What Your House Should Have Looked Like In The First Place – Last day of residential efficiency meditation

It’s Jam Band Friday – http://www.youtube.com/watch?v=4Gpdz8INFBg

So we end this meditation where we have been for 3 days on building a house that does what it should, make your life cheap and comfortable. