Earthships – Michael Reynolds and the build your own eco habitat

There is so much about this guy and his projects. The good news is that they are finally winning the building code battles. Oh and of course they ran up against the utility companies too. They hate houses that do not use power. So these are not houses for the faint of heart.

http://www.vaboomer.com/the_portal_to_boomeranger/2009/03/earthships-part-i.html

Earthships – Eco-Friendly Houses for the Future (Now?) Part I

Biotecture – from Trash to Shelter Earthship3

Just think — a house made of discarded garbage; used tires rammed with earth, soda bottle walls.  And the cost to heat?  $40 per month in the ‘dead of winter’.

The brainchild of architect Michael Reynolds, earthships are truly the homes for the future.

An Earthship is a type of rammed-earth house, sort of a modern version of a Native American pueblo dwelling. It is a utopian type of passive solar home made of natural and recycled materials such as earth-filled tires.  The home is “bermed,” meaning that dirt is gently placed, from ground to roof line, on the northern, eastern, and western sides of the home.  The berm is about 15-20 feet deep. They’re much more than houses — they provides shelter, heating, cooling, power, water and sewage. In these very tough economic times, there are people in America living very comfortably with a zero, yes, zero utility bill. They live in Earthships, beautiful homes made out of recycled tires and bottles, built completely off the grid.

Architect Michael Reynolds

Mreynolds

The Earthship, as it exists today, began to take shape in the 1970s. Mike Reynolds, founder of Earthship Biotecture, a company that specializes in designing and building Earthships, wanted to create a home that would be sustainable, rely on natural energy sources and be economically feasible for the average person with no specialized construction skills to be able to create.

:}

Doesn’t hurt to have a certain level of skills and can do spirit.

http://www.earthships.com/

Earthship Landing:
A Pictorial History

My name is Stuart Simmons and I built an Earthship home near Durango, Colorado. I decided to make the photo journey of my experience available to the public because there wasn’t much available in the WWW Land about alternative structures and there is quite a bit of interest in building alternatively. I used to live in the Bay Area, but due to the Rat Race and several other factors, I decided to move to Durango where I found my piece of Heaven. The pictorial history of Earthship Landing on the Internet is an ongoing process. I will start off by putting the pictures on the web as I believe this is what people mostly want to see, but over time I will add a lot more text to the pages of my experience of building the home and what it’s like to live in a house made of tires. The way I am going to set up the pages is like a book. each page will have one or two pictures two help keep it small for downloading. I am going to start at the beginning and go through the history of building the Earthship. At the end of the book I will also show some other peoples Earthships and how they have built them differently. Let’s get on with it . I would love to hear from you once you have seen these pages. If you know of another link which you think should be included in these pages, then please let me know its URL and I will include it. If you know of other styles of alternative houses, please let me know and I will include them as well. You can E-mail me at Info@Earthships.com

:}

I mean you have got to admire people like this. Why wasn’t I born that cool?

http://www.greenhomebuilding.com/earthship.htm

Earthships

The Earthship concept is the brainchild of Michael Reynolds, who has written several books on the topic. Near Taos New Mexico, where he has his Earthship Biotecture business, are whole communities of earthships. The basic earthship design incorporates substantially bermed, passive solar architecture. The primary retaining walls are constructed with used tires, filled with earth and stacked up like bricks. The interior surface of the tires is then plastered with adobe or cement so the tires don’t normally show. Mike has also pioneered the use of empty aluminum cans mortared into lightweight, curvable walls. Earthships often employ many ecological concepts, such as water catchment from the roof, reuse of greywater, composting toilets, indoor gardening, etc.

While some of the work of building is simple to do, it also tends to be very labor intensive. Furthermore, the wood framing required is not simple. Some of the earlier designs tend to overheat, especially in the summer, because of the slanted glass to the south. I have seen some truly elegant earthships, along with some that are pretty funky. Engineered plans are available that seem to please building inspectors, as these have been built in many localities.

Here is a 5 minute radio interview with Kelly Hart talking about Earthships:

:}

Please go to the above site and listen to the radio interview…we may yet survive.

:}

Where An Energy Audit Can Lead – We started this meditation on caulk and CFL’s

[we are coming up on Herbie Hancock’s 70th birthday so..]

It’s Jam Band Friday – ( http://www.youtube.com/watch?v=XrgP1u5YWEg )

But the discussion leads directly to considering the use of you own generation devices. People have been trained over the years to “pay their energy bills as they go”. What if you paid your energy bill before you used it. Electricity is not a commodity and energy services are your birthright. OoopS there I go again getting all radical. But it is not radical to be thrifty. It is not radical to be kind to the Earth. It is not radical to teach your kids sustainable practices. The internal combustion Engine is primitive and must be gotten away from. The days when we could just burn large amounts of “stuff” and consume large amounts of “stuff” are over, whether we like it or not…anyway here’s some solar POWER…

http://www.andalaysolar.com/cm/Home.html

Introducing Andalay AC

The First Plug and Play Solar Power System

ANDALAY AC – GET THE WHITEPAPER! SEE THE INSTALLATION VIDEO!
Built in Reliability & Safety Solar systems must last decades in the harsh environment of your roof. But years of sun, wind and rain can corrode the different metals and eat through unprotected wiring found on ordinary solar systems. Both lead to a failed investment.

Andalay, the next generation in solar power systems, engineered away these flaws with its award-winning revolutionary design. Protected wiring, assembly in a quality-controlled factory environment, and superior framing, grounding and wiring deliver a system that is built to provide decades of reliable solar power performance. Learn More » Maximum Lifetime Performance With Enphase micro-inverters built right into each panel, Andalay delivers decades of powerful performance. Unlike ordinary solar panels where their power production varies from hour to hour, each Andalay panel consistently operates at its maximum power potential. Additionally, these revolutionary panels continue to operate at maximum power even if one panel goes down compared to ordinary panels where the malfunction of one panel from shading or other failures takes down all of the panels. As a result, these revolutionary panels can perform 5% to 25% higher than ordinary panels. Learn More » Beautiful Appearance on your Roof In addition to its unparallel reliability, Andalay’s award winning design showcases a sleek, beautiful, design that compliments your home. With 80% less parts and fewer penetrations to your roof, Andalay’s slimmer panels, invisible electrical cabling and hidden mounting system take up less room on your roof while showing off a revolutionary design. The end result is an attractive system that ends electricity bills and fights green house gas. Learn More »

:}

( http://www.youtube.com/watch?v=0hmVHhH96es )

http://www.amerescosolar.com/SolarSite/SolarSiteMain.aspx?tsid=googleppc&gclid=CMrFjcKgoqACFQMhDQodkylFag

Solar electric power, known as photovoltaic (PV) technology, makes use of the abundant energy from the sun. It can be used in a wide range of products, from small consumer items to large commercial solar electric systems.

Few power-generation technologies have as little impact on the environment as solar power.
It quietly generates electricity from light and produces no air pollution or hazardous waste.
It doesn’t require liquid or gaseous fuels to be transported or combusted. And because its energy source—sunlight—is free and abundant, it can guarantee access to electric power.
Learn More

:}

( http://www.youtube.com/watch?v=jo5GcYeh7XA )

http://www.solarliving.org/display.asp?catid=49

SLI: On-site and Online Solar Training and Certification
Promoting Sustainable Living through Inspirational Environmental Education

About Us
Workshops
Online Workshops
Solar Living Center
Other Programs
Shop
Internships
Support Us
Resources
First Name

Last Name

Address

Address2

City

State

Zip

Email

Country



HomeAbout Us

About Us

Established in 1998 as a spin-off from Real Goods Trading Company, the Solar Living Institute in Hopland, CA, is a 501(c)(3) non-profit educational organization whose mission is to promote sustainable living through inspirational environmental education. The Institute provides practical, education by example and hands-on workshops on renewable energy, green building, sustainable living, permaculture, organic gardening and alternative, environmental, construction methods.

The Institute is headquartered at the Solar Living Center, a gorgeous 12-acre renewable energy and sustainable living demonstration site visited by nearly 200,000 people annually in the heart of Northern California’s wine country in Hopland, California. Since its inception nearly two million visitors have experienced the Solar Living Center.

The nonprofit Solar Living Institute depends upon your support to continue to offer you rich educational programs. Please support the Institute by joining our Membership Program, making a gift online, becoming an intern, or volunteering.

Newsletters 2010
Our Mission
Staff & Board
History of SLI
FAQ
Employment
Contact Us

:}

( http://www.youtube.com/watch?v=c6WrK7m4ZPk&feature=related )

http://www.affordable-solar.com/residential.solar.home.htm

Residential Solar

Affordable Solar takes you through the process of powering your home with solar. One-stop and turn-key, we do it all for you.

Solar 101

Learn the Basics

System Sizer

Enter your information and find your system and cost.

GT Kits

Go here to buy pre-packaged kits.

Installer Network

View our map of residential solar installers.

How It Works


Learn more about how solar works in Solar 101.

Example Systems


Example systems that are currently up and running.

Residential Solar

There are many terms for Residential Solar Energy System such as Grid-Tie (tied into the energy grid), Residential Solar, and Home Solar, but they are all the same thing: a solar electric system that provides clean and renewable power from the sun.

:}

Happy Birthday

http://www.youtube.com/watch?v=ZMqvDV-lYVc&feature=related

:}

Commercially Sold Solar Water Heaters – If we all heated water this way our burning behavior could be cut in half

I mean I am talking world wide. If every women in the world heated water this way their lives would immediately improve and their effects on the environment would come to a stop. They probably would even live better lives. Every bride should demand one.

http://www.radiantsolar.com/solar_options.php?gclid=CLXv0KCWnaACFQvyDAodrxs6Xw

Solar Options

Here are some of the things that a solar heating system can do for you:

SOLAR DOMESTIC WATER HEATING

kids in a tub of domestic hot water The production of domestic hot water is one of the most beneficial and cost effective uses of thermal solar collectors. Many people would be surprised to learn how much energy and environmental impact is required for this use. Water has a “polar” molecular structure and for that reason it requires an unusual amount of energy to change its temperature. In fact, the “heat capacity” of water is about 4 times that of concrete or cast iron. It is a “year around” function that rounds out other seasonal or intermittent solar applications and improves the cost benefit or investment value of the solar heating system. In many places, solar domestic water heaters are eligible for tax credits. We include the domestic hot water heating element in nearly everything we do because it addresses important mechanical issues such as summertime heat control and heat dumping.

:}

http://www.solardirect.com/swh/swh.htm

Passive Solar Water Heater Active Solar Water Heater Trendsetter Solar Water Heater
Warm Climate
ProgressivTube
• Solar Hot Water Passive
system
• Easy to install and
maintain; no moving
parts
• Storage tank must be
installed above or close
to collector
• Uses no electricity; will
function during
blackouts
• Price range:
$1,700.00 – $2,600.00
Moderate Climate
Helio-Pak
• Active Solar Hot Water,
flat plate type
• Pumps, valves &
controllers assist in the
prevention of freezing
• Tanks do not need to
be installed above or
close to collectors
• Uses electricity; will not
function during
blackouts
• Price range:
$2,200.00 – $5,200.00
Cold Climate
TrendSetter
• Solar Hot Water Active,
evacuated tube
• Heavy-duty residential
and commercial
• Additional applications:
Water heating, Radiant
floor heating, Space
Heat
• Price range:
$6,000.00 – $17,000.00

:}

These people are a lot of fun. They been at it for 31 years.

Solarroofs Solar Water Heating Collectors, Commercial & Residential

Welcome to SolarRoofs.com!
solar water heating, solar water heater, solar hot water
Welcome to SolarRoofs.com Inc.
Manufacturer of Easy, Attractive and Affordable

Skyline Solar Water Heaters
We are Dedicated to Making Quality, High Performance Solar Water Heaters that are Easier and Safer to Install. Skyline Collectors Feature 26 Architectural Trim Colors.

Using energy from the sun to heat water is one of the oldest uses of solar energy! Today, millions of homes and businesses around the globe use solar water heating systems because they are so cost effective!

Solar water heating produces energy at 1/3 to 1/4 the cost of Solar Electric (PV). Solar hot water systems are a perfect complement to a PV system and make your solar investment more cost effective. With 30% Federal Tax Credit and other State and Utility incentives, now is the time for you to Harness The Sun for your share of FREE solar energy!

Solar water heaters are the most cost effective way to reduce carbon emissions and reduce dependence on imported energy.

line Please see our GOING SOLAR page to learn more!


We provide extensive Sales Support via our toll free number:

(888) 801-9060

or Email us via our

Contact Page

l

Please Visit our

ONLINE STORE

For Great Values!
l
We look forward to helping you Find a Dealer, Place an Order, or Design your Solar Thermal System!

Extreme Home Makeover with SolarRoofs.com

extreme makeover home edition We have a 31 Year Passion For
Solar Water Heating!

Our Patented Solar Hot Water Collectors have appeared on:
ABC’s Extreme Makeover – Home Edition, History Channel’s
Modern Marvels & Di

:}

I Was Gona Do Another Post On Solar Water Heaters – The commercially available ones complete with installation

I was going to include a rant here:

That Americans have been brainwashed to believe that  energy isn’t free. The point being that if all we allowed was renewables that is all we would have. If we mandated geothermal and solar water heating for residential then in 20 years most of America would be off the grid. But powerful mining operations employing 1000s of people and powerful oil interests employing 10s of 1000s of people are never going to allow that, let alone the utility industry which employs millions of people. Then I ran across this article on PeakOIL and I thought isn’t this a much better way to put it…more on solar water heaters tomorrow.

(This was my original lead in march with the below citation for an obscure publication that ran an interesting article about the transition movement in Milwaukee of all places. I am not even sure I like the town that much..But after a nasty interaction with the editor I have taken that piece down completely…..June, note DN)

According to this dreadful woman:

From: Katherine Keller <editor@bayviewcompass.com>
Subject: You have published copyrighted material (publisher is “bitching”)
To: info@censys.org
Cc: “Daniel Gray” <dangray35@gmail.com>
Date: Wednesday, June 2, 2010, 9:29 PM

I am really only allowed to publish 12 words, but she would graciously give me 150 if I would just limit myself to that. SO:

please do not go to this website…ever…because it really sucks

http://bayviewcompass.com

Here are some sites that don’t:

http://en.wikipedia.org/wiki/Transition_Towns

Transition Towns

From Wikipedia, the free encyclopedia

Jump to:navigation, search

Totnes, Devon: a Transition Town

Transition Towns (also known as Transition network or Transition Movement) is a movement that originates from a student project overseen by permaculture teacher Rob Hopkins at the Kinsale Further Education College in Ireland. The term “transition town” was coined by Louise Rooney[1] and Catherine Dunne. Following its start in Kinsale, Ireland it then spread to Totnes, England where Rob Hopkins and Naresh Giangrande developed the concept during 2005 and 2006.[2] The aim of this community project is to equip communities for the dual challenges of climate change and peak oil. The movement currently has member communities in a number of countries worldwide. The Transition Towns movement is an example of socioeconomic localization.

Contents

[hide]

:}

http://www.transitiontowns.org/

What is a Transition Town (or village / city / forest / island)?

Here’s how it all appears to be evolving…

It all starts off when a small collection of motivated individuals within a community come together with a shared concern: how can our community respond to the challenges, and opportunities, of Peak Oil and Climate Change?

