Federal Energy Tax Credits For Residential Housing – What’s in your Stimulus Package

Posted on May 27, 2009 by Doug Nicodemus

What’s up with the Feds for the new green economy?

http://www.energystar.gov/index.cfm?c=products.pr_tax_credits

Federal Tax Credits for Energy Efficiency

Frequently Asked Questions:

How has the new Stimulus bill affected the tax credits for energy efficient home improvements?

What tax credits are available in 2008 for energy efficiency home improvements?

Are installation costs covered by the tax credit?

All Tax Credit FAQs

UPDATED May 14, 2009

Quick link to this page: energystar.gov/taxcredits

Federal Tax Credits for Energy Efficiency includes:

Tax Credits for Consumers
- Tax credits are available at 30% of the cost, up to $1,500, in 2009 & 2010 (for existing homes only) for:
- Tax credits are available at 30% of the cost, with no upper limit through 2016 (for existing homes & new construction) for:
Cars
Tax Credits for Home Builders
Tax Deductions for Commercial Buildings
For More Information

**Please note, not all ENERGY STAR qualified homes and products qualify for a tax credit. These tax credits are available for a number of products at the highest efficiency levels, which typically cost much more than standard products. If, for whatever reason, you decide not to purchase a product covered by the tax credit, you may still consider purchasing an ENERGY STAR product. ENERGY STAR distinguishes energy efficient products which, although they may cost more to purchase than standard models, will pay you back in lower energy bills within a reasonable amount of time, without a tax credit.

Tax Credits for Consumers:

Home Improvements

Tax credits are now available for home improvements:

must be “placed in service” from January 1, 2009 through December 31, 2010
must be for taxpayer’s principal residence, EXCEPT for geothermal heat pumps, solar water heaters, solar panels, and small wind energy systems (where second homes and rentals qualify)
$1,500 is the maximum total amount that can be claimed for all products placed in service in 2009 & 2010 for most home improvements, EXCEPT for geothermal heat pumps, solar water heaters, solar panels, fuel cells, and small wind energy systems which are not subject to this cap, and are in effect through 2016
must have a Manufacturer Certification Statement³ to qualify
for record keeping, save your receipts and the Manufacturer Certification Statement³
improvements made in 2009 will be claimed on your 2009 taxes (filed by April 15, 2010) — use IRS Tax Form 5695 (2009 version) — it will be available late 2009 or early 2010
If you are building a new home, you can qualify for the tax credit for geothermal heat pumps, photovoltaics, solar water heaters, small wind energy systems and fuel cells, but not the tax credits for windows, doors, insulation, roofs, HVAC, or non-solar water heaters. More.

Or you can go here:

http://www.energy.gov/taxbreaks.htm

Consumer Energy Tax Incentives
What the American Recovery and Reinvestment Act Means to You

The American Recovery and Reinvestment Act of 2009 extended many consumer tax incentives originally introduced in the Energy Policy Act of 2005 (EPACT) and amended in the Emergency Economic Stabilization Act of 2008 (P.L. 110-343). Businesses, utilities, and governments are also eligible for tax credits.

See the summary of the energy tax incentives included in the Emergency Economic Stabilization Act of 2008.

About Tax Credits
A tax credit is generally more valuable than an equivalent tax deduction because a tax credit reduces tax dollar-for-dollar, while a deduction only removes a percentage of the tax that is owed. Consumers can itemize purchases on their federal income tax form, which will lower the total amount of tax they owe the government.

Fuel-efficient vehicles and energy-efficient appliances and products provide many benefits such as better gas mileage –meaning lower gasoline costs, fewer emissions, lower energy bills, increased indoor comfort, and reduced air pollution.

In addition to federal tax incentives, some consumers will also be eligible for utility or state rebates, as well as state tax incentives for energy-efficient homes, vehicles and equipment. Each state’s energy office web site may have more information on specific state tax information.

Below is a summary of many of the tax credits available to consumers. Please see the ENERGY STAR® page on Federal Tax Credits for Energy Efficiency for complete details.

Home Energy Efficiency Improvement Tax Credits
Consumers who purchase and install specific products, such as energy-efficient windows, insulation, doors, roofs, and heating and cooling equipment in existing homes can receive a tax credit for 30% of the cost, up to $1,500, for improvements “placed in service” starting January 1, 2009, through December 31, 2010. See EnergyStar.gov for a complete summary of energy efficiency tax credits available to consumers.

Residential Renewable Energy Tax Credits
Consumers who install solar energy systems (including solar water heating and solar electric systems), small wind systems, geothermal heat pumps, and residential fuel cell and microturbine systems can receive a 30% tax credit for systems placed in service before December 31, 2016; the previous tax credit cap no longer applies.

Automobile Tax Credits
Hybrid Gas-Electric and Alternative Fuel Vehicles
Individuals and businesses who buy or lease a new hybrid gas-electric car or truck are eligible for an income tax credit for vehicles “placed in service” starting January 1, 2006, and purchased on or before December 31, 2010. The amount of the credit depends on the fuel economy, the weight of the vehicle, and whether the tax credit has been or is being phased out. Hybrid vehicles that use less gasoline than the average vehicle of similar weight and that meet an emissions standard qualify for the credit.

This tax credit will be phased out for each manufacturer once that company has sold 60,000 eligible vehicles. At that point, the tax credit for each company’s vehicles will be gradually reduced over the course fifteen months. See the IRS’s Summary of the Credit for Qualified Hybrid Vehicles for information on the status of specific vehicle eligibility.

Alternative-fuel vehicles, diesel vehicles with advanced lean-burn technologies, and fuel-cell vehicles are also eligible for tax credits. See the IRS summary of credits available for Alternative Motor Vehicles.

Plug-In Electric Vehicles
Plug-in electric vehicles also qualify for a tax credit starting January 1, 2010. The credit for passenger vehicles and light trucks ranges from $2,500 to $7,500, depending on batter capacity. The first 200,000 vehicles sold by each manufacturer are eligible for the full tax credit; the credit will then phase out over a year.

Plug-In Hybrid Conversion Kits
Hybrid vehicle owners who purchase a qualified plug-in hybrid conversion kit are eligible for a 10% credit, capped at $4,000, through 2011.

* Sources: ENERGYSTAR.gov and IRS.gov
** The IRS will determine final tax credit amounts. As more information becomes available, it will be posted on our website.

I am getting tired now. So you can go here:

http://www.moneymaestros.com/federal-tax-credits-for-energy-efficiency-now-extended-in-2009/

Federal Tax Credits For Energy Efficiency Now Extended In 2009

by James K. on January 14, 2009

Good news for consumers who are energy conscious and using energy efficient appliances. Last October, Federal tax credits for energy efficient home improvements have been extended into 2009.

The recently-signed “Emergency Economic Stabilization Act of 2008? includes an extension of the residential tax credits for energy efficient improvements. The previous tax credits expired at the end of 2007.

It’s important to note that the new tax credits for installing energy efficient improvements are only good for 2009 installations. There are no tax credits for improvements installed during 2008.

The tax credits are available for insulation, replacement windows, water heaters, and certain high efficiency heating and cooling equipment. However, be aware that not all Energy Star rated improvements are eligible for the tax credit. Be sure to check EnergyStar.gov for rules and more details.

Here are some examples of the federal tax credits that are available to homeowners:

– Windows: 10% of cost, up to $200, for qualified ENERGY STAR windows, skylights and storm windows
– Doors (exterior): 10% of cost, up to $500, for qualifying doors (most ENERGY STAR doors will qualify)
– Roofs (metal): 10% of cost, up to $500, for qualifying ENERGY STAR metal roofs
– Insulation: 10% of cost, up to $500, for qualifying insulation (not vapor retarders or siding)
– Air Conditioning (split or package systems): $300 for qualifying systems, not all ENERGY STAR systems qualify
– Water Heaters (tankless only): $300 for qualifying systems
– Cars: Credits are available for certain cars, and is limited by 60,000 per manufacturer before a phase-out period begins
– Solar Water Heating: 30% of cost, up to $2,000, not available for water heaters used for pools or spas
– Solar Power (Photovoltaic): 30% of cost, up to $2,000, must provide electricity for the home
– Fuel Cells: 30% of cost, up to $1,000 per kW of power that can be produced

Tomorrow – Paint your roof white

Bataan Nuclear Power Plant And Earthquakes – Shake, Rattle and Roll

Posted on May 22, 2009 by Doug Nicodemus

(it’s jam band friday – http://www.youtube.com/watch?v=20Feq_Nt3nM )

This maybe the longest list of Qualifiers I have ever published and I have to start by eating crow to boot. I made a missssstaaake yesterday. The piece that I was quoting yesterday was actually a piece on seismic activity, but I thought what it said was more applicable to Volcanic eruptions. I said that the Natib Caldera had erupted 3,000 years ago, but the actual article said that a major fault shift had occurred every 2,000 years. The last major fault shift was 3,000 years ago so a major Earth Quake was overdue. The caldera last blew 14 to 18,000 years ago and not enough is known about its activity to say what its periocity is. Whew, I feel so much better…A major earthquake in the area is overdue.

( I know that Shake Rattle and Roll isn’t really a jam song but what the heck it’s Friday)

As was noted in one of the comments in the seismic piece, the Philippines is not alone in either being on the Ring Of Fire nor is it the only Earth Quake prone zone in the world. Japan and America are both very sophisticated places technologically and also have extensive infrastructures to handle disasters in general. The Philippines is neither. Plus where are you going to evacuate too? It is an island. Not only that but the Japanese and the Americans have released a lot of radiation over the years. Look the big deal is Bataan is not fueled. Once it is fueld you might as well run it because everything is radioactive anyway. Drago in the US is just as much a threat. I bitched about it for years while it was being built and submitted written protest to the Nuclear Regulatory Agency in DC when it was Licensed.

( http://www.youtube.com/watch?v=MpT8Sd9wRlQ&feature=related )

So having said all that, the Philippines really shakes:

http://earthquake.usgs.gov/eqcenter/

http://maps.google.com/maps?f=q&hl=en&q=7.8686,126.8434(M5.7+-+Mindanao,+Philippines+-+2009+May+21+05%3A53%3A59+UTC)&t=h&z=7

Everyday. Why because the Philippines sits on the edge of a Techtonic Plate. So really BIG things can happen:

( Elvis shake those hips http://www.youtube.com/watch?v=dCBT7PfAEgc&feature=related )

http://www.drj.com/drworld/content/w1_116.htm

Earthquake Devastates Philippines

By Cathy Clark and Jim Taylor

On July 16, 1990 at 4:26 p.m. local time, a severe earthquake registering 7.7 on the Richter scale struck the northern Philippines. The earthquake caused damage over a region of about 7700 square miles, extending northwest from Manila through the densely populated Central Plains of Luzon and into the mountains of the Cordillera Central.
Over 5,000 people were reported dead or injured, and in excess of 2300 infrastructures were either destroyed or seriously damaged. While the quake was devastating, it was not an unusual occurrence in the Philippines; since 1950 alone there have been six major earthquakes at various locations in the archipelago, having magnitudes ranging from 7.3 to 8.3.

STRUCTURAL DAMAGE

Buildings were decimated by ground shaking, soil failure and liquefication (causing them to settle into the ground), and landslides.
Nearly all multistory buildings in the Philippines are constructed of reinforced concrete frames, supporting slab floors. Short-column failure was evident in many buildings observed to have the classic diagonal cracking where the column was acting as a short shear wall and could not carry the loads. Many unreinforced masonry infilled walls separated from the concrete frames and collapsed.
In the heavily shaken regions, two general types of disastrous failure to multistory, larger reinforced concrete buildings were observed–failed first stories and total building collapse.

First-story (or Soft-story) Failures

The ground floor of a building is frequently the weakest part of the structure. It is seldom enclosed on all four sides by walls capable of resisting shear forces, and it is also generally taller than upper floors. Ground floor shops, stores, lobbies, or garages normally allot most of their front wall area to doors or plate glass, leaving one side of the building with no shear resistance. Bending and shear forces induced by strong ground shaking are therefore concentrated in the ground-floor columns. As a result, the building may fail by collapse of only its first story, with the stronger upper section of the building remaining intact.

Multistory Failures

Many multistory building failures or “pancake” collapses (typically with structures of six to ten stories) were observed in the city of Baguio. One such collapse included a nine-story hotel which killed over a dozen occupants on the ground floor. This type of damage has been observed repeatedly in numerous earthquakes throughout the world where design and construction deficiencies exist.

