Hungarian Vulcan Association Combined – Thats right HVAC Fed Tax Credits

Posted on June 5, 2009 by Doug Nicodemus

(and its Jam Band Friday – http://www.youtube.com/watch?v=xwGL5LDb4u8 )

If you think that I am going to cover all the Energy Efficient HVAC options covered by these credits you would be out of your mind…It would take for ever. Even though it is Jam Band Friday and I could just sit around and listen to Eric Clapton all day. But first the Tax credits:

http://www.energystar.gov/index.cfm?c=products.pr_tax_credits#c3

HVAC	Central A/C	Split Systems: EER >=13 SEER >= 16Package systems: EER >= 12 SEER >= 14	30% of cost, up to $1,500²	For a list of qualified products, read this FAQ.Note — not all ENERGY STAR products will qualify for the tax credit. View ENERGY STAR criteria.
	Air Source Heat Pumps	Split Systems: HSPF >= 8.5 EER >= 12.5 SEER >= 15Package systems: HSPF >= 8 EER >= 12 SEER >= 14	30% of cost, up to $1,500²
	Natural Gas or Propane Furnace	AFUE >= 95	30% of cost, up to $1,500²	For a partial list of qualifying products go to: Air-Conditioning, Heating, Refrigeration Institute (AHRI) Not all ENERGY STAR products will qualify for the tax credit. View ENERGY STAR criteria for furnaces, boilers.
	Oil Furnace	AFUE >= 90	30% of cost, up to $1,500²
	Gas, Propane, or Oil Hot Water Boiler	AFUE >= 90	30% of cost, up to $1,500²
	Advanced Main Air Circulating Fan	No more than 2% of furnace total energy use. Read this FAQ if the fan qualifies, but the furnace does not.	30% of cost, up to $1,500²

(http://www.youtube.com/watch?v=hnz-wd9uMrY )

I can not believe that they are still offering tax credits for home heating oil furnaces. That is so late 1800s. The idea that they would be still supporting boilers for gods sake is so 1940s. Proof That some things never go away. While I much prefer ground based heat pumps Open Air heat pumps are just OK.

( http://www.youtube.com/watch?v=98XqT4kBWT4 )

Air Source Heat Pumps Split Systems:
HSPF >= 8.5
EER >= 12.5

SEER >= 15

http://www.qualitysmith.com/heat_pump/?src=got0058515ch001pGoogleAdWordsSearch&refcd=GO550t1257028S_air_source_heat_pumps&tsacr=GO2982392887

Find the Perfect Home Heating System

QualitySmith contractors will help you make the best heating system decision for your home and budget. Our partner contractors will walk you through the benefits and features associated with different system types. Just fill in our simple form to find 3 prescreened, reputable heating system contractors to help you make sure you’re ready for cold weather.

For a much broader discussion of this plus everything else under the sun:

http://www.century-ac.com/consumer_tax_incentives.htm

What are the efficiency requirements to qualify for the credits?

Manufacturers and retailers should be able to help you tell whether a specific product qualifies.

The qualification specifications are:

Furnaces and Boilers: Natural gas & propane furnaces must meet an Annual Fuel Use Efficiency (AFUE) 95 or higher, oil furnaces and gas, oil and propane boilers must meet an AFUE of 90 or better.
Central Air Conditioning Units:
- Central air conditioning units and air-source heat pumps must meet the highest tier standards set by the Consortium for Energy Efficiency (CEE) as of February 17, 2009, which in most cases requires a Seasonal Energy Efficiency Ratio (SEER) of 16. SEER measures performance throughout the cooling season. More information on the CEE specification.
Biomass Stoves: Stoves must have a thermal efficiency of 75% as measured using a lower heating value, and be used to heat a dwelling unit or heat water for use in the same. The law defines biomass fuel as anything from agricultural crops, trees, wood wastes & residues to pellets, plants, grasses and fibers.
Fans for heating and cooling systems: fan uses no more than 2% of total heating system energy use, as defined by DOE test procedure. For more information, see the Gas Appliance Manufacturers Association web site. It is still unclear how the 2009 Stimulus legislation has impacted this incentive – it seems reasonable to assume that the cost basis will be the reasonable cost of the fan, not the entire furnace. IRS has yet to issue specific guidance on this issue.
Water Heaters:
- Gas or propane water heaters—Energy Factor of at least 0.82, or a thermal efficiency of at least 90%.
- Heat pump water heaters—Energy Factor of at least 2.0

Where must the equipment be used?

Under guidance issued by the IRS, equipment is eligible if installed in a home occupied by a taxpayer as their principal residence at the time the equipment is installed. This implies that equipment in new homes is generally not eligible since in new homes equipment is generally installed prior to occupancy. However, efficient equipment in new homes can help that home qualify for the new home tax credit.

(There was so much more then Layla from Derek and the Dominos –http://www.youtube.com/watch?v=gxAKPBrjvqI )

If you are interested in the State Tax Incentives for Energy Efficient HVAC equipment here is an excellent site.

http://energytaxincentives.org/general/incentives.php

State and Utility Incentives

In addition to the federal tax incentives, complementary incentives may be available from your state or local utility. For information on many of these programs, see these links:

ACEEE’s State Energy Efficiency Policy Database
The Database of State Incentives for Renewables & Efficiency (DSIRE)
Energy Star’s Appliance Rebate Locator (by zip code)
California: The Flex your Power Briefing Room provides easy access to California energy efficiency outreach materials, press & media resources and campaign information for our partners, affiliates, media, journalists, and stakeholders.
Kentucky Incentives
New York: NYSERDA’s resource for clean, energy-efficient products and solutions.
Vermont: Efficiency Vermont
Wisconsin: Focus on Energy
State Energy Efficiency Index created by the Alliance to Save Energy
Programs and Incentives Information from the Edison Electric Institute
National Association of State Energy Officials

When in doubt you can always shop at SEARS

http://www.searshomeimprovements.com/ProductOffer1.aspx?OVMTC=Broad&site=&creative=2768202091&OVKEY=heat+pumps&gclid=CNHe7pK-85oCFQ3yDAodtlirdw&o=2&t=102&primary=true

Your choice in a home improvement company is a big decision. Choose a company you can trust for reliable products, service, installation and peace of mind on one of your biggest investments – your home. Choose Sears!