They begin by forming an initiating group and then adopt the Transition Model (explained here at length, and in bits here and here) with the intention of engaging a significant proportion of the people in their community to kick off a Transition Initiative.

A Transition Initiative is a community (lots of examples here) working together to look Peak Oil and Climate Change squarely in the eye and address this BIG question:

“for all those aspects of life that this community needs in order to sustain itself and thrive, how do we significantly increase resilience (to mitigate the effects of Peak Oil) and drastically reduce carbon emissions (to mitigate the effects of Climate Change)?”

After going through a comprehensive and creative process of:

  • awareness raising around peak oil, climate change and the need to undertake a community lead process to rebuild resilience and reduce carbon
  • connecting with existing groups in the community
  • building bridges to local government
  • connecting with other transition initiatives
  • forming groups to look at all the key areas of life (food, energy, transport, health, heart & soul, economics & livelihoods, etc)
  • kicking off projects aimed at building people’s understanding of resilience and carbon issues and community engagement
  • eventually launching a community defined, community implemented “Energy Descent Action Plan” over a 15 to 20 year timescale

This results in a coordinated range of projects across all these areas of life that strives to rebuild the resilience we’ve lost as a result of cheap oil and reduce the community’s carbon emissions drastically.

The community also recognizes two crucial points:

  • that we used immense amounts of creativity, ingenuity and adaptability on the way up the energy upslope, and that there’s no reason for us not to do the same on the downslope
  • if we collectively plan and act early enough there’s every likelihood that we can create a way of living that’s significantly more connected, more vibrant and more in touch with our environment than the oil-addicted treadmill that we find ourselves on today.

If you want to find out more, check out the other menu items on the left hand site of the page.

Final point

Just to weave the climate change and peak oil situations together…

:}

http://www.transitionus.org/

  • Great Unleashings in Carrboro-Chapel Hill, NC, Bloomington, IN and Laguna Beach, CA!

    As part of the Transition Model, the Great Unleashing is the coming together of the people in a community to envision a positive, resilient future in response to climate change and the end of cheap oil. For many groups, the Great Unleashing marks the kick-off of working groups to start in earnest to build the community that they want to see. Here are some recaps of the Unleashing events this month across the country, with each place with its own unique flavour.

  • May Round-up of What’s Happening in the World of Transition – US Edition

    Here are some highlights of what’s keeping Transition Initiatives busy across the country and around the world…

  • Tucson takes it up a notch: Cyclovia Tucson

    In Arizona, members of Sustainable Tucson, 29th Official Transition Initiative in the US, have been collaborating with the folks planning Cyclovia for Tucson. The Inaugural Cyclovia Tucson took place on April 18th, 2010, within the comfortable traffic free city streets, public parks and areas in-and around the University of Arizona.

:}

More tomorrow

:}

So What To Do Next – Subscribe to a magazine

Boogie down brothers it’s Jam Band Friday -( http://www.youtube.com/watch?v=p-cF40OWeak )

Now that you have spent the last couple of years getting to know your energy systems in your home and doing something about it. What is next? Solar Panels, Solar water heaters, a Wind turbine? Slow down little guppy. You could even start with a solar cooker. However I suggest you read and think a little first. I mean a meditation on food and a solar cooker could take you to places you have never been.

Jobs for Energy Auditors Gain Momentum Nationwide

Cover photo: Erik Pierson of Recurve, a San Francisco Bay Area home performance contractor, discusses an upcoming home energy audit with Regina Loureiro of San Jose. Photo by Lou Dematteis

Jobs for Energy Auditors Gain Momentum Nationwide

January/February 2010 Feature

by Patricia Leiser

It is anticipated that most, if not all, large U.S. cities will adopt programs to improve the energy efficiency of homes and commercial buildings.

Continue reading “Jobs for Energy Auditors Gain Momentum Nationwide”

:}

( http://www.youtube.com/watch?v=CBjTEy5PKhs )

The more you read and research the more you will know what your next move is. My question is when does the audit end, and more importantly did the audit prompted you into other behaviors. Are you riding your bike more?

http://homepower.com/home/

Making Sense
Making Sense: of Solar-Electric System Costs
What would it cost to power your home with solar energy? Use these simple guidelines to get your solar start today.
Tools of the Wind-Electric Trade
Tools of the Wind-Electric Trade
The tools you need for a successful wind-electric installation.
Intro to Hydropower
Intro to Hydropower: Part 2: Measuring Head & Flow
Part 2. How to measure the two most important variables used in determining your site’s hydroelectric potential.
Solar Water Heating Systems Buyer's Guide
Solar Water Heating Systems Buyer’s Guide
Pick the perfect solar hot water system for your climate and site.
Be Cool
Be Cool: Natural Systems to Beat the Heat
Beat the summer heat with these basic passive cooling strategies.
EV Snapshot
EV Snapshot: Chevy S10 Conversion
A step-by-step tour of Mark’s clean, electric conversion of a Chevy S10 pickup — guaranteed to make you rethink your next vehicle. With some effort and a little money, you can convert your gasoline engine car to run on electricity—for cleaner, greener local driving.
Efficiency Details
Efficiency Details: For a Clean Energy Change
Put these top ten tips to use and make your household more energy efficient and renewables-ready.
How to Install...
How to Install… A Pole-Mounted Solar-Electric Array: Part 1
How to install a pole-mounted solar-electric array— part one, sizing and setting the pole.

:}

( http://www.youtube.com/watch?v=w22v6wkTeSM )

And for the policy wonks

http://www.iaee.org/en/publications/journal.aspx

The Quarterly Journal of the IAEE’s Energy Economics Education Foundation
Volume 31, Special Issue
Download Entire Issue Now
Papers

ADAM’s Modeling Comparison Project – Intentions and Prospects
Ottmar Edenhofer , Brigitte Knopf, Marian Leimbach and Nico Bauer
View AbstractDownload Now

The Economics of Low Stabilization: Model Comparison of Mitigation Strategies and Costs
Ottmar Edenhofer , Brigitte Knopf, Terry Barker, Lavinia Baumstark, Elie Bellevrat, Bertrand Chateau, Patrick Criqui, Morna Isaac, Alban Kitous, Socrates Kypreos, Marian Leimbach, Kai Lessmann, Bertrand Magne, Serban Scrieciu, Hal Turton, Detlef P. van Vuuren
View AbstractDownload Now
Transformation Patterns of the Worldwide Energy System – Scenarios for the Century with the POLES Model
Alban Kitous, Patrick Criqui, Elie Bellevrat and Bertrand Chateau
View AbstractDownload Now


Technology Options for Low Stabilization Pathways with MERGE
Bertrand Magne, Socrates Kypreos, and Hal Turton
View AbstractDownload Now

:}

( http://www.youtube.com/watch?v=fb0AHX6z0qQ )

And then for the strong at heart.

http://advancedhomeenergy.com/home

AHE Featured on the Cover of the Sept/Oct 2009 edition of Home Energy Magazine!AHE Featured on the Cover of the Sept/Oct 2009 Edition of Home Energy Magazine!

Energy Efficient Home Solutions

Advanced Home Energy (AHE) is the leading Home Performance contractor in the San Francisco East Bay. AHE provides expert guidance and services to home owners who want an energy efficient home and want to reduce their personal environmental impact.

Home Performance

Home performance is an energy efficiency strategy in which contractors address homes as whole systems, rather than in discrete components. Home performance contractors integrate expertise in all areas affecting home energy use; insulation, windows, heating and cooling, water heating, etc.. By integrating treatment of all factors in a home’s energy use, AHE services are solution-oriented, cost-effective, and easier for consumers to use than traditional efficiency methods.

Home Energy Audit

We provide a home energy audit to diagnose all the components of of a building. We then identify the areas for greatest potential and create a work package that is tailored to the unique issues of the home. By using our services home owners reduce their monthly utility bills, reduce their carbon footprint, and make their home more comfortable throughout the year

:}

( http://www.youtube.com/watch?v=nLq-2eo9Z6c )

Once you read this you will be ready to go gogogogo

http://www.electricenergyonline.com/

Current Issue
January/February 2010 Issue 1 • Volume14
Cover Story
  • Community Wind – the development of locally owned, utility-scale wind farms – is one of the fastest-growing segments in the U.S. wind industry. Community Wind projects are developed and owned, in part, by members of the communities in which they’re developed. A typical project ranges between 5MW and 80MW, although they can range both higher and lower. Most importantly, this approach to development leads to a genuine sense of community involvement and acceptance. [More]

:}

Nothing wrong with reading and being smart.

http://www.youtube.com/watch?v=twgL6KGQCOw

:}

Insulation – What a way to end the week

It is Jam Band Friday – ( http://www.youtube.com/watch?v=3JW-OU3LkM8 )

Humans burn at 98.6. If we lived in a perfectly insulated and airtight world we would have to vent our homes in the winter. Some people in colder climates have those homes, but us’ens in the uninsulated leaky drafty Midwest don’t. I tell people to put as much insulation WHEREVER they can.

( http://www.youtube.com/watch?v=G6x8GGXrCFQ )

These people favor fiberglass and are trying to dis’ cellulose:

http://www.naima.org/pages/resources/faq/faq_home.html

FAQs About Residential and Commerical Insulation

What does insulation actually do for my home?

What areas of my home should be insulated?

How do I know how much insulation I need for my home?

What is R-value?

Where do I find R-value information when I go to buy insulation?

What are the options when choosing insulation?

How can I be sure I’m getting the best performance from the insulation in my home?

Are there rebates available for installing insulation?

If I am adding more insulation to my home do I need to remove what I already have?

What Kind of Insulation Do Builders Use on Their Own Homes?


What does insulation actually do for my home?

Fiber glass insulation keeps your home cool in the summer and warm in the winter, because insulation resists the flow of heat. Heat is a form of energy and always seeks a cooler area – flowing out of the home in the winter and into the home in the summer. By reducing heat flow, a properly insulated home uses less energy for heating and cooling.

In addition to being an energy saver, fiber glass insulation also acts as a sound absorber. When installed in walls and ceilings, it can reduce the transmission of sound from one room to another or from the outside. In today’s noise-laden environments, more and more homeowners are soundproofing their homes.

A well-insulated home increases the overall comfort of the home and adds to its resale value. Whether your home is new or old, it pays to insulate.

What areas of my home should be insulated?