( http://www.youtube.com/watch?v=m_SOmE5tfNo&feature=related )

Not only that but it appears to happen about once every 20 years or so:

http://www.absoluteastronomy.com/topics/1968_Casiguran_earthquake

The 1968 Casiguran earthquake occurred on August 2, 1968 at a magnitude of 7.3 on the Richter scale. The earthquake’s epicenter was located in Casiguran
Casiguran is a 3rd class Philippine municipality in the northern part of the Philippine province of Aurora province, Philippines. It is located 121 km from Baler, Aurora, the provincial capital…. Quezon

Quezon is a Provinces of the Philippines of the Philippines located in the CALABARZON Regions of the Philippines in Luzon. The province was named after Manuel L….(now part of Aurora province).The city of Manila, or simply ‘Manila’, is the Capital of the Philippines and one of the 17 cities and municipalities that make up Metro Manila…. was the hardest hit with 268 people were killed and 261 more were injured. Many structures that suffered severe damage were built near the mouth of the Pasig River

The Pasig River is a river in the Philippines and connects Laguna de Bay into Manila Bay. It stretches for and divides Metro Manila into two….on huge alluvial deposits. A number of buildings were damaged beyond repair while others only suffered cosmetic damage. Two hundred and sixty people died during the collapse of the 6-story Ruby Tower, located in the district of Binondo. The entire building, save for a portion of the first and second floors at its northern end, was destroyed. Allegations of poor design and construction, as well as use of low-quality building materials, arose. In the District of Santa Ana is a district of the City of Manila in the Philippines, located at the southeast banks of the Pasig River, bounded on the northeast by Mandaluyong City, Makati City to the east, southwest is the Manila district of Paco, Manila, and to the west, Pandacan, Manila…. one person was injured by debris from a damaged apartment building.
Two more people from Aurora sub province and Pampanga is a Provinces of the Philippines of the Philippines located in the Central Luzon Regions of the Philippines. Its capital is the City of San Fernando, Pampanga….
died as a direct result of the quake. Around the town of Casiguran, there were several reports of landslides, the most destructive one at Casiguran Bay.

( http://www.youtube.com/watch?v=t61oJT-d900&feature=related )

So let’s put our thinking caps on here. The Luzon Earth Quake happened in 1990 and Pinatubo happened in 1991. What if the Luzon earthquake had hit Manila like the Casiguran. I don’t think I would have wanted to have had to worry about a Nuclear Reactor popping off. Guess what it has been about 20 years…

Bataan Death March Repeated – How desperate is the Nuclear Power Industry to be reborn

Posted on May 20, 2009 by Doug Nicodemus

There is a movement afoot in the Philippines to actually fuel a long abandoned Nuclear power plant. It was built but never fueled because nuclear power makes no economic sense. The fuel is too expensive, and creating the fuel is so lethal as to be largely unthinkable. But in this particular case…much like the nukes in California built on earthquake fault zones…the Philippines in general is sooooo close to the water table as to invite the China Syndrome. For those that relate that to a mildly entertaining and scary movie

http://www.imdb.com/title/tt0078966/

http://www.youtube.com/watch?v=5FxtBJ59Jm8

http://www.youtube.com/watch?v=pnDBXGb6Nn8

The reality of the China Syndrome was suppressed at Three Mile Island where at least a 1,000 people died and 1,000s more were sickened in a 5 state region in New England:

http://www.youtube.com/watch?v=Fmmdh8Xlbvg&feature=related

It was never confronted at Chernobyl where 10s of 1,000s died and 100s of 1000s of people were sickened worldwide:

http://www.youtube.com/watch?v=101OEaksU0s&feature=related

Where unbelievably 3 Nuclear Reactors still operate today…next to a Lake..

So why intheworld would you want to fuel a reactor built in 1976 on an island near the sea in a tropical jungle? Because it cost 2.6 billion $$$ to build (thanks Ferdinand Marco…where do you think his wife got those shoes) and which is still costing the people of the Philippines 155,000 $$$ a day. As the song says, Money Money Money:

http://www.youtube.com/watch?v=WCkOmcIl79s

http://www.youtube.com/watch?v=9O8gTib5rnw

But let’s start at the beginning, I was 22 in 1976 and working at Powerton, a Com Ed coal fired powerplant in Pekin, IL.

http://en.wikipedia.org/wiki/Bataan_Nuclear_Power_Plant

Bataan Nuclear Power Plant

From Wikipedia, the free encyclopedia

Jump to: navigation, search

Bataan Nuclear Power Plant is a nuclear power plant, completed but never fueled, on Bataan Peninsula, 100 kilometers (60 miles) west of Manila in the Philippines. It is located on a 3.57 square kilometer government reservation at Napot Point in Morong, Bataan. It was the Philippines’ only attempt at building a nuclear power plant.

[edit] History

The Philippine nuclear program started in 1958 with the creation of the Philippine Atomic Energy Commission (PAEC) under Republic Act 2067.^[1]

Under a regime of martial law, Philippine President Ferdinand Marcos in July 1973 announced the decision to build a nuclear power plant.^[1] This was in response to the 1973 oil crisis, as the Middle East oil embargo had put a heavy strain on the Philippine economy, and Marcos believed nuclear power to be the solution to meeting the country’s energy demands and decreasing dependence on imported oil.^[2]

Construction on the Bataan Nuclear Power Plant began in 1976. Following the 1979 Three Mile Island accident in the United States, construction on the BNPP was stopped, and a subsequent safety inquiry into the plant revealed over 4,000 defects.^[1] Among the issues raised was that it was built near major earthquake fault lines and close to the then dormant Pinatubo volcano.^[2]

By 1984, when the BNPP was nearly complete, its cost had reached $2.3 billion.^[2] A Westinghouse light water reactor, it was designed to produce 621 megawatts of electricity.^[2]

Marcos was overthrown by the People Power Revolution in 1986. Days after the April 1986 Chernobyl disaster, the succeeding administration of President Corazon Aquino decided not to operate the plant.^[1]^[3] Among other considerations taken were the strong opposition from Bataan residents and Philippine citizens.^[1]^[3]

The government sued Westinghouse for overpricing and bribery but was ultimately rejected by a United States court.^[4]

Debt repayment on the plant became the country’s biggest single obligation, and while successive governments have looked at several proposals to convert the plant into an oil, coal, or gas-fired power station, but all have been deemed less economically attractive in the long term than the construction of new power stations.^[2]

Despite never having been commissioned, the plant has remained intact, including the nuclear reactor, and has continued to be maintained.^[2] The Philippine government completed paying off its obligations on the plant in April 2007, more than 30 years after construction began.^[2]

On January 29, 2008, Energy Secretary Angelo Reyes announced that International Atomic Energy Agency (IAEA) 8-man team led by Akira Omoto inspected the mothballed Bataan Nuclear power station on rehabilitation prospects. In preparing their report, the IAEA made two primary recommendations. First, the power plant’s status must be thoroughly evaluated by technical inspections and economic evaluations conducted by a committed group of nuclear power experts with experience in preservation management. Second, the IAEA mission advised the Philippines Government on the general requirements for starting its nuclear power programme, stressing that the proper infrastructure, safety standards, and knowledge be implemented.^[5] The IAEA’s role did not extend to assessing whether the power plant is usable or not, or how much the plant may cost to rehabilitate.
:}

What a bad idea.

Windows That Generate Electricity – Integrated Photovoltaics and your house

Posted on May 14, 2009 by Doug Nicodemus

I said yesterday, how would your world change if everything on the outside of your house generated electricity? I skipped windows because they are a topic in and of themselves.

http://www.buildingsolar.com/design.asp#anchor138832Vision Glass

Photovoltaic (PV) vision glass substitutes a thin-film, semi-transparent photovoltaic panel for the exterior glass panel in an otherwise traditional double-pane glass window or skylight. Electric wires extend from the sides of each glass unit and are connected to wires from other windows, building up the entire system. The technology, while available in Europe, is currently being developed as part of a United States Department of Energy PV-BONUS project.

On the University of Wisconsin-Green Bay campus, the system, rated at about 11 kW, substitutes Building Integrated Photovoltaic vision glass for traditional windows in the Wintergarden of Mary Ann Cofrin Hall.

This system spans 2,000 square feet and generates about 12,500 kWh annually. The “PV Glass” unit was manufactured by Viracon, Inc. using BP Solar MST-43LV 43-watt, thin-film photovoltaic modules and was installed in a standard Kawneer Company 1600 PowerWall (TM). In this application, BP Solar laser-etched their photovoltaic modules to create a desired transmittance for the Wintergarden.

Artist’s rendering of Wintergarden.

A total of 252 modules were installed. Each vision glass surface has 13 layers of thin film, altogether thinner than one piece of paper, sandwiched between two protective layers of glass.

What if it was a SMART Window? One that opened when the house got too cold or too hot?

http://www.sciencedirect.com/science?_ob=ArticleURL&_udi=B6V2V-4MH8BDR-1&_user=10&_rdoc=1&_fmt=&_orig=search&_sort=d&view=c&_acct=C000050221&_version=1&_urlVersion=0&_userid=10&md5=4b8850a2c79f9f29640dca3f42ce3fde

Performance evaluation of a PV ventilated window applying to office building of Hong Kong

T.T. Chow ^,^a^,, K.F. Fong^a, W. He^a, Z. Lin^a and A.L.S. Chan^a

Received 29 June 2006;

revised 23 September 2006;

accepted 26 September 2006.

Available online 6 December 2006.

Abstract

PV ventilated glazing technology for application in warm climate provides energy saving opportunities through the reduction in air-conditioning load, the daylight utilization, and the green electric power generation. In a working environment, the use of semi-transparent a-Si glazing is deemed better than the one with non-transparent c-Si solar cells. This paper reports an evaluation of its integrated performance using a small office room in Hong Kong as an example. An energy model of a PV ventilated window system is first introduced. Based on this together with the TMY weather data of Hong Kong and the daylight simulation capability of the EnergyPlus program, the overall performance analysis have been executed for different window orientations. It was found that a solar cell transmittance in the range of 0.45–0.55 could achieve the best electricity saving.

It’s getting to be big business:

http://www.optoiq.com/articles/display/361842/s-articles/s-laser-focus-world/s-industry-news/s-konarka-partners-with-window-company-on-bipv-integrating-photovoltaics-with-glass.html

Konarka partners with window company on BIPV; integrating photovoltaics with glass

May 12, 2009–Konarka Technologies (Lowell, MA), a developer of Konarka Power Plastic, a material that converts light to energy, entered into an advanced product development agreement with Florida-based Arch Aluminum & Glass Co. Together, they plan to collaborate on building integrated photovoltaics (BIPV), with a memorandum of understanding to integrate Konarka’s patent-protected thin-film solar material into glass for various commercial BIPV applications (see “ Thin-film and organic photovoltaic manufacturing to reach 29 GWp” and “THIN-FILM PHOTOVOLTAICS: The key to success is higher efficiency“).

“Konarka is making great strides with our aggressive plans to expand into various markets, including building and construction,” said Rick Hess, president and CEO at Konarka. “Because our solar material is flexible, lightweight and semi-transparent, it integrates easier and is more aesthetically appealing than other solar products, making it ideally suited for BIPV applications. We expect that our collaborative work with Arch Aluminum & Glass will advance the delivery of Konarka Power Plastic on a large scale basis into this market segment.”

Arch Aluminum specializes in a wide range of artistic and architectural glass products to keep pace with the demands of today’s architects, designers and building developers. The company offers in-house laminating, heat-treating and fabrication technology as well as selective, engineered, off-the-shelf aluminum and glass products.

“Until today, aesthetic and performance concerns limited the ability of architects to use BIPV technology in their designs,” said Arch CEO Leon Silverstein. “This product development investigation is about the creation of a new product category, one that had been unavailable until today. It is energy-efficient and transparent with superior vertical performance and a subtle red, blue or green aesthetic. With these features, BIPV will no longer need to be confined to spandrel or overhead applications. An entire building can be put to use, producing its own power, and looking good doing so.”

In October 2008, Konarka opened the largest roll-to-roll flexible thin film solar manufacturing facility in the world, preparing for the commercialization and mass production of its solar material for various market segments including sensors, consumer products, tent and fabric structures, greenhouses, marine and boating, building construction, as well as fashion and accessories, among others.

This would be Barack Obama’s GREEN Economy or as I like to say Greenomy.

Flexible Solar Photovoltaics – They could change your view of electrical power forever

Posted on May 13, 2009 by Doug Nicodemus

What would the world look like if every surface of your house generated electricity. This is a very practical issue. During the illegal rate hikes of 2007 my brother Mike who owns an all electric house figured that for him to got off the grid it would take a 10 kilowatt system. At the time using only solid solar panels he figured there was not enough space on his roof to put the power generation there. But what if every surface of his house except the windows generated power. I am sure that he has enough sun facing surfaces to generate that much power. (more on the windows later. and yes I did recommend a personal windmill but…)

First there is the flex version of a stand panel which is light enough to hang on exterior walls:

http://store.altestore.com/Solar-Panels/Flexible-Rollable-Solar-Panels/c679/

Flexible Solar Panels, Flexible Portable Solar Panels, Solar Energy Panels from

Flexible solar panels are the perfect low wattage, environmentally friendly and space efficient energy solution. If you have an appliance or gadget that requires between 5 and 20 watts of power, these versatile flexible portable solar panels will be just the right fit. Just use these solar energy panels to charge up the battery you want to use to run your basic necessities. You can roll them up to move them or store them or install them semi-permanently. These are a great solution for camping or marine excursions where you may not have sufficient room for a traditional solar panel. These flexible solar panels come in multiple sizes and can offer multiple wattage power and they all weigh less than 2 pounds.

It can even bend around corners:

http://www.siliconsolar.com/flexible-solar-panels.html

Flexible Solar Panels: The lightest thin film flexible solar panels on today’s market are available from Silicon Solar.

Solar technology has reached its most convenient, lightweight form: the newly-engineered flexible solar panel. Silicon Solar is the proud carrier of over 50 modules of flexible solar panels, offered in a variety of sizes.

Through recent developments, Silicon Solar has provided ways of listing thin, light weight, flexible solar panels allowing for multiple applications to now be solar accessible that never were before.

Thin Film solar cells and panels now allow for several types of application to be introduced into the market including solar backpacks, solar thin film clothing and athletic apparel. We at Silicon Solar have taken these methods to the extreme and receive requests from customers who give us incentive and constructive feedback on developing new ways of utilizing this technology not only for them, but for you as well. Each flexible solar panel can be rolled up to 2 inches in diameter, making the paper thin solar cell one of the most durable and long lasting solar modules on the market.

What about a tent that generates all the electricity you need on a camping trip? I can’t show you much of the website because it is too heavey into video but:

http://www.powerfilmsolar.com/

What’s New

Earth Care Products Using PowerFilm Technology
A stick-on solar panel to use to charge golf cart batteries while out on the course is voted the year’s best new product by the PGA.
http://www.solarenergygolfcarts.com/

PowerFilm’s USB + AA Solar Charger took second place in the Mobile CE – Fashion & Lifestyle Products competition at CTIA Wireless 2009.

Nearly 300 products were submitted for consideration for the various catagories and PowerFilm was among the few to be recognized.

Temporarily Unavailable
The RA-5 Accessory (12-Volt Deluxe Universal Battery Charger/Analyzer/Conditioner) is temporarily out of stock. Sorry for any inconvenience. Please check back soon!

Finally what if your drapes in your windows or the couch in the bay window could be generators? Now imagine everyhouse in the United States outfitted this way.

http://www.sciencedaily.com/releases/2008/06/080617114723.htm

Getting Wrapped Up In Solar Textiles

ScienceDaily (June 21, 2008) — Sheila Kennedy, an expert in the integration of solar cell technology in architecture who is now at MIT, creates designs for flexible photovoltaic materials that may change the way buildings receive and distribute energy.

These new materials, known as solar textiles, work like the now-familiar photovoltaic cells in solar panels. Made of semiconductor materials, they absorb sunlight and convert it into electricity.

Kennedy uses 3-D modeling software to design with solar textiles, generating membrane-like surfaces that can become energy-efficient cladding for roofs or walls. Solar textiles may also be draped like curtains.

“Surfaces that define space can also be producers of energy,” says Kennedy, a visiting lecturer in architecture. “The boundaries between traditional walls and utilities are shifting.”

Principal architect in the Boston firm, Kennedy & Violich Architecture, Ltd., and design director of its materials research group, KVA Matx, Kennedy came to MIT this year. She was inspired, she says, by President Susan Hockfield’s plan to make MIT the “energy university” and by MIT’s interdisciplinary energy curriculum that integrates research and practice.

http://web.mit.edu/newsoffice/2008/solar-textiles-0609.html

MIT lecturer focuses on flexible photovoltaic materials

Sarah H. Wright, News Office
June 9, 2008

This spring, Kennedy taught a new MIT architecture course, Soft Space: Sustainable Strategies for Textile Construction. She challenged the students to design architectural proposals for a new fast train station and public market in Porto, Portugal.

For Mary Hale, graduate student in architecture, Kennedy’s Soft Space course was an inspiration to pursue photovoltaic technology in her master’s thesis.

“I have always been interested in photovoltaics, but before this studio, I am not sure that I would have felt empowered to integrate them into a personal, self-propelled, project,” she says.

Kennedy, for her part, will pursue her research in pushing the envelope of energy-efficiency and architecture. A recent project, “Soft House,” exhibited at the Vitra Design Museum in Essen, Germany, illustrates what Kennedy means when she says the boundaries between walls and utilities are changing.

For Soft House, Kennedy transformed household curtains into mobile, flexible energy-harvesting surfaces with integrated solid-state lighting. Soft House curtains move to follow the sun and can generate up to 16,000 watt-hours of electricity–more than half the daily power needs of an average American household.

Dan Piraro, Jason Love And Matthew Difee Go Live – What do 3 pretty funny guys have to do with energy

Posted on May 12, 2009 by Doug Nicodemus

Or even the environment or residential energy conservation? Well Actually nothing but Dan lets me post a cartoon of his periodically here when I am completely out of ideas or when he is particularly brilliant which ever comes first. So when he asked his blog readers to reach out to media moguls and poobas to see if they might air a version of it like on Showtime or HBO I could not resist but first the toon:

http://bizarrocomic.blogspot.com/

Now the Pitch:

COMEDY SHOW!!!

(Click the image for largerer viewage.)

A RARE COMEDY EVENT COMING TO YOUR TOWN!!!
(If your town is New York City.)

I’m doing one of my increasingly rare comedy shows in NYC for an ENTIRE WEEK next month and I can’t bear the thought of going on unless you’re going to be there. Please don’t break my already fragile heart by saying, “I can’t afford to fly all the way to New York From Seattle,” or “I wish I could be there but I’m in prison until 2019.” What is more important to you? Your precious money or my flimsy ego? (Before you answer that, consider that I will give you an autograph when you come to the show, which you can then sell on eBay to offset $3-$4 of your airfare and hotel costs.)

Seriously, this is a big show for me. I do a talk or a short set now and then, most often on the West Coast, but I’m doing fewer of these long-form comedy shows all the time and this is a full week of performances off-Broadway in NYC, so there are a lot of seats to fill. Please come. If you can’t come, send someone you know in NYC to the show and tell them to tell me you said “hi.”

After the show, you’ll be able to meet me, Jason, and Matthew as we hang out in the lobby selling books, signing breasts, and pooping out witty ripostes like a member of the Algonquin Round Table. If you’re lucky, you might even meet CHNW!

Ticket info here. Hope to see you there!

So if you are the Chief Executive Officer of a cable channel like say:

Matt Blank

at Showtime

Bill Nelson

at HBO

Doug Herzog

at Comedy Central

or even

John Odoner

at JTV

Give these poor guys a break and send someone to their show. Thanks again Dan!
:}

Wind Power 2009 In Chicago – It is the last day and I thought I would at least put up something

Posted on May 7, 2009 by Doug Nicodemus

I checked the Tribune – nothing. I checked the Sun Times – nothing. I googled and got several up and coming Wind Power Conventions/Conferences – nothing:

Wind Power Asia

http://www.windpowerasia.com/

Wind Power Transmission

http://www.windpowertd-events.com/

Small Wind Conference

http://www.the-mrea.org/smallwind.php

This one that happened in Chicago in MARCH:

http://www.platts.com/Events/2009/pc908/

The Oil Drum won’t load up:

http://www.theoildrum.com/

Connection Interrupted
The connection to the server was reset while the page was loading.
The network link was interrupted while negotiating a connection. Please try again.

Fucking geniuses

In desperation I started reading Peak OIL. By God they came through:

http://www.peakoil.com/

Thankyou Coyote

http://www.peakoil.com/modules.php?name=News&file=article&sid=48183

Reuters too of course:

http://www.reuters.com/article/GCA-GreenBusiness/idUSTRE5457XA20090506

Some Americans clamor to try wind power at home

Wed May 6, 2009 6:30pm EDTBy Andrew Stern

CHICAGO (Reuters) – The idea of wind turbines churning out free electricity alongside every home and office building has appeal, judging by the throngs around “community wind” purveyors at a Chicago wind power convention this week.

Darrin Russell of Southwest Windpower was inundated with questions during the Windpower 2009 convention where he explained the economics of the company’s workhorse 2.4 kilowatt Skystream turbine, which plugs into the local electrical grid.

“It’s nice watching the (electricity) meter go backward. Sometimes it gets going pretty fast when the wind blows hard” which it does often at the company’s headquarters in Flagstaff, Arizona, he said.

Russell paid practically nothing for his own turbine, which costs roughly $14,000 to buy and install, thanks to a newly enacted 30 percent federal tax credit for wind projects large and small, state tax credits and rebates of up to $9,000 from many utilities eager to promote renewable energy. The first month his electricity bill was zero.

The company sells to business, homeowners and developers.

“Some companies like to line them up outside instead of flags” to promote their green credentials, he said. “Helps keep their offices cool at least.”

Retailers can draw in environmentally conscious customers if they have a wind turbine outside, experts say.

Potential buyers from Chile, South Korea and the state of Michigan flocked around Southwest Windpower’s olive-green machine with three distinctively curved blades, designed to cut noise. Russell said the company has sold 5,000 small turbines in the past two years, and 150,000 in total.

Central Illinois Where The Energy Past Confronts The Future – Which will win?

Posted on April 30, 2009 by Doug Nicodemus

While Scooters and Wind Turbines may be the future the past always tries to claw its way back into the picture. In the past week we have had news about ADM’s efforts to inject poison into Mother Earth, a letter to the SJR indicating that a Carbon Tax would create the End Of Civilization As We Know It, and a team of Lobbyists here in Springfield and Chicago drumming up support for the extension of a pipeline from Peoria to the Wood River Refinery to complete the Rape Of Northern Canada…

Thank God no one suggested a New Nuclear Powerplant or I would have run out of space on this blog.

First ADM:

http://www.jg-tc.com/articles/2008/01/04/news/doc477daa5c2edd0528350999.txt

Friday, January 4, 2008 12:22 AM CST
Sequestration project in works at ADM; effort is similar to that planned for FutureGen

By CHRIS LUSVARDI, Staff Writer
clusvardi@herald-review.com

DECATUR — A project to test carbon dioxide storage capacity deep below Archer Daniels Midland Co.’s campus is scheduled to begin this spring.

The company will announce today a partnership with the Midwest Geological Sequestration Consortium, which is led by the Champaign-based Illinois State Geological Survey, to work on the $84.3-million project.

It will be one of seven projects the U.S. Department of Energy is funding to demonstrate carbon dioxide, or CO2, storage capacity in underground formations throughout the country. Researchers are looking for uses of carbon dioxide other than emitting it into the atmosphere.

“The whole idea is to understand what is going on in any given area to figure out whether this technique can be safe and effective,” said Robert Finley, director of the Illinois State Geological Survey. “Ultimately this is a technique that we are looking at very carefully to understand what the volume of the CO2 is that might actually be placed in the subsurface.”

The consortium will receive $66.7 million to test a part of the Mount Simon Sandstone, a saline-water-bearing rock formation that has increased in notoriety recently because the FutureGen plant in Mattoon also will test it. The formation runs below most of Illinois, Kentucky and Indiana and part of Ohio.

Beginning in late April, workers will drill more than 6,500 feet below the surface to the rock layer where the carbon dioxide will be stored. The drilling is expected to take about two months to complete, Finley said.

The energy department has awarded $4.2 million in funding for the drilling, Finley said. Another $5.24 million to cover the first year of the project is expected to be awarded within weeks, he said.

The project will inject 1,000 tons per day of carbon dioxide from ADM’s ethanol plant into the ground, Finley said. The layer where it will be injected is about 1,000 feet thick in the Decatur area, Finley said.

Injecting is scheduled to start in October 2009 and be completed in 2012. For two years after that, officials will monitor, take samples and make sure nothing is leaking from the formation.

OK let us see – How can something be CERTAIN and yet Experimental? No one will answer that question. The Illinois EPA which is being investigated by the Federal EPA for Collusion with Polluters gave them a permit in a heartbeat..:

http://myecoproject.org/global-warming-news/sequester-co2-first-us-large-scale-co2-storage-project-advances/

Sequester CO2: First U.S. Large-Scale CO2

Storage Project Advances

April 11, 2009 by Administrator
Filed under Global Warming News

Gob Knob Was SO CoooooooL – It was amazing to just walk right up to a 300 ft. Turbine and go inside

Posted on April 29, 2009 by Doug Nicodemus

Many things to report about the trip. First I thought the Turbine was in Sangamon County. All the press always called the location as “south of Auburn”. Well yah but it is not even in Sangamon County. It is WAY south of Auburn like 3 exits. So I am driving down I 55 looking for this 360 ft. tower and not finding it. I almost turned back. This is no big deal but since it is all the way down at the Morrisonville exit in Montgomery County some journalist could have said so. I mean it is no big deal but geez:

http://www.sj-r.com/archive/x497776679/-Gob-nob-wind-turbine-to-begin-spinning

Gob knob’ wind turbine to begin spinning

Photos

T.J. Salsman/The State Journal-Register Work on the wind turbine 30 miles south of Springfield has gone fairly quickly for the past few weeks.

Related Links

Wind power by state (01/04/09)
Macoupin County considers wind turbines to diversify economic base (01/04/09)
Economic crisis slows wind-power boom (01/04/09)

By TIM LANDIS (tim.landis@sj-r.com)

THE STATE JOURNAL-REGISTER

Posted Jan 04, 2009 @ 12:13 AM

FARMERSVILLE — Dave White was reminded during construction why a hilltop just off Interstate 55 south of Springfield was selected as the site for a wind turbine that is expected to begin churning out electricity this week.

“One of the drawbacks (to completing the erection of the turbine) was that we couldn’t get the wind to stop blowing,” said White, one of 300 customers of the Rural Electric Convenience Cooperative of Auburn about to keep the lights on with the aid of wind-blown power.

The co-op has approximately 5,500 members in Montgomery, Sangamon, Morgan, Macoupin and Christian counties.

It has been more than two years since plans were announced for the “gob knob” wind turbine, named after the pile of “gob,” or coal waste, from a Freeman United Mine that operated at the site from 1951 to 1971.

The area 30 miles south of Springfield is part of the Freeman Mine State Wildlife Habitat Area and remains a popular seasonal hunting spot.

Equipment backlogs — the turbine was shipped from the Netherlands, and the blades from Mexico — repeatedly postponed the $1.8 million project after a ceremonial groundbreaking in the fall of 2006.

The difficulty in obtaining equipment in competition with major wind farms also resulted in downsizing of the original plans for a turbine that would have supplied up to 500 homes.

So when we finally found it, it was awesome…I know I am not much of an adjectives kind guy but the thing is best viewed from about a mile away. The closer you get the more you crank your neck and you lose all sense of detail. Not only that but the wind was a howling 40 miles an hour. Blade rotation 25 rpms.? Still it was only producing 75,0000 kilowatts out of the 90,000 it could produce:

http://www.recc.coop/

Open House April 25 !

“Gob Nob” Wind Turbine ProjectThe Gob Nob project is a unique partnership between RECC and the Illinois Department of Natural Resources, which owns the land near Farmersville where the 900-kilowatt wind turbine is located.

Central Illinois is not blessed with the “prime” wind speed sites that can be found in the Peoria, Bloomington and Quincy areas. However, there are some specific locations in our area that can provide moderate wind resources. The Gob Nob site is one of those, where a 60-foot pile of coal tailings covers about 14 acres at the former Crown I coal mine . This extra height gives us access to the higher wind speeds needed to generate electricity almost every hour of the year.

The DNR has made this site available to our cooperative to enable us to generate clean, renewable energy for use by our members. All electricity produced by the turbine is fed through our Farmersville substation to power up to 370 homes and farms in the surrouding countryside.

Drivers on Interstate 55 south of Springfield can see the 900-kw turbine for miles from Exit 72, where they can stop for a closer look and visit the information kiosk to be installed at the base of the hill.

The turbine tower was constructed in late December of 2008, and commercial start-up was completed in early March of 2009. To see photos of the construction process, click here.

It was also really quiet. I need to go back sometime when it is a little less windy. I did not hear the “swoop swoop” noise that residents complain about…nor did I notice any “flicker” effect that all NIMBY’s report. That is not to say that they don’t exist. This machine this visit I did not witness it. Quite the opposite – they stopped it while we were inline to see the innards and I never noticed it. One minute it was going real fast the next it was stopped. They have been having bearing problems. The one big bearing that it sits on has been overheating and it has to be stopped to cool down. The manufacturer says that it will seat itself in a couple of months.

http://windforillinois.blogspot.com/

Sunday, April 19, 2009

Gov. Pat Quinn to Attend Wind Turbine Dedication Monday

FARMERSVILLE — More than two years after then-Lt. Gov. Quinn attended a ceremonial groundbreaking for the “Gob Knob” Wind Turbing east of Farmersville, now-Gov. Quinn will return to the site Monday to dedicate the unit.The turbine, just off Interstate 55 about 30 miles south of Springfield, began generating power last month for the Rural Electric Convenience Cooperative at Auburn. The project was delayed by the difficulty of purchasing the tower and turbine as worldwide demand has increased for wind-generated energy.

“Gob knob” is taken from the turbine’s location atop a hill created by coal waste at the reclaimed mine site. A public open house is scheduled for 11 a.m. to 4 p.m. next Saturday.

Read the full story here…

I never thought I would get a chance to steal from friend Will Reynolds, but here yah go. The final thing I will say for now was that the turnout was overwhelming. I pay attention to things like publicity profile, and expected numbers at events. The coop only has 5000 members or so. When we got to the tent that RECC had set up, there were dozens of people in and around the tent…3 full vans headed up the hill and probably 50-60 people inline up at the turbine. When I signed the book it was full and the staff had people writing their names on the blank BACKS of the pages. This attendence was generated from a little notice in the SJ-R and an even smaller notice in the Illinois Times. The attendance was totally off the chart. When I got out of the van at the top of the hill I said, “how does it feel to be on the wave of the future”. The Driver said, “pretty good actually”. I think I will leave it at that.

http://www.thereisaway.us/2009/04/closed_coal_mine_sprouts_wind.html

Closed coal mine sprouts wind turbine

I made a random stop during a road trip when I saw the new wind turbine off I-55 near Farmersville Illinois. I had heard about it being built but this was my first time seeing it. The ribbon cutting was April 20, just a few days after I went by.