Reduce Energy Costs and get up to a $1500 Tax Credit from the 2009 Stimulus Package with a new Heating & Cooling System

As your heating & cooling system ages, it can lose its ability to heat or cool your home. Enjoy comfort year round with a new Heating & Cooling System for Sears.
:}

Gosh just like mom and pops

(http://www.youtube.com/watch?v=AscPOozwYA8 )

Metal Roofing And Reflective Roofing – I told you I would get to Chu’s call

Posted on June 4, 2009 by Doug Nicodemus

If you are reading this please click on our gooogle ads…CES is a nonprofit agency and we need all the money we can raise..THANKS

I used to say that the quickest way to green was WHITE. Simply painting your roof white with a durable white paint and backing that with a radiant barrier could cut cooling cost in the summer. People would say, “You don’t want to block heat in the winter.” Yah BUT that is a different issue. I always ask people to stay on topic because energy consumption is a complex issue and we must save energy where ever we can when ever we can.

First the Tax Code:

http://www.energystar.gov/index.cfm?c=products.pr_tax_credits#c7

Roofing

Metal Roofs,
Asphalt Roofs

All ENERGY STAR qualified metal and reflective asphalt shingles

30% of cost, up to $1,500²

View our FAQ on roofs that qualify for the tax credit

Then the rationale:

http://www.alternet.org/environment/140287/obama%27s_climate_guru:_paint_your_roof_white!/

Some people believe that nuclear power is the answer to climate change, others have proposed green technologies such as wind or solar power, but Barack Obama’s top man on global warming has suggested something far simpler — painting your roof white.

Steven Chu, the US Secretary of Energy and a Nobel prize-winning scientist, said yesterday that making roofs and pavements white or light-coloured would help to reduce global warming by both conserving energy and reflecting sunlight back into space. It would, he said, be the equivalent of taking all the cars in the world off the road for 11 years.

Speaking in London prior to a meeting of some of the world’s best minds on how to combat climate change, Dr Chu said the simple act of painting roofs white could have a dramatic impact on the amount of energy used to keep buildings comfortable, as well as directly offsetting global warming by increasing the reflectivity of the Earth.

“If that building is air-conditioned, it’s going to be a lot cooler, it can use 10 or 15 per cent less electricity,” he said. “You also do something in that you change the albedo of the Earth — you make it more reflective. So the sunlight comes down and it actually goes back up – there is no greenhouse effect,” Dr Chu said.

Why backed by a radiant barrier? Because light is made up of different lengths of waves. Loosely stated there are short wave lengths of light and long wave lengths of light. The short wave lengths bounce off the white but the long wave lengths keep on trucking.

So if you are putting a new roof on your first consideration is a metal roof:

http://www.metalroofing.com/

Appreciate Your Home with Quality Metal Roofing

If you’ve been considering upgrading your home and increasing its resale value, you should know that beautiful and enduring metal roofing is highly valued as one of the top renovation-friendly building materials for rehabbers and new home builders alike.

With resale values of up to 139% (Miami, FL), you can enjoy quality metal roofing on your home at virtually no cost!

As reported by Sal Alfano of Remodeling Magazine, homes renovated with standing-seam metal roofing show a rate of 85.9% cost recouped in the national average with up to 95.5% for homes in the Eastern states, a full 1 and 6% resale value gain over homes roofed with asphalt. And with all the added safety and longevity associated with quality metal roofing matching installation job costs that reach only one half of that of cosmetic room remodeling averages or even one eighth of that of a master suite addition, you hardly deny the sense in upgrading.

Find the Average Metal Roof Value in Your Area:

The following table shows average values associated with a typical roof renovation of 30 squares of standing seam metal, formed on-site into16-inch panels using factory-enameled roll steel (all seams double-locked) with brake-bent flashing from same material for drip edge and all flashing at roof-wall intersections, a 5-square hip roof with custom flashing at two average-sized skylights, a custom cap treatment, all applied over a new felt underlayment with rubberized asphalt membranes at eaves, valleys and all penetrations.

Market

Job Cost

Resale Value

Cost Recouped

Too pricey for your blood? Well then try reflective shingles.

http://findarticles.com/p/articles/mi_m0EIN/is_2005_March_2/ai_n11838044/

Elk and 3M Pioneer the First Reflective, Colored Asphalt Shingle

Business Wire , March 2, 2005

DALLAS — ElkCorp’s (NYSE:ELK) subsidiary, Elk Premium Building Products, Inc., (Elk) in a joint effort with 3M (NYSE:MMM) Industrial Mineral Products Division, introduced today the innovative Elk Cool Color Series shingle. Elk has created the first reflective, colored asphalt shingle, featuring 3M(TM) Cool Roofing Granules, that meets the initial performance levels of the ENERGY STAR(R) Program.

In the past, asphalt shingles meeting these reflectivity requirements were only available in white. Elk’s Cool Color Series shingle marks the first of its kind to offer homeowners energy efficient asphalt shingles in a choice of earth-toned colors.

Working Through The Feds Energy Tax Credits…It is going to be a long couple of weeks

Posted on June 1, 2009 by Doug Nicodemus

Let me start out with the statement: I AM NOT AND NEVER SHALL BE A TAX ACCOUNTANT. If you read anything here and apply it to your taxes without consulting one you are taking your life in your own hands. I will give you an example. My wife and I put a Metal Roof on our house last year. When we went to claim it on our taxes..WE Couldn’t!! Those crafty Bush people made it so the credits skipped every year…so they were effective in 2007 and 2009 but NOT 2008. God, I am so glad those people are gone.

So lets start with the frequently asked quests and go from there.

http://energystar.custhelp.com/cgi-bin/energystar.cfg/php/enduser/std_adp.php?p_faqid=5576&p_created=1235138592&p_sid=utTY71sj&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MjgsMjgmcF9wcm9kcz0zMTImcF9jYXRzPSZwX3B2PTEuMzEyJnBfY3Y9JnBfcGFnZT0x&p_li=&p_topview=1

How has the new Stimulus bill affected the tax credits for energy efficient home improvements?

	Answer
	On February 17, 2009, President Obama signed the “Stimulus Bill” (The American Recovery and Reinvestment Act of 2009) that made significant changes to the energy efficiency tax credits. These changes apply to products ” placed in service” in 2009. The highlights are: The tax credits that were previously effective for 2009, have been extended to 2010 as well. The tax credit has been raised from 10% to 30%. The tax credits that were for a specific dollar amount (ex $300 for a CAC), have been converted to 30% of the cost. The maximum credit has been raised from $500 to $1,500 total for the two year period (2009-2010). However, some improvements such as geothermal heat pumps, solar water heaters, and solar panels are not subject to the $1,500 maximum. The $200 cap on windows has been removed, but the requirements for windows (after June 1, 2009) has been increased significantly. Not all ENERGY STAR qualified windows will qualify after June 1, 2009. Specific information on what is covered by the tax credits.