Insulation is not just for attics and outside walls. Insulation should also be installed in other areas of your home such as ceilings with unheated spaces, basement walls, floors above vented crawl spaces, cathedral ceilings, floors over unheated garages or porches, knee walls, and in between interior walls (especially bathrooms), ceilings or floors for extra sound control.

How do I know how much insulation I need for my home?

The amount of insulation in a home varies depending upon where you live. NAIMA has developed recommended levels of insulation for various climate zones. These recommendations are based on recommendations from the U.S. Department of Energy (DOE) and the International Energy Conservation Code which is the model building code for the United States.

Click here to visit SimplyInsulate.com to learn about what zone your home is in and how much you insulation you need.

What is R-value?

Insulation is identified and labeled by R-value. “R” stands for resistance to heat flow. The higher the R-value, the greater the insulating power.

Where do I find R-value information when I go to buy insulation?

Insulation is identified and labeled by R-value. “R” stands for resistance to heat flow. The higher the R-value, the greater the insulating power. Manufacturers of insulation products print R-values of their products either on the bags or on the labels. In most cases, R-values are also printed on the facings of fiber glass batts and rolls.

:}

( http://www.youtube.com/watch?v=BJCTrolF3CY )

You can use just about anything as insulation.

http://oee.nrcan.gc.ca/residential/personal/new-home-improvement/choosing/insulation-sealing/materials/khi-insulation.cfm?attr=4

The Proper Choice of Insulation

The proper choice of insulation depends on its final use. In most applications, good resistance to heat flow is not the only thing you will have to consider. In specific situations, insulation may also need some of the following properties:

  • resistance to high temperatures
  • resistance to moisture flow (can it reduce the movement of water vapour?)
  • resistance to air movement (can it act as an air barrier?)
  • a fire-rated protective covering

Once you have matched the material properties with the specific application, consider the following installation factors:

  • Is it relatively easy to install?
  • Is it the best buy for the space available (either high insulating value per dollar if you have lots of open space, or high insulating value per thickness if space is restricted)?
  • Is it available locally?
  • Will it be easy to install the insulation to fill the space completely?
  • Can it conform to surface irregularities?
  • Is it rigid enough to provide support for finished materials or resist pressures against its surfaces?
  • Does one insulation require more accessory products than another (fire protection, framing, air and vapour barrier)?

In short, the choice of insulation will largely depend on how it will be used. Different types of insulation are commonly used for insulating wallsbasements and attics. Fortunately, particular insulation jobs will quickly eliminate some materials, making the choice much easier.

:}

( http://www.youtube.com/watch?v=gZ_kez7WVUU )

Batt or Blanket Insulation

Loose-Fill Insulation

Mineral Fibre

Cellulose Fibre

Glass Fibre

Mineral Wool (Slag and Rock Wool)

Vermiculite

Rigid Board Insulation

Glass-Fibre Boards

Expanded Polystyrene

Extruded Polystyrene

Polyurethane and Polyisocyanurate Boards

Phenolic Foam Boards

Spray-Foam Insulation

Polyurethane Foam

Semi-Flexible Isocyanurate Plastic Foam

Phenolic Foam

( http://www.youtube.com/user/thepurplechannel?blend=1&ob=4#p/u/2/1Xm4os2ugaA )

:}

Just copying all the types of insulation tuckered me out.

( http://www.youtube.com/user/thepurplechannel?blend=1&ob=4#p/u/3/wok0fV4Fp7w )

:}

Hot Water Blankets – Stop the presses I made a mistake

When I was talking about making a list of your energy consuming equipment and taking actions like cleaning the coils on your refrigerator and your freezer, and  cleaning the filters on your cooling and heating equipment, I forgot the most easy and largest savings step. That would be your hot water heater. Like the other equipment you do need to clean it. So listen to the plumbing guy about cleaning your gas or electric water heater. They are different:

Electric

http://www.youtube.com/watch?v=_GERpIx_QLo

Gas

http://www.ehow.com/video_4872205_clean-out-gas-hot-water.html

So was that fun or what. If you ended up with water allllllll over your basement floor, practice makes perfect. Now it is time to put on another layer of insulation. How much is up to you but R 60 is probably too much.

http://www.stretcher.com/stories/970127c.cfm

First turn your water heater thermostat to 120 no matter what this guy tells you 140 is too high unless you are a family of 5.

Most of us received our first introduction to the hot water heater blanket back in the ’70’s when conserving energy became important. They became a familiar addition to many homes. But how effective are they really? And can a heater blanket actually pay for itself if the hot water heater is in a part of the house that’s not subject to extreme weather? Let’s see if we can find out.

First, a little bit about water heaters and insulating blankets. A hot water heater is just a tank of water that’s heated to a preset temperature (generally about 140 degrees F.). When you use hot water it’s drawn from the tank and new cold water replaces it. Regardless of whether any water is used it takes energy to keep the water hot. Energy is always escaping to the colder air that surrounds the tank.

Almost all heaters have at least some minimal level of insulation to help keep the heat inside the tank. Newer models, especially those built in the last ten years, have more insulation than older models.

A water heater blanket is made of insulation contained in sheet plastic so that it can be attached to the water heater. Blankets are rated based on their ‘R’ value just like other insulation. A blanket with R-11 is recommended.

The blankets are easy to install. The only tools you’ll need are a razor knife and a tape measure. The cost is fairly modest with most running between $10 and $25.

How effective are they at reducing energy costs? The Iowa Energy Center says that a properly installed blanket can reduce energy loss by 25% to 45%. If you consider that Florida Power and Light estimates that the average family of four spends $25 each month for hot water that can be quite some savings. That’s not to say that you’ll save 25% of $25 each month. You’ll still need to heat water to replace the hot water in that shower. But a hot water blanket will pay for itself in short order.

Now let’s try to get specific about Joyce’s question. Does it still pay to install a blanket if your water heater is kept in the garage? How can you tell?

Begin by checking the owner’s manual for your water heater. Some newer models specifically recommend that you do NOT use a heater blanket. If your manual doesn’t mention blankets or you’ve lost the manual (someone please tell me that I’m not the only homeowner who doesn’t have his manual!) there’s a simple test you can do. Just place your hand on the outside of the heater. If it’s warm to your touch a blanket will save you money.

Is it possible to calculate how much money you’ll save? Well, theoretically yes. But unless you’re related to a grad student in advanced mathematics it’s probably not worth the effort. There are quite a few variables that will effect the answer. How much you pay for energy. How quickly your heater loses temperature. How efficient your water heater is in turning energy into hot water. How much hot water your family uses. Are there periods during the day when no water is being used? Remember, we’re only talking about an investment of $25 or less. We really don’t need sophisticated payback analysis here!

But what about Joyce’s question? We still haven’t answered it. Fortunately, there is a simple way to address it. If you can feel the heat with your hand it’s wise to install a blanket no matter what the surrounding air temperature is.

Look at it this way. Suppose you keep the tank in an unheated area that’s exposed to outside temperatures. The water tank is being heated to 140 degrees. It’s 20 degrees outside. That’s a difference of 120 degrees. Unless that tank is properly insulated you’d expect to lose some heat.

What about if you have the heater in a attached garage like Joyce? It’s probably not unreasonable to guess that the temperature drops to 60 degrees in the garage. That means that there’s still a difference of 80 degrees between the tank and the air surrounding it.

So if you saved the 25% with the heater outside, you could expect to still save 2/3 of that with the heater in the garage. (80 degrees divided by 120 degrees = 2/3) Well worth the time and money you’ll spend on installing a heater blanket.

One warning that we do need to pass along. DO NOT insulate the bottom or top of gas hot water heater tanks. You need to leave plenty of room for the pilot light and for the flue draft. Be very careful to follow installation instructions. Failure to do so could be very costly and dangerous!

In addition to water heater blankets, there are other things that you can do to reduce the costs of that hot shower. You can insulate the hot water pipes. Lowering the tank temperature is another option. Many people have installed timers and low flow shower heads. If you have an electric tank and it’s in the basement you might even want to place it on a Styrofoam pad to reduce the heat lost to the cold floor.

The bottom line is that water heater blankets are inexpensive, easy to install and efficient. You don’t need to be that family of four spending $300 each year for hot water the savings can add up. It’s an easy way to stretch a few dollars for something more important!

http://www.energysavers.gov/your_home/water_heating/index.cfm/mytopic=13070

http://www.google.com/products/catalog?hl=en&source=hp&q=water+heater+blanket&oq=&um=1&ie=UTF-8&cid=3885595677729203527&ei=X3d9S_qbDpKSNqDK_N0K&sa=X&oi=product_catalog_result&ct=result&resnum=1&ved=0CBQQ8wIwAA#ps-sellers

:}

Notice what he said about insulation for the hot water line. They make slit foam cuffs that just slip over your warm water pipes. If you kitchen sink is a long way from your heater, (mine is 40 feet) it can take forever to get hot water and if you turn it off for very long you are back to cold again.

:}

Awnings For Doors And Windows – Solar Shading

Much of the common sense that was built into our homes up until the 1950s was thrown out for what was called modernism. We here call it 20 year obsolescence and stupid. One of those Common Sense ideas was the idea of solar shading. This meant that for most parts of the temperate US all the houses would have roughly 2 or 3 foot eves. The idea being that you want the Sun during the winter and you don’t want it in the summer. Since most houses no longer have such eves and especially in the south where your eves would have to be 5 foot long, awnings have gotten popular. In Springfield IL for instance:

http://www.benmarremodeling-il.com/

Benmar Remodeling & Building Corporation

(217) 814-0278 Our goal is not to be the biggest, but rather, the best! 929 E Carpenter, Springfield, IL 62702

In addition to renovating, designing or remodeling your outdoor spaces, we offer a large selection of awnings by several different manufacturers. Choose from a variety of styles and materials, including:

• Aluminum patio covers & pergolas
• Fabric
• Fiberglass
• Retractable fabric awnings
• Retractable – manual or motorized
• Stationary

We also sell and install Joyce windows, which are all welded, rigid vinyl construction and are extremely energy efficient. All styles are custom sized and have detailed contoured framing for an elegant “wood-like” look, all the while creating shadow lines in the main frame sash that mimic real wood windows. You really have to see them to believe how beautiful they are!

:}

http://www.cheapawnings.com/

Retractable Patio Awnings
Welcome to CheapAwnings.com!
Don’t let the name fool you! We offer high quality, do-it-yourself awnings, canopies, hurricane shutters and umbrellas at reasonable prices with FREE ground shipping.
Convenient On-Line Shopping and Ordering
Phone (800) 422-6827 ext. 278

Canvas AwningsCanvas Awnings
View our collection of high quality and affordable Stationary Canvas Window and Door Awnings for your home or office. Custom order your awning or canopy from our available line of fabric awning colors and available sizes.

Metal AwningsMetal Awnings
Choose from our distinct line of outdoor Metal Awnings and Metal Canopies. These rigid metal window awnings and metal door canopies are ideal for enhancing exterior looks and protection from the elements.

:}

http://www.awninginfo.com/


Welcome to the Professional Awning Manufacturers Association (PAMA) Web Site – your first source for awning information. Learn about the benefits and energy savings of awnings, view awning designs, contact one of over 300 professional awning manufacturers who are PAMA members. If you are an awning company or a supplier to the industry, find out how membership benefits you by clicking on About PAMA! Enjoy your visit.

View Membership Advantage Video

Be part of the most exciting promotion ever attempted by IFAI/PAMA. Bring customers to your door by becoming a PAMA member. All PAMA members are included in the Awning Consumer Awareness Campaign. As an awning fabricator or industry supplier you can be part of this exciting initiative to educate millions of consumers about awnings and awning benefits. The campaign has already reached over 2 billion readers through publications, web sites and blogs. Join PAMA now to get in on this awning industry initiative to drive residential customers to your business, directly or through your customers. Join PAMA now.
VideosHow to Protect Your Pet from Sun & Heat

Awnings Today Awnings and Energy Savings ? Awning Benefits See how awnings help reduce energy usage, and how awnings can expand living space, protect from UV Rays and beautify the home exterior. The video features an interview with John Carmody, Director of the Center for Sustainable Building Research at the University of Minnesota, discussing the Awning Energy Study, Awnings in Residential Buildings: The Impact on Energy Use and Peak Demand.

The video also features PAMA Member, Gary Buermann of G & J Awning discussing the benefits of using awnings on the home, and some of the attractive features of modern awnings including a wide selection of fabrics and remote controls.

Buying Awnings: A Homeowner’s Purchase from Start to Finish

:}

There you have it from the professionals

:}

Last Post On Windows – For this meditation on home energy improvements

Windows and Doors in your residence are the fine line between Rehabilitation and New Build. To use Professional Speak, your house consists of an interior and an exterior envelop with insulation inbetween even if that insulation is only air. The whole goal of energy rehabs is to dramatically tighten both the interior and the exterior of the house and then increase the insulation where possible. This is a separate issue in a way from the energy consumption in the house itself. So when you get to the parts that move…eg windows and doors that is where the expense can climb rapidly. If you are a home owner, new windows and doors make sense BUT once you open the cavities shouldn’t you check the insulation and what about upgrading the wiring? Why not tear the whole thing down and start again? HMMMM

So if you are interested in new here are all the usual suspects:

https://web.pella.com/supportcenter/Pages/Consultation.aspx/?Network=Google&Campaign=Champaign_722:{keyword:defaulttext}:P&Branch=Champaign+Local&gclid=CMnLu5–958CFRk45wodfk3tXA&sissr=1

http://www.searshomeimprovements.com/productoffer1.aspx?o=3&t=1482&gclid&OVMTC=Phrase&site=&creative=3524009401&OVKEY=windows%20and%20doors&gclid=CI62jcO-958CFdKO5wodhgaaYA

http://installation.homedepot.com/windows/google/index.html?cm_mmc=SEM|RPM|HS_Windows|GGL_8152

http://www.andersenwindows.com/

:}

For a lot cheaper you can get low e-films that will keep the heat in during the winter and out during the summer. You have to decide how far you go.

http://planetgreen.discovery.com/home-garden/low-e-window-film.html

Green Your Home for Winter: Apply Low-E Window Film

Jasmin Malik Chua, Jersey City, USA

Jasmin Malik Chua
By Jasmin Malik Chua
Jersey City, NJ, USA | Sun Mar 23, 2008 01:21 PM ET

If you haven’t socked away enough money for new, energy-efficient windows-or you’re a renter who doesn’t have the latitude to make major home improvements-consider applying one of several types of window film to your panes for instant energy savings.

A plastic film with low-emissivity (low-E) coating, which can reduce heat loss through old windows by 30 percent to 50 percent, provides a thin metallic coat the blocks off heat and ultraviolet rays. Apply the low-E film to the inside pane of your window to trap heat indoors in the winter. When the mercury begins to rise, flip the film over to the outside pane to keep the sun’s heat out of your domicile. Plus, according to Lowe’s, insulating window films will pay for themselves in less than a year in reduced utility bills.Do-it-yourself window film is available in rolls or in precut kits, but you might want to consult the professionals on very large windows. Here are some companies that manufacture energy-saving window films:

1. Bekaert

2. CP Films

3. Film Technologies

4. Madico

5. Plastic View International

[Via ::The Daily Green]

Difficulty level: Easy to moderate

:}

My brother tried it in Las Vegas and they dropped the temperature a lot. To summarize we have covered windows and door from shutters, to new windows and doors to films and sprays for windows and doors. The final step tomorrow is to deal with awnings. Isn’t the green economy fun!

:}