GO%C2%A0%C2%A0%C2%A0&p_new_search=1

Question Question - Sort Descending (Z to A) Question - Sort Ascending (A to Z)

:}

Tomorrow – Doors and Windows…I can hardly wait. Oh and if you want this work done and you live in New York you might try:

http://www.remodeling-ny.com/

:}

Local 193 of the International Brotherhood of Electricians Announces a new Green Union Hall

Posted on by
2

I could have picked any number of Google “friendly” topics today like:

Gasoline prices rise Oil prices don’t – because I have long argued that the refiners will restrict production to raise prices because of the Speculator Driven Oil Shock of 2008.

Obama to announce new mileage standards – because I argued during the campaign that if Obama wanted a real energy policy change he would ban the sale of gasoline in anything other than 1 gallon containers. Gas driven cars would disappear overnight.

There is a local story however that needs to be covered. Local 193 of the IBEW is breaking ground for a new union hall later this month and it is going to be a doozy. Geothermal, Solar and Wind, the whole enchilada. God I have always wanted to say that.

While there is nothing up on their websites yet (hint hint)

http://www.unions.org/home/v-28641-13-IBEW-.htm

http://www.ibew193.com/

Nor do they list the Building Committee on there web site. Here is what one of their better writers, Tim Landis,  had to say in the State Journal Register. First in brief:

http://www.sj-r.com/business/x1393569371/Tim-Landis-Changes-to-Lincoln-Home-site-considered

The INTERNATIONAL BROTHERHOOD OF ELECTRICAL WORKERS 193 plans to break ground Friday for a union hall and training center at 3150 Wide Track Drive, just off Dirksen Parkway in Springfield.

According to the union, the “green building” will include solar panels that cover the roof, geothermal heating and cooling, and green space. Long-term plans are to add a wind-turbine. The training center will offer instruction in wind and solar technology.
The site is adjacent to the existing hall, which also will be upgraded once the new building is finished.

:}

Then in a longer piece that talks about the Greening of Central Illinois:

The International Brotherhood of Electrical Workers Local 193 has begun construction of a new administrative office and training center at 3150 Wide Track Drive, just off Dirksen Parkway, in response to “green” trends in energy and job training, said business manager David Burns. The local represents about 800 workers in nine area counties.

“We just think that the green concept is more than right around the corner. It’s here,” Burns said.

In addition to use of geothermal heating and cooling, the solar panels on the roof are expected to provide most of the building’s electrical needs. Long-term plans are to add a wind turbine. Once the new hall is completed, the existing hall will be demolished to make way for green space, including landscaping and a retention pond.

But it’s the 12,500-square-foot training center that is the centerpiece of the green strategy for the labor union.

Plans are to offer hands-on training to apprentices in solar and wind technology. A “green jobs training curriculum” will include 70 lessons.

Burns said members already work on solar and wind projects, large and small, but that the training required will become more sophisticated along with the technology.

“We believe the demand is going to continue to grow,” Burns said. “As the technology gets better and better, we’re going to have to train people.”

:}

He listed these jobs that could enlist Electricians:

Jobs of the future?
A state list of “green jobs” outlines the top jobs that should be available in coming years or that will require retraining as alternative energy use increases. Additional information is available at http://www.ilworkinfo.com.

Among the categories:
* Building retrofitting. Electricians, heating and air conditioning, carpenters, construction equipment operators, roofers, insulation workers, carpenter helpers, industrial truck drivers, building inspectors and construction managers.

* Smart grids. Computer software engineers, electrical engineers, electrical equipment assemblers, electrical technicians, machinists, construction laborers, operating engineers, electrical power line installers and repair technicians.
* Wind power. Environmental engineers, iron and steel workers, millwrights, sheet metal workers, machinists, electrical equipment assemblers, construction equipment operators, industrial truck drivers, industrial production managers and production supervisors.
* Solar power. Electrical engineers, electricians, industrial machinery mechanics, welders, welders, metal fabricators, electrical equipment assemblers, construction equipment operators, installation helpers, laborers and construction managers.

:}

Way to go 193!

:}