What was available last year? (OH if only I had checked)

http://energystar.custhelp.com/cgi-bin/energystar.cfg/php/enduser/std_adp.php?p_faqid=5541&p_created=1233597206&p_sid=rBQTz1sj&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MjgsMjgmcF9wcm9kcz0zMTImcF9jYXRzPSZwX3B2PTEuMzEyJnBfY3Y9JnBfcGFnZT0y&p_li=&p_topview=1

	What tax credits were available in 2008 for energy efficiency home improvements?

	Question
	What tax credits were available in 2008 for energy efficiency home improvements?

	Answer
	The only energy efficiency improvements that are eligible for a tax credit in 2008 are: geothermal heat pumps (30%, up to $2,000) solar water heaters (30%, up to $2,000) solar panels (30%, up to $2,000) small wind energy systems (30%, up to $4,000) fuel cells (30%, up to $500 per .5 kW of power capacity) You need to file IRS Tax Form 5695 with your 2008 taxes to claim this credit. Tax credits for windows, doors, insulation, HVAC, and non-solar water heaters (that were available in 2006 & 2007) are NOT available for products installed in 2008, but they are again eligible for products installed in 2009 and 2010. More information on the tax credits for 2009 and beyond.

What does your handyman get? Blisters hahahaha

http://energystar.custhelp.com/cgi-bin/energystar.cfg/php/enduser/std_adp.php?p_faqid=2426&p_created=1145981147&p_sid=rBQTz1sj&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MjgsMjgmcF9wcm9kcz0zMTImcF9jYXRzPSZwX3B2PTEuMzEyJnBfY3Y9JnBfcGFnZT0x&p_li=&p_topview=1

	Are installation costs covered by the tax credits?

	Question
	Are installation costs covered by the tax credits?

	Answer
	Installation costs ARE COVERED for: HVAC (Heating, Ventilation and Air Conditioning) systems Biomass Stoves Water Heaters (including solar) Solar Panels Geothermal Heat Pumps Wind Energy Systems Fuel Cells The tax credit for HVAC, biomass stoves, and non-solar water heaters is 30% of the total cost (product + installation) up to $1,500. The law specifies installation costs include: “expenditures for labor costs properly allocable to the onsite preparation, assembly, or original installation of the property.” The tax credit for solar water heaters, solar panels, geothermal heat pumps, wind energy systems, and fuel cells* is 30% of the total cost (product + installation), with no upper limit. The law specifies installation costs include: “labor costs properly allocable to the onsite preparation, assembly, or original installation of the property and for piping or wiring to interconnect such property to the home.” Installation costs are NOT covered by the tax credit for: Windows Doors Insulation Roofs The tax credit for windows, doors, insulation and roofs is for 30% of the cost of materials only, up to $1,500. Read this FAQ on separating out the cost of installation for these products. Learn more at: energystar.gov/taxcredits *The tax credit for fuel cells is 30% of the cost, but limited to $500 per .5 kW of power capacity

Got other questions? Of course you do it is the IRS after all

http://energystar.custhelp.com/cgi-bin/energystar.cfg/php/enduser/std_alp.php?p_sid=J-2e9zrj&p_lva=&p_li=&p_accessibility=0&p_redirect=&p_page=1&p_cv=&p_pv=1.312&p_prods=312&p_cats=&p_hidden_prods=&prod_lvl1=312&p_search_text=&srch_btn_submit=%C2%A0%C2%A0%C2%A0GO%C2%A0%C2%A0%C2%A0&p_new_search=1

	Question

Question

Tomorrow – Doors and Windows…I can hardly wait. Oh and if you want this work done and you live in New York you might try:

http://www.remodeling-ny.com/

Bataan Nuclear Power Plant And Earthquakes – Shake, Rattle and Roll

Posted on May 22, 2009 by Doug Nicodemus

(it’s jam band friday – http://www.youtube.com/watch?v=20Feq_Nt3nM )

This maybe the longest list of Qualifiers I have ever published and I have to start by eating crow to boot. I made a missssstaaake yesterday. The piece that I was quoting yesterday was actually a piece on seismic activity, but I thought what it said was more applicable to Volcanic eruptions. I said that the Natib Caldera had erupted 3,000 years ago, but the actual article said that a major fault shift had occurred every 2,000 years. The last major fault shift was 3,000 years ago so a major Earth Quake was overdue. The caldera last blew 14 to 18,000 years ago and not enough is known about its activity to say what its periocity is. Whew, I feel so much better…A major earthquake in the area is overdue.

( I know that Shake Rattle and Roll isn’t really a jam song but what the heck it’s Friday)

As was noted in one of the comments in the seismic piece, the Philippines is not alone in either being on the Ring Of Fire nor is it the only Earth Quake prone zone in the world. Japan and America are both very sophisticated places technologically and also have extensive infrastructures to handle disasters in general. The Philippines is neither. Plus where are you going to evacuate too? It is an island. Not only that but the Japanese and the Americans have released a lot of radiation over the years. Look the big deal is Bataan is not fueled. Once it is fueld you might as well run it because everything is radioactive anyway. Drago in the US is just as much a threat. I bitched about it for years while it was being built and submitted written protest to the Nuclear Regulatory Agency in DC when it was Licensed.

( http://www.youtube.com/watch?v=MpT8Sd9wRlQ&feature=related )

So having said all that, the Philippines really shakes:

http://earthquake.usgs.gov/eqcenter/

http://maps.google.com/maps?f=q&hl=en&q=7.8686,126.8434(M5.7+-+Mindanao,+Philippines+-+2009+May+21+05%3A53%3A59+UTC)&t=h&z=7

Everyday. Why because the Philippines sits on the edge of a Techtonic Plate. So really BIG things can happen:

( Elvis shake those hips http://www.youtube.com/watch?v=dCBT7PfAEgc&feature=related )

http://www.drj.com/drworld/content/w1_116.htm

Earthquake Devastates Philippines

By Cathy Clark and Jim Taylor

On July 16, 1990 at 4:26 p.m. local time, a severe earthquake registering 7.7 on the Richter scale struck the northern Philippines. The earthquake caused damage over a region of about 7700 square miles, extending northwest from Manila through the densely populated Central Plains of Luzon and into the mountains of the Cordillera Central.
Over 5,000 people were reported dead or injured, and in excess of 2300 infrastructures were either destroyed or seriously damaged. While the quake was devastating, it was not an unusual occurrence in the Philippines; since 1950 alone there have been six major earthquakes at various locations in the archipelago, having magnitudes ranging from 7.3 to 8.3.

