Category Archives: burning reduction methods

Tesla Puts Out A New Battery – The world goes apeshit

Posted on by
Reply

Why is Elon Musk worshiped so? He blows a rocket landing and everyone says it “Was nicely played”. In the passed week or so, his companies have both launched a space capsule about a mile in the air and brought it back to the ground my parachute. This was done 50 years ago by NASA. And announce a new battery for the residential housing market which is anything but new. He is a carny shill if ever I saw one. I shall continue this rant over at myspace/dougnicodemus  if anyone is interested.

https://www.scientificamerican.com/article/will-tesla-s-battery-for-homes-change-the-energy-market/

Will Tesla’s Battery for Homes Change the Energy Market?

Tesla did not reveal the price of its larger batteries for businesses and utilities, but it will sell residential models for $3,000—$3,500

May 4, 2015 |By Davide Castelvecchi and Nature magazine | Véalo en español

Tesla Motors, the electric-car maker based in Palo Alto, California, has announced that it will sell versions of its battery packs directly to consumers to help to power their homes, as well as to businesses that run larger facilities, and utility companies.

At a press conference in Los Angeles on April 30, the company’s charismatic founder Elon Musk said that the firm’s lithium-ion batteries would enable economies to move to low-carbon energy sources. Solar energy sources are erratic—but by storing their energy and then releasing it when required, batteries could solve that problem, he said.

Many other companies also sell stationary battery storage for buildings and for power grids—but analysts say that the technology is still too expensive for widespread use. Here, Nature explores whether Tesla’s announcement might change the game.

:}

Please go there and read. More next week.

:}

Smart Energy Labs – We need this in every State

Posted on by
Reply

I don’t care if you are a Red State or a Blue State. Who could be opposed to something like this?

http://www.greentechmedia.com/articles/read/New-York-to-Build-Worlds-Most-Powerful-Smart-Energy-Lab

New York to Build World’s Most Powerful Smart Energy Lab

Superior computing power will help drive New York’s REV.

Katherine Tweed
March 26, 2015

The New York Power Authority and SUNY Polytechnic Institute will partner to build the world’s largest research and development facility focused on energy technology innovation.

New York State has goals of eliminating electricity peaks, enabling distributed energy resources and incorporating more large-scale renewables as part of its Reforming the Energy Vision proposal.

The yet-to-be-built facility, the Advanced Grid Innovation Laboratory for Energy (AGILe), will allow the New York Power Authority, distribution utilities and private companies to test everything from sensors on the grid and automation technology to novel power electronics and cybersecurity across the entire power grid.

“This is new and innovative and will allow New York state to lead the country in energy development, smart grid and other technologies and provide economic benefit to the state,”

:}

Go there and read. More next week.

:}

Light A Third World House – With a used laptop battery

Posted on by
Reply

When I first saw this I thought it was from The Onion. But this for real.

http://www.technologyreview.com/news/532896/discarded-laptop-batteries-keep-the-lights-on/

Discarded Laptop Batteries Keep the Lights On

Millions of batteries discarded with computers have more than enough life to power home lighting for one year, researchers in India say.

Many of the estimated 50 million lithium-ion laptop batteries discarded every year could provide electricity storage sufficient to light homes in poor countries, researchers at IBM say.

In work being aired this week at a conference in San Jose, researchers at IBM Research India in Bangalore found that at least 70 percent of all discarded batteries have enough life left to power an LED light at least four hours a day for a year.

While it’s possible to combine LED lights with solar panels and rechargeable batteries (see “Innovators Under 35: Evans Wadongo”), using discarded batteries could make the approach far cheaper.

“The most costly component in these systems is often the battery,” says Vikas Chandan, a research scientist at the lab’s Smarter Energy Group, who led the project. “In this case, the most expensive part of your storage solution is coming from trash.”

:}

Go there and read more. More next week.

:}

Micro Housing Units – Save energy by thinking small

Posted on by
Reply

We Americans created sprawl and with it a massive amount of energy consumption. Could this be one of the answers?

http://www.businessinsider.com/nyc-micro-apartments-under-construction-2015-2

New York City’s first ‘micro apartments’ are coming this spring — here’s what they’ll look like

  • Feb. 23, 2015, 10:18 AM

In 2013, a project called My Micro NY won a design competition for the New York’s first “micro apartments” sponsored by the Department of Housing Preservation and Development.

Intended to create affordable housing for singles in New York City, those promised prefabricated affordable units are finally being assembled in the Brooklyn Navy Yard and will be unveiled this spring in Manhattan’s Kips Bay, according to The New York Times.

The city’s first “micro” building will have 55 rental apartments, all ranging from 260- to 360-square-feet with big windows, ample storage space, and Juliet balconies.

Because the architects believed amenities are important to micro-unit dwellers, the building will also have a public meeting space, café, and common rooftop garden for residents, as well as a laundry room, residential storage space, a bike room, and fitness space.