I took a few pictures. They’re all pretty large if you click on them.

The turbine is at the site of a closed coal mine. The Hillsboro paper tells us:
The 230-foot turbine sits on top of a 60-foot gob pile at the former Freeman Crown 1 Coal Mine, which closed in 1971.
The site was covered with a layer of clay soil in 1991 and planted with a mix of grasses for wildlife cover, and donated to the Illinois Department of Natural Resources in 1995.

Oh I hear the grassland bird hunting is pretty good too.

If We Stop The Big Spewers We Can Keep The Little Ones – Green lawn mowers

Posted on April 17, 2009 by Doug Nicodemus

I have always said that if we stopped the polluters with the 10 to 20 story smoke stacks (look around, you know who you are). And we stopped airplanes from polluting then we would not have to worry about lawn mowers, barbecues and hotdog roasts. But still – can’t they see what they are doing to me?

http://www.youtube.com/watch?v=VEOV5vWfSgI

Of course freight trains are big polluters too:

http://www.blackanddecker.com/CordlessMower/

The smart, no-mess, no-hassles alternative to gas powered lawn mowers.
Cut the hassle out of cutting your grass with the Black & Decker 24 Volt battery-powered mulching mower. It saves time getting started without the frustrations of pull cords, messing with gas & oil, trips to the gas station, and costly maintenance. And without the fumes and the
spills from gas, you’re also saving the environment from harmful
emissions. And did you hear? It was rated the highest
performing cordless mower in 2008 by a leading
consumer magazine.
Easy to use AND powerful? No brainer!Benefits of the 24 Volt Cordless Mower

no gas No Gas to Mess With
– No fuel to store, spill or clean
– No need for tune-ups

easy to start Easy Starting
– No pull cord
– Starts with a pull of the switch

Environmentally Conscious
– Zero emissions in your yard
– Energy Star rated – Reduced noise
– No gas needed for operation, no spills
warranty

Service and Support – from the brand you trust

http://www.youtube.com/watch?v=ViC8ZY_-omM&feature=related

No I am not talking about these though I am going to be using one later today

http://www.ecomowers.com/URLrewrite.asp?404;http://ecomowers.com:80/Buy_s/56.htm?gclid=CP_R9Zqn-JkCFSbxDAodngJDFA&Redirected=Y


Sunlawn LMM40 Lightweight Manual Push Reel EcoMower Ships same day MSRP $179.00 Super Sale! $139.00 You Save $40.00!	Scotts 20 inch Classic Push Reel Lawn Mower Ships same day List Price: $169.00 Our Price: $159.00 You Save $10.00!	Brill RazorCut 38 Premium Manual Push Reel EcoMower Ships same day List Price: $249.00 Our Price: $239.00 You Save $10.00!

Cutting Swath: 16 inches (40cm) Cutting Height: 0.5 to 2.2 inches Weight: 19.3 pounds Blades: 5 Suitable for all North American grasses

http://www.youtube.com/watch?v=wph_bI10eVk&feature=related

This is What I am talking about…A manly TRACTOR:

http://www.electrictractor.com/

The Ultimate Non Polluting Series of

Electric Tractors

for Towing, Mowing and Moving

Can you go GREEN and still be cost effective?

Of course you can with our Electric Ox series of tractors!

Just look at some of the features and benefits of using our state of the art non polluting technology:

Quiet and Emission Free – ideal for indoor and outdoor applications

Minimal Operating and Maintenance Costs

Increased Productivity

Superior Power and Performance

Smooth, Intuitive Operator Controls

Instant On – No Idling required

Versatile Product Line

To learn more about the progress of the Electric Tractor Corporation Click Here.

To learn more about our Electric Ox product line, Click Here.

http://www.youtube.com/watch?v=-a248mSVtkM

We are talkin bad boys here:

http://electriclawntractor.com/

Edmond Electric Co. LTD.

Fantastic Investment Opportunity!

Use no more gas to mow your lawn! We offer a reliable, cost effective, and environmentally friendly alternative to conventional gas ride mowers.

About our Company

We are a new company, we became incorporated on Oct 17th 2003, over the last few years we have developed and tested this state of the art design, it will cut up to 2 acres of grass on a 50cent charge,

We have made design changes of a special model for a manufacturer in Europe,

We also are hoping to set-up factories to manufacturer electric tractors in Ontario, Canada, and the US and Europe

We have developed a patent pending special microprocessor controller for the kit: this acts as the brains for the tractor and incorporates the safety and other features of the tractor,

The electric tractor is a real pleasure to operate and you will appreciate the no worries starting in any weather with almost no maintenance features, your neighbours will also appreciate the lower noise levels of your electric tractor.

Sincerely,

Brian Edmond
President
Edmond Electric Co. Ltd
Canada.

http://www.youtube.com/watch?v=MFmrDin4Ovw&feature=related

wowowowowowowowowowow

http://www.modernelectrictractors.com/

Modern Electric Tractors Incorporated

Announcing the first commercially produced battery-operated riding lawn mower built in the United States since Wheel Horse discontinued their models in the mid-1980’s. The METI Classic. Please see the Products tab for pricing and specifications.

We have taken the original General Electric Elec-Trak concept and design of the 1970’s, which is proven, and then advanced it. Our first completed model is the METI Classic. The new METI Classic has a body-style which is very similar to the original Elec-Trak with minor changes. By following the original Elec-Trak design, the new Classic is compatible with the attachments built for the battery-operated Elec-Trak, New Idea, and Wheel Horse series of mowers of the 70’s and 80’s. We have upgraded the electronics, beefed up the frame, raised the height of the rear battery box to accommodate taller batteries, and incorporated a stronger lift.

Now this I can see:

http://www.youtube.com/watch?v=j0JiS6P1YBY&feature=related

Community Energy Systems

Censys.org

Category Archives: children and the environment