STRUCTURAL DAMAGE

Buildings were decimated by ground shaking, soil failure and liquefication (causing them to settle into the ground), and landslides.
Nearly all multistory buildings in the Philippines are constructed of reinforced concrete frames, supporting slab floors. Short-column failure was evident in many buildings observed to have the classic diagonal cracking where the column was acting as a short shear wall and could not carry the loads. Many unreinforced masonry infilled walls separated from the concrete frames and collapsed.
In the heavily shaken regions, two general types of disastrous failure to multistory, larger reinforced concrete buildings were observed–failed first stories and total building collapse.

First-story (or Soft-story) Failures

The ground floor of a building is frequently the weakest part of the structure. It is seldom enclosed on all four sides by walls capable of resisting shear forces, and it is also generally taller than upper floors. Ground floor shops, stores, lobbies, or garages normally allot most of their front wall area to doors or plate glass, leaving one side of the building with no shear resistance. Bending and shear forces induced by strong ground shaking are therefore concentrated in the ground-floor columns. As a result, the building may fail by collapse of only its first story, with the stronger upper section of the building remaining intact.

Multistory Failures

Many multistory building failures or “pancake” collapses (typically with structures of six to ten stories) were observed in the city of Baguio. One such collapse included a nine-story hotel which killed over a dozen occupants on the ground floor. This type of damage has been observed repeatedly in numerous earthquakes throughout the world where design and construction deficiencies exist.

( http://www.youtube.com/watch?v=m_SOmE5tfNo&feature=related )

Not only that but it appears to happen about once every 20 years or so:

http://www.absoluteastronomy.com/topics/1968_Casiguran_earthquake

The 1968 Casiguran earthquake occurred on August 2, 1968 at a magnitude of 7.3 on the Richter scale. The earthquake’s epicenter was located in Casiguran
Casiguran is a 3rd class Philippine municipality in the northern part of the Philippine province of Aurora province, Philippines. It is located 121 km from Baler, Aurora, the provincial capital…. Quezon

Quezon is a Provinces of the Philippines of the Philippines located in the CALABARZON Regions of the Philippines in Luzon. The province was named after Manuel L….(now part of Aurora province).The city of Manila, or simply ‘Manila’, is the Capital of the Philippines and one of the 17 cities and municipalities that make up Metro Manila…. was the hardest hit with 268 people were killed and 261 more were injured. Many structures that suffered severe damage were built near the mouth of the Pasig River

The Pasig River is a river in the Philippines and connects Laguna de Bay into Manila Bay. It stretches for and divides Metro Manila into two….on huge alluvial deposits. A number of buildings were damaged beyond repair while others only suffered cosmetic damage. Two hundred and sixty people died during the collapse of the 6-story Ruby Tower, located in the district of Binondo. The entire building, save for a portion of the first and second floors at its northern end, was destroyed. Allegations of poor design and construction, as well as use of low-quality building materials, arose. In the District of Santa Ana is a district of the City of Manila in the Philippines, located at the southeast banks of the Pasig River, bounded on the northeast by Mandaluyong City, Makati City to the east, southwest is the Manila district of Paco, Manila, and to the west, Pandacan, Manila…. one person was injured by debris from a damaged apartment building.
Two more people from Aurora sub province and Pampanga is a Provinces of the Philippines of the Philippines located in the Central Luzon Regions of the Philippines. Its capital is the City of San Fernando, Pampanga….
died as a direct result of the quake. Around the town of Casiguran, there were several reports of landslides, the most destructive one at Casiguran Bay.

( http://www.youtube.com/watch?v=t61oJT-d900&feature=related )

So let’s put our thinking caps on here. The Luzon Earth Quake happened in 1990 and Pinatubo happened in 1991. What if the Luzon earthquake had hit Manila like the Casiguran. I don’t think I would have wanted to have had to worry about a Nuclear Reactor popping off. Guess what it has been about 20 years…

The Bataan Nuclear Power Plant…What a dumb idea

Posted on May 21, 2009 by Doug Nicodemus

See, it’s not just that it’s a 1973 designed reactor on which construction was started in 1976 and finished in 1984, nor is it the fact that it had 4,000 safety violations, cost 2.4 billion $$$ and was finally paid off in 2004. No, it’s that it is inbetween an ocean and a bay, it’s on a fault line, and it’s in the flow path of a VOLCANO. One that is still ACTIVE. Everything about this screams “retard alert” or “danger will robinson danger”…

But it isn’t just one volcano it’s 2 in a chain of Volcanoes. Both Natib and Pinatubo Volcanoes are within 60 miles of the site.

http://en.wikipedia.org/wiki/Mount_Pinatubo

Natib is a whole nother booger that goes off about every 2,000 years and it has been 3,000 years since it went off..

http://www.philstar.com/Article.aspx?articleId=443497&publicationSubCategoryId=75

The 1992 Torres report

While he was still at Phivolcs, Dr. Ronnie Torres, a foremost expert regarding pyroclastic flows who is now at the University of Hawaii, warned of volcanism and faulting at the site in a 1992 report, “The vulnerability of PNPP site to the hazards of Natib volcano” (Phivolcs Observer, Vol. 8 No. 3: 1-4).Quoting Dr. Torres: “Natib volcano does not erupt very often but could still erupt.” As a rough rule of thumb, the longer a volcano is in repose, the more time it has to store eruptive energy, and thus, the stronger the eventual eruption caldera on Mt. Pinatubo.

The Sonido-Umbal 2001 Report to the Subic Bay Metropolitan Authority

Dr. Ernesto Sonido collaborated with Mr. Jesse Umbal to submit in 2000 an exhaustive, 38-page analysis for SBMA of the geology and geohazards of the Subic Bay area. Jess Umbal is one of the brightest, most competent volcanologists and geologists I know. Working with me during the Pinatubo eruption, he earned his Masters degree at the University of Illinois in 1993. Dr. Sonido is not a volcanologist, so we can assume that Umbal wrote those aspects in the report, which adjudged Natib as “potentially active.” The report documented two Natib eruptions that formed large calderas, one with a diameter more than twice as big as that of the new caldera on Mt. Pinatubo.

The Cabato et al. study

In 1997, Ms. Joan Cabato, Dr. Fernando Siringan and I of the National Institute of Geological Sciences of UP Diliman, collaborating with the Mines and Geosciences Bureau and the National Power Corp., initiated a geophysical study of the marine geology of Subic Bay. The study was supported as “due diligence” hazard evaluation by then SBMA Chairman Richard J. Gordon.

From a slowly moving boat or ship, we gathered 125 kilometers of “seismic reflection” data. That method puts powerful pulses of low-frequency sound into the water. The sound passes down through the water and into the layers of sediment below the sea floor. Some of the sound is reflected back upwards from the different sediment layers, and is collected by hydrophones trailing behind the boat. Much as if we took an X-ray, electronic equipment automatically uses the returned signals to make a detailed picture of the structure underlying the sea, in our case down to a depth of about 120 meters.

After we processed the data and prepared the manuscript, it underwent rigorous scrutiny by our geological peers in the Philippines and abroad, before it was published in the international Journal of Asian Earth Sciences. I am proud to have been part of that effort, which earned a Masters degree for Joan Cabato, a very bright young woman who recently earned her doctorate from the University of Heidelberg in Germany.

Quite by accident, we discovered a massive deposit of sediment that can only be explained as originating as a large pyroclastic flow from the large Natib caldera, in an eruption that occurred sometime between 11,000 and 18,000 years ago. That date has wrongly been called Natib’s latest eruption. A systematic study of Natib itself could find evidence of even younger eruptions.

So here is one of the BIG Questions what happens to a reactor when it washes out to sea. I have no answer but it sounds like a very bad idea. Some people would argue that it would just melt down and be encapsulated…but I got my doubts.

http://www.bataan.gov.ph/ragingpeninsula/mt.natib.trekking.html

BATAAN NATURAL PARK
Tala, Orani

Mt.Natib is the highest summit in the entire Natib Caldera System in the Bataan Natural Park, a dormant volcano with an elevation of 1,253 meters above sea level (masl). It lies between the larger Old Caldera and the smaller Pasukulan Caldera and represents the latest of the volcanic edifice to develop in the area. The slope is characterized by very steep forested slope. Mossy forest characterized by small-stunted trees occurs approaching the peak. The peak is covered by a small patch of grassland. Also found are boulders with inscribed names of American expeditionary forces that climbed the peak way back the 1930s.

Mountain climbers and nature lovers will find the mountain exciting and interesting since the forest is home to many floral and faunal species. Migratory birds are also seen in the area. A trail shelter is available for overnight trekkers to pitch their tents and enjoy a breathtaking sunrise. However local guides should escort visitors.

http://maps.google.com/maps?hl=en&tab=wl

What about the Earthquakes? More tomorrow.

Local 193 of the International Brotherhood of Electricians Announces a new Green Union Hall

Posted on May 19, 2009 by Doug Nicodemus

I could have picked any number of Google “friendly” topics today like:

Gasoline prices rise Oil prices don’t – because I have long argued that the refiners will restrict production to raise prices because of the Speculator Driven Oil Shock of 2008.

Obama to announce new mileage standards – because I argued during the campaign that if Obama wanted a real energy policy change he would ban the sale of gasoline in anything other than 1 gallon containers. Gas driven cars would disappear overnight.

There is a local story however that needs to be covered. Local 193 of the IBEW is breaking ground for a new union hall later this month and it is going to be a doozy. Geothermal, Solar and Wind, the whole enchilada. God I have always wanted to say that.

While there is nothing up on their websites yet (hint hint)

http://www.unions.org/home/v-28641-13-IBEW-.htm

http://www.ibew193.com/

Nor do they list the Building Committee on there web site. Here is what one of their better writers, Tim Landis, had to say in the State Journal Register. First in brief:

http://www.sj-r.com/business/x1393569371/Tim-Landis-Changes-to-Lincoln-Home-site-considered

The INTERNATIONAL BROTHERHOOD OF ELECTRICAL WORKERS 193 plans to break ground Friday for a union hall and training center at 3150 Wide Track Drive, just off Dirksen Parkway in Springfield.

According to the union, the “green building” will include solar panels that cover the roof, geothermal heating and cooling, and green space. Long-term plans are to add a wind-turbine. The training center will offer instruction in wind and solar technology.
The site is adjacent to the existing hall, which also will be upgraded once the new building is finished.

Then in a longer piece that talks about the Greening of Central Illinois:

The International Brotherhood of Electrical Workers Local 193 has begun construction of a new administrative office and training center at 3150 Wide Track Drive, just off Dirksen Parkway, in response to “green” trends in energy and job training, said business manager David Burns. The local represents about 800 workers in nine area counties.

“We just think that the green concept is more than right around the corner. It’s here,” Burns said.

In addition to use of geothermal heating and cooling, the solar panels on the roof are expected to provide most of the building’s electrical needs. Long-term plans are to add a wind turbine. Once the new hall is completed, the existing hall will be demolished to make way for green space, including landscaping and a retention pond.

But it’s the 12,500-square-foot training center that is the centerpiece of the green strategy for the labor union.

Plans are to offer hands-on training to apprentices in solar and wind technology. A “green jobs training curriculum” will include 70 lessons.

Burns said members already work on solar and wind projects, large and small, but that the training required will become more sophisticated along with the technology.

“We believe the demand is going to continue to grow,” Burns said. “As the technology gets better and better, we’re going to have to train people.”

He listed these jobs that could enlist Electricians:

Jobs of the future?
A state list of “green jobs” outlines the top jobs that should be available in coming years or that will require retraining as alternative energy use increases. Additional information is available at http://www.ilworkinfo.com.

Among the categories:
* Building retrofitting. Electricians, heating and air conditioning, carpenters, construction equipment operators, roofers, insulation workers, carpenter helpers, industrial truck drivers, building inspectors and construction managers.

* Smart grids. Computer software engineers, electrical engineers, electrical equipment assemblers, electrical technicians, machinists, construction laborers, operating engineers, electrical power line installers and repair technicians.
* Wind power. Environmental engineers, iron and steel workers, millwrights, sheet metal workers, machinists, electrical equipment assemblers, construction equipment operators, industrial truck drivers, industrial production managers and production supervisors.
* Solar power. Electrical engineers, electricians, industrial machinery mechanics, welders, welders, metal fabricators, electrical equipment assemblers, construction equipment operators, installation helpers, laborers and construction managers.

Way to go 193!

Windows That Generate Electricity – Integrated Photovoltaics and your house

Posted on May 14, 2009 by Doug Nicodemus

I said yesterday, how would your world change if everything on the outside of your house generated electricity? I skipped windows because they are a topic in and of themselves.

http://www.buildingsolar.com/design.asp#anchor138832Vision Glass

Photovoltaic (PV) vision glass substitutes a thin-film, semi-transparent photovoltaic panel for the exterior glass panel in an otherwise traditional double-pane glass window or skylight. Electric wires extend from the sides of each glass unit and are connected to wires from other windows, building up the entire system. The technology, while available in Europe, is currently being developed as part of a United States Department of Energy PV-BONUS project.

On the University of Wisconsin-Green Bay campus, the system, rated at about 11 kW, substitutes Building Integrated Photovoltaic vision glass for traditional windows in the Wintergarden of Mary Ann Cofrin Hall.

This system spans 2,000 square feet and generates about 12,500 kWh annually. The “PV Glass” unit was manufactured by Viracon, Inc. using BP Solar MST-43LV 43-watt, thin-film photovoltaic modules and was installed in a standard Kawneer Company 1600 PowerWall (TM). In this application, BP Solar laser-etched their photovoltaic modules to create a desired transmittance for the Wintergarden.

Artist’s rendering of Wintergarden.

A total of 252 modules were installed. Each vision glass surface has 13 layers of thin film, altogether thinner than one piece of paper, sandwiched between two protective layers of glass.

What if it was a SMART Window? One that opened when the house got too cold or too hot?

http://www.sciencedirect.com/science?_ob=ArticleURL&_udi=B6V2V-4MH8BDR-1&_user=10&_rdoc=1&_fmt=&_orig=search&_sort=d&view=c&_acct=C000050221&_version=1&_urlVersion=0&_userid=10&md5=4b8850a2c79f9f29640dca3f42ce3fde

Performance evaluation of a PV ventilated window applying to office building of Hong Kong

T.T. Chow ^,^a^,, K.F. Fong^a, W. He^a, Z. Lin^a and A.L.S. Chan^a

Received 29 June 2006;

revised 23 September 2006;

accepted 26 September 2006.

Available online 6 December 2006.

Abstract

PV ventilated glazing technology for application in warm climate provides energy saving opportunities through the reduction in air-conditioning load, the daylight utilization, and the green electric power generation. In a working environment, the use of semi-transparent a-Si glazing is deemed better than the one with non-transparent c-Si solar cells. This paper reports an evaluation of its integrated performance using a small office room in Hong Kong as an example. An energy model of a PV ventilated window system is first introduced. Based on this together with the TMY weather data of Hong Kong and the daylight simulation capability of the EnergyPlus program, the overall performance analysis have been executed for different window orientations. It was found that a solar cell transmittance in the range of 0.45–0.55 could achieve the best electricity saving.

It’s getting to be big business:

http://www.optoiq.com/articles/display/361842/s-articles/s-laser-focus-world/s-industry-news/s-konarka-partners-with-window-company-on-bipv-integrating-photovoltaics-with-glass.html

Konarka partners with window company on BIPV; integrating photovoltaics with glass

May 12, 2009–Konarka Technologies (Lowell, MA), a developer of Konarka Power Plastic, a material that converts light to energy, entered into an advanced product development agreement with Florida-based Arch Aluminum & Glass Co. Together, they plan to collaborate on building integrated photovoltaics (BIPV), with a memorandum of understanding to integrate Konarka’s patent-protected thin-film solar material into glass for various commercial BIPV applications (see “ Thin-film and organic photovoltaic manufacturing to reach 29 GWp” and “THIN-FILM PHOTOVOLTAICS: The key to success is higher efficiency“).

“Konarka is making great strides with our aggressive plans to expand into various markets, including building and construction,” said Rick Hess, president and CEO at Konarka. “Because our solar material is flexible, lightweight and semi-transparent, it integrates easier and is more aesthetically appealing than other solar products, making it ideally suited for BIPV applications. We expect that our collaborative work with Arch Aluminum & Glass will advance the delivery of Konarka Power Plastic on a large scale basis into this market segment.”

Arch Aluminum specializes in a wide range of artistic and architectural glass products to keep pace with the demands of today’s architects, designers and building developers. The company offers in-house laminating, heat-treating and fabrication technology as well as selective, engineered, off-the-shelf aluminum and glass products.

“Until today, aesthetic and performance concerns limited the ability of architects to use BIPV technology in their designs,” said Arch CEO Leon Silverstein. “This product development investigation is about the creation of a new product category, one that had been unavailable until today. It is energy-efficient and transparent with superior vertical performance and a subtle red, blue or green aesthetic. With these features, BIPV will no longer need to be confined to spandrel or overhead applications. An entire building can be put to use, producing its own power, and looking good doing so.”

In October 2008, Konarka opened the largest roll-to-roll flexible thin film solar manufacturing facility in the world, preparing for the commercialization and mass production of its solar material for various market segments including sensors, consumer products, tent and fabric structures, greenhouses, marine and boating, building construction, as well as fashion and accessories, among others.

This would be Barack Obama’s GREEN Economy or as I like to say Greenomy.

Flexible Solar Photovoltaics – They could change your view of electrical power forever

Posted on May 13, 2009 by Doug Nicodemus

What would the world look like if every surface of your house generated electricity. This is a very practical issue. During the illegal rate hikes of 2007 my brother Mike who owns an all electric house figured that for him to got off the grid it would take a 10 kilowatt system. At the time using only solid solar panels he figured there was not enough space on his roof to put the power generation there. But what if every surface of his house except the windows generated power. I am sure that he has enough sun facing surfaces to generate that much power. (more on the windows later. and yes I did recommend a personal windmill but…)

First there is the flex version of a stand panel which is light enough to hang on exterior walls:

http://store.altestore.com/Solar-Panels/Flexible-Rollable-Solar-Panels/c679/

Flexible Solar Panels, Flexible Portable Solar Panels, Solar Energy Panels from

Flexible solar panels are the perfect low wattage, environmentally friendly and space efficient energy solution. If you have an appliance or gadget that requires between 5 and 20 watts of power, these versatile flexible portable solar panels will be just the right fit. Just use these solar energy panels to charge up the battery you want to use to run your basic necessities. You can roll them up to move them or store them or install them semi-permanently. These are a great solution for camping or marine excursions where you may not have sufficient room for a traditional solar panel. These flexible solar panels come in multiple sizes and can offer multiple wattage power and they all weigh less than 2 pounds.

It can even bend around corners:

http://www.siliconsolar.com/flexible-solar-panels.html

Flexible Solar Panels: The lightest thin film flexible solar panels on today’s market are available from Silicon Solar.

Solar technology has reached its most convenient, lightweight form: the newly-engineered flexible solar panel. Silicon Solar is the proud carrier of over 50 modules of flexible solar panels, offered in a variety of sizes.

Through recent developments, Silicon Solar has provided ways of listing thin, light weight, flexible solar panels allowing for multiple applications to now be solar accessible that never were before.

Thin Film solar cells and panels now allow for several types of application to be introduced into the market including solar backpacks, solar thin film clothing and athletic apparel. We at Silicon Solar have taken these methods to the extreme and receive requests from customers who give us incentive and constructive feedback on developing new ways of utilizing this technology not only for them, but for you as well. Each flexible solar panel can be rolled up to 2 inches in diameter, making the paper thin solar cell one of the most durable and long lasting solar modules on the market.

What about a tent that generates all the electricity you need on a camping trip? I can’t show you much of the website because it is too heavey into video but:

http://www.powerfilmsolar.com/

What’s New

Earth Care Products Using PowerFilm Technology
A stick-on solar panel to use to charge golf cart batteries while out on the course is voted the year’s best new product by the PGA.
http://www.solarenergygolfcarts.com/

PowerFilm’s USB + AA Solar Charger took second place in the Mobile CE – Fashion & Lifestyle Products competition at CTIA Wireless 2009.

Nearly 300 products were submitted for consideration for the various catagories and PowerFilm was among the few to be recognized.

Temporarily Unavailable
The RA-5 Accessory (12-Volt Deluxe Universal Battery Charger/Analyzer/Conditioner) is temporarily out of stock. Sorry for any inconvenience. Please check back soon!

Finally what if your drapes in your windows or the couch in the bay window could be generators? Now imagine everyhouse in the United States outfitted this way.

http://www.sciencedaily.com/releases/2008/06/080617114723.htm

Getting Wrapped Up In Solar Textiles

ScienceDaily (June 21, 2008) — Sheila Kennedy, an expert in the integration of solar cell technology in architecture who is now at MIT, creates designs for flexible photovoltaic materials that may change the way buildings receive and distribute energy.

These new materials, known as solar textiles, work like the now-familiar photovoltaic cells in solar panels. Made of semiconductor materials, they absorb sunlight and convert it into electricity.

Kennedy uses 3-D modeling software to design with solar textiles, generating membrane-like surfaces that can become energy-efficient cladding for roofs or walls. Solar textiles may also be draped like curtains.

“Surfaces that define space can also be producers of energy,” says Kennedy, a visiting lecturer in architecture. “The boundaries between traditional walls and utilities are shifting.”

Principal architect in the Boston firm, Kennedy & Violich Architecture, Ltd., and design director of its materials research group, KVA Matx, Kennedy came to MIT this year. She was inspired, she says, by President Susan Hockfield’s plan to make MIT the “energy university” and by MIT’s interdisciplinary energy curriculum that integrates research and practice.

http://web.mit.edu/newsoffice/2008/solar-textiles-0609.html

MIT lecturer focuses on flexible photovoltaic materials

Sarah H. Wright, News Office
June 9, 2008

This spring, Kennedy taught a new MIT architecture course, Soft Space: Sustainable Strategies for Textile Construction. She challenged the students to design architectural proposals for a new fast train station and public market in Porto, Portugal.

For Mary Hale, graduate student in architecture, Kennedy’s Soft Space course was an inspiration to pursue photovoltaic technology in her master’s thesis.

“I have always been interested in photovoltaics, but before this studio, I am not sure that I would have felt empowered to integrate them into a personal, self-propelled, project,” she says.

Kennedy, for her part, will pursue her research in pushing the envelope of energy-efficiency and architecture. A recent project, “Soft House,” exhibited at the Vitra Design Museum in Essen, Germany, illustrates what Kennedy means when she says the boundaries between walls and utilities are changing.

For Soft House, Kennedy transformed household curtains into mobile, flexible energy-harvesting surfaces with integrated solid-state lighting. Soft House curtains move to follow the sun and can generate up to 16,000 watt-hours of electricity–more than half the daily power needs of an average American household.

Tidal Generators – Let’s harness the Moon before it drifts away

Posted on May 8, 2009 by Doug Nicodemus

It’s Jammin Band Friday. Not only that but I have spent so much time this week hyping the Wind Power 2009 conference/convention that I thought I should end on a surfin note:

http://www.youtube.com/watch?v=QKROlUWkbsQ

It is a little know fact that the moon is moving away from the Earth at about an inch per year. We know this because on one of the Apollo Landings (quick for those of you who don’t believe that they ever happened -CLOSE Your Eyes) they placed an aluminum block on it’s surface. Since that time and with intensifying accuracy we have been bouncing lasers off of it and this has allowed us to determine the distance to the moon (its original purpose) but the unexpected find that that distance is widening…Anyway this means that eventually the Moon will drift away into space. I think we should harvest its today power while we can. I mean in a million years or so it could be gone. Here is a huge thought problem for you…Where will it go?..Whoa

http://www.youtube.com/watch?v=oz-I2pYc4Kg

http://www.gedwardcook.com/

We The People

Life Liberty and the Pursuit of Happiness: Health Care is a RIGHT

Solar Power The Wave of Tomorrow!!! The three devices The Syphon Wave Generator , The Floating Wave Generator and The Under The Bottom Generator could have a major effect in stopping global warming by converting ocean waves into electricity. Click Here to see the new Syphon Wave Generator video on You Tube!! The Syphon Wave Generator The Floating Wave Generator The Under the Bottom Generator Patent No. 7355298 04/08/2008 Patent No. US 7315092 01/01/2008 Patent Pending No. 61204580 The Three inventions are being developed by Green Wave Energy Corp www.GWEConline.com

Click these links for more information and videos NEW! WORKING SYPHON MOVIE THE FLOATING WAVE GENERATOR There will soon be a new video of a working Floating Wave Generator producing Hydrogen and Real Power and The Under the Bottom Generator!!

ARE YOU READY FOR REAL CHANGE? How about a power plant for less than $1 per watt to construct and install? Click here for more information!

For Energy Saving Products including: Wind Mills Solar Collectors and Power Save Products go to GWEC www.GWEConline.com

WHAT WILL THESE GENERATORS DO? STOP GLOBAL WARMING! These units could produce enough power to replace most oil, coal and nuclear power plants with 100% solar produced electricity. The Syphon Wave Generators would produce enough electricity at such a low cost they would make it possible to separate the hydrogen from ocean water and store it in power cells to use in our cars and trucks. We would also be able to convert homes now powered with heating oil to electric heat saving billions of gallons of oil per year. I estimate one square mile of Syphon Wave Generators, in good locations with average two meter waves, would produce as much power as ten nuclear reactors. 1,000,000,000 watts! FEED THE HUNGRY! Today we are growing more and more crops to convert into fuel to run our cars. These crops could feed every hungry person in the world. I find this unconscionable. We could and should be using our farm land to grow food crops and use the solar power to power our world. We could do this and the Syphon Wave Generator and the Floating Wave Generator are tools to help make this happen.