:}

Go there and read a little (chuckle). More next week.

:}

Geothermal Energy Will Save Money All Over The House – But it’s not cheap

Posted on by
Reply

My sister-in-law Mari Whitney and her  husband Dick installed a house sized unit at their house in Mason City and it saves them a bunch of money. But the payback is loooong.

 

https://www.centralilfoodbank.org/

https://www.centralilfoodbank.org/documents/AnnualReportFinalPDFWeb.pdf

The Foodbank Goes Green
One of the first 50 wells being drilled in October2014.
This fall work began on an estimated $850,000 geothermal
project that will help cut utility costs at the Foodbank’s 56,000 square
foot facility. The geothermal projectwill help heat and cool a portion of
the building.
50 wells were dug 200 feet deep in the open lawn on the east
side of the Foodbank’s Cook Street location to install a closed loop
geothermal heating and cooling system in the ground.
The system will use the earth as a heat source in the winter and
a heat sink in the summer, resulting in significantly lower energy
consumption.

:}

Go there and read the whole site. Look around. More next week.

:}

Saving Energy In The Bathroom – Well this is turning out to be way too easy

Posted on by
Reply

This is the course I have set for the next few weeks, so bear with me,

 

http://en.vorweggehen.de/energy-efficiency/top-five-energy-saving-tips-for-the-bathroom/

The top five energy-saving tips for the bathroom!

Electric razors or toothbrushes, a long soak in a bubble bath and an on-demand water heater can all affect energy consumption in the bathroom. Read our energy-saving tips for the bathroom to find out how you can save energy without having to do without modern technology.

Energy-saving tips for the bathroom – tip #1: Save water

A dripping tap is not only a nuisance, – it also increases your water consumption. Up to 20 litres can disappear down the plughole unused over the course of a day. Getting it repaired promptly will pay off. You can save more water with this first one of our energy-saving tips for the bathroom: use only as much as water as you really need. Don’t leave the tap running while you are brushing your teeth and use the toilet’s low flush button.

Energy-saving tips for the bathroom – tip #2: Avoid battery-powered devices

From hairdryers and razors to electric toothbrushes, we consume power even in the bathroom. Avoid using battery-powered devices because they use up more electricity than mains-operated appliances. If you cannot do without battery-powered devices, make sure that you charge them properly. Remove the plug after charging, allow the battery to run down completely every now and again and dispose of it properly.

Energy-saving tips for the bathroom – tip #3: Ventilate and heat correctly

It does no harm to turn up the heating in your bathroom every now and again, as a warm bathroom reduces the risk of mold and mildew. When you shower, steam is created, which then forms condensation on walls and windows. If it is too cold in your bathroom, the moisture cannot evaporate and it soaks into the plaster and wallpaper, thus creating the ideal breeding ground for mould and mildew. Make sure when you ventilate your bathroom that the doors to less heated rooms are closed – otherwise the steam from your bathroom will condense on the walls of those rooms and bring their temperature down even further. Open all the windows and doors in your bathroom and turn the heating down. During winter months it is sufficient to ventilate intensively for three to four minutes. This is more efficient than leaving a window half open all day long.

Note: As with so many of these “Ways to save” topics there is so much on the web that you should probably do your own search. There are literally 1000s of articles laying around. This is just a place to get started if you need a reminder.

:}

Go there read. More next week.

:}

Saving Energy In The Kitchen – I started in on saving energy at home and who knows where this will end up

Posted on by
Reply

To be followed by the living room, the dining room and what the bedroom? I can think of many ways to save energy there.

http://www.resnet.us/library/kitchen/

Kitchen

August 5, 2012

There are a variety of ways to improve the energy efficiency of your kitchen, starting with the way you use your appliances to home sealing and replacing your light fixtures.

Floor Vents/Radiators

  • Ensure vent connections and registers are well sealed at floors, walls and ceilings, which are all common areas for disconnected ducts and leakage.
  • Make sure all floor vents and air registers are clear of furniture, allowing air to flow freely.
  • Install heat resistant reflectors between radiators and walls to reflect heat back into the room instead of onto walls.

Range

  • Use the right sized pots with stove burners; for example, a 6? pot on an 8? burner wastes over 40% of the heat generated.
  • Cover pots and pans when cooking to keep heat in.
  • Learn more:
    • Save up to $36 annually on electric ranges or $18 on gas by simply using the right sized pots on burners.
    • Cook more efficiently and keep your kitchen cooler by covering pots and pans.
    • Keep gas range burners clean to ensure maximum efficiency.