Thanks for your interest G Edward Cook :}http://www.youtube.com/watch?v=D6HQtZFxcUo

http://blogs.tampabay.com/energy/2008/10/wave-power-gene.html

October 02, 2008

Wave power generator cranks up off Portuguese coast, and Oregon may be next

The world’s first commercial wave power project has cranked up at last three miles off the Portuguese coast, CNN reports. The first phase is expected to generate 2.25 megawatts, enough power for 1,000 homes, according to the Guardian.

“If successful, a second phase will see energy generation rise to 21 megawatts from a further 25 machines providing electricity for 15,000 Portuguese homes,” CNN says.

The generators, made by a company called Pelamis, are three red cylindrical converters (shown here) which are partially submerged in the Atlantic Ocean. “Moving up and down on the endless waves of the open sea, they convert motion into electricity, without emitting any of the carbon dioxide that is warming the planet,” the Guardian notes.

http://www.youtube.com/watch?v=SxYbR-YyNjs

http://www.sri.com/news/releases/080307.html

Novel Wave-Powered Generators Deployed in Sea Trials off Florida Coast

Technology from SRI International Offers Clean Energy Production from Ocean Waves

Wave Buoy ST. PETERSBURG, FLA. – August 3, 2007 – SRI International, an independent, nonprofit research and development organization, announced today the deployment of a prototype buoy-mounted, ocean wave-powered generator off the coast of Florida in the Tampa Bay. Beginning today, SRI will test the wave-powered generator for approximately two weeks. The deployment is part of a program sponsored by HYPER DRIVE Corporation, Ltd., a Japanese company focused on development and deployment of wave-powered generators around the world.

SRI’s wave-powered generators can be deployed on existing ocean buoys that use batteries as their energy source. SRI’s new generator utilizes patented electroactive polymer artificial muscle (EPAM™) technology, and offers a renewable method to continually power ocean buoys. SRI will use instrumentation that allows remote monitoring of the generator’s output energy as well as wave height and buoy motion. Assisting the Menlo Park, California-based research team are researchers in SRI’s new Marine Technology Program, which is located in St. Petersburg, Florida. SRI is also working with Artificial Muscle, Inc., an SRI spin-off company and the exclusive licensee of EPAM, in the development of the EPAM components for the wave-powered generators.

“HYPER DRIVE is excited to work with SRI on this important application of EPAM technology,” said Shuji Yonemura, CEO, HYPER DRIVE. “We see great potential in applying this technology to wave-power generation around the world in the near future.”

“When SRI International opened its operations in St. Petersburg earlier this year, we anticipated great strides in marine research like we see today,” said St. Petersburg Mayor Rick Baker. “This energy-generating technology is a perfect fit for an industry based in St. Petersburg, which was designated Florida’s first and only green city by the Florida Green Building Coalition.”

http://www.youtube.com/watch?v=jOuS04rPwj4

http://www.treehugger.com/files/2007/02/bouncing_buoy_w.php

Proving once again that there is little new under the sun (or the waves) is this 1932 version of the wave power generators that we showed here and here. It works on the basis of an “inertia motor” where “When a wave starts to lift the hollow sphere, the massive weight inside, because of its inertia, resists the movement and exerts terrific pressure in the lower cylinder. Finally the inertia of the weight is overcome. Then it possesses momentum. When the sphere reaches the crest of a wave, the combined effort of the momentum and the recoil of the huge, semi-elliptic springs exerts an equal pressure in the upper cylinder. The tremendous pressure is applied to oil, which, in turn, operates a special turbine which runs a generator. The current is conducted to the shore by submarine cable.” ::Modern Mechanix

Heaven Let The Light Shine Down – indeed

http://www.youtube.com/watch?v=QKROlUWkbsQ&feature=related

Wind Power 2009 In Chicago – It is the last day and I thought I would at least put up something

Posted on May 7, 2009 by Doug Nicodemus

I checked the Tribune – nothing. I checked the Sun Times – nothing. I googled and got several up and coming Wind Power Conventions/Conferences – nothing:

Wind Power Asia

http://www.windpowerasia.com/

Wind Power Transmission

http://www.windpowertd-events.com/

Small Wind Conference

http://www.the-mrea.org/smallwind.php

This one that happened in Chicago in MARCH:

http://www.platts.com/Events/2009/pc908/

The Oil Drum won’t load up:

http://www.theoildrum.com/

Connection Interrupted
The connection to the server was reset while the page was loading.
The network link was interrupted while negotiating a connection. Please try again.

Fucking geniuses

In desperation I started reading Peak OIL. By God they came through:

http://www.peakoil.com/

Thankyou Coyote

http://www.peakoil.com/modules.php?name=News&file=article&sid=48183

Reuters too of course:

http://www.reuters.com/article/GCA-GreenBusiness/idUSTRE5457XA20090506

Some Americans clamor to try wind power at home

Wed May 6, 2009 6:30pm EDTBy Andrew Stern

CHICAGO (Reuters) – The idea of wind turbines churning out free electricity alongside every home and office building has appeal, judging by the throngs around “community wind” purveyors at a Chicago wind power convention this week.

Darrin Russell of Southwest Windpower was inundated with questions during the Windpower 2009 convention where he explained the economics of the company’s workhorse 2.4 kilowatt Skystream turbine, which plugs into the local electrical grid.

“It’s nice watching the (electricity) meter go backward. Sometimes it gets going pretty fast when the wind blows hard” which it does often at the company’s headquarters in Flagstaff, Arizona, he said.

Russell paid practically nothing for his own turbine, which costs roughly $14,000 to buy and install, thanks to a newly enacted 30 percent federal tax credit for wind projects large and small, state tax credits and rebates of up to $9,000 from many utilities eager to promote renewable energy. The first month his electricity bill was zero.

The company sells to business, homeowners and developers.

“Some companies like to line them up outside instead of flags” to promote their green credentials, he said. “Helps keep their offices cool at least.”

Retailers can draw in environmentally conscious customers if they have a wind turbine outside, experts say.

Potential buyers from Chile, South Korea and the state of Michigan flocked around Southwest Windpower’s olive-green machine with three distinctively curved blades, designed to cut noise. Russell said the company has sold 5,000 small turbines in the past two years, and 150,000 in total.

Community Energy Systems

Censys.org

Category Archives: electricity