Range Hood

  • Install ENERGY STAR certified range hoods to control moisture and remove cooking odors.
  • Learn more:
    • On average, ENERGY STAR certified ventilation fans use 60% less energy than standard models.
    • Save more than $60 in electricity costs over the life of a fan by replacing it with an ENERGY STAR certified one.
    • By using high performance motors and improved blade design, ENERGY STAR certified fans are quieter, perform better and are longer lasting than standard models.
    • Look for ENERGY STAR certified range hoods at home improvement and hardware stores, or ask for them from your HVAC or electrical contractor.

 

:}

Go there and read a blast from the past. More next week.

:}

When I Was Growing Up The Hot Things Were Compact Flourescents

Posted on by
Reply

Now the hottest things in the energy conservation world  or at least in the lighting world are LED lights. They come in all shapes and sizes. In fact I have one that I use as a flashlight, but it was intended to be a safety head light for my bicycle. It has been amazingly helpful. This is a complex subject so it will take me a few weeks to get it all posted. But here is a start.

http://en.wikipedia.org/wiki/Light-emitting_diode

Light-emitting diode

From Wikipedia, the free encyclopedia

 

A light-emitting diode (LED) is a two-lead semiconductor light source. It is a pn-junction diode, which emits light when activated.[6] When a suitable voltage is applied to the leads, electrons are able to recombine with electron holes within the device, releasing energy in the form of photons. This effect is called electroluminescence, and the color of the light (corresponding to the energy of the photon) is determined by the energy band gap of the semiconductor.

An LED is often small in area (less than 1 mm2) and integrated optical components may be used to shape its radiation pattern.[7]

Appearing as practical electronic components in 1962,[8] the earliest LEDs emitted low-intensity infrared light. Infrared LEDs are still frequently used as transmitting elements in remote-control circuits, such as those in remote controls for a wide variety of consumer electronics. The first visible-light LEDs were also of low intensity, and limited to red. Modern LEDs are available across the visible, ultraviolet, and infrared wavelengths, with very high brightness.

Early LEDs were often used as indicator lamps for electronic devices, replacing small incandescent bulbs. They were soon packaged into numeric readouts in the form of seven-segment displays, and were commonly seen in digital clocks.

Recent developments in LEDs permit them to be used in environmental and task lighting. LEDs have many advantages over incandescent light sources including lower energy consumption, longer lifetime, improved physical robustness, smaller size, and faster switching. Light-emitting diodes are now used in applications as diverse as aviation lighting, automotive headlamps, advertising, general lighting, traffic signals, and camera flashes. However, LEDs powerful enough for room lighting are still relatively expensive, and require more precise current and heat management than compact fluorescent lamp sources of comparable output.

LEDs have allowed new text, video displays, and sensors to be developed, while their high switching rates are also useful in advanced communications technology.

:}

Go there and read in an OMG sort of way. More next week.

:}

Cooking With Induction – How is that for a big veer in the opposite direction

Posted on by
Reply

I know that going from commenting on falling oil prices (and they are still dropping) to talking about a range for cooking in your kitchen will produce screeching sounds from some readers. But I felt a need to get back to this blog’s roots in the residential  housing market so I will just plunge ahead. In my real life I prefer natural gas stoves because I am good with them and not so good with electric. Still if you are like my brother Mike and trapped in an all electric house then this would be the way to go.

http://ovens.reviewed.com/features/the-future-of-induction-cooking-heats-up?utm_source=taboola&utm_medium=USAT%20Recirc

The Future of Induction Cooking Heats Up

Cooking with magnets keeps getting better, thanks to clever designs and new innovations.

 

4f413e70b541b1e6609a5741340a34df?s=48&d=https%3a%2f%2fs3.amazonaws.com%2freviewed production%2favatar

Liam F McCabe
September 07, 2013

 

The handful of induction cooktops available in the US tend to have fixed zones to fit different pots and pans. If the cookware slips out of the zone, then it won’t cook. But tons of European manufacturers, including big names like Bosch and Electrolux, showed off induction hobs with “flex” cooking areas.

 

:}

Go there and read. More next week.

:}

 

Ameren To Charge To Read Meter – That is like a paperboy charging you for their bike

Posted on by
Reply

There is such a thing as the cost of doing business.

http://wtax.com/news/101101-ameren-threatens-20-monthly-fee-for-no-smart-meters/

Ameren Threatens $20 Monthly Fee for No Smart Meters

Last Monday at 1:35 PM in Local

Ameren Illinois says customers who refuse to have an electricity meter installed will see an additional $20 monthly fee on their bills.

Ameren says the so-called smart meters, which transmit details about power usage, enable the utility to pinpoint outage problems and fix them faster. It says the meters can be read remotely and that the $20 fee covers the cost of sending out a person to read the older analog meter.

The company is set to install 780,000 of the new electricity meters in central Illinois and 468,000 upgraded gas meters, which offer similar capabilities.

The Illinois Commerce Commission, the state’s utility regulators, approved the extra charge and said the company should be compensated for meters that require a person to visit them.

:}

Go there and read. More next week.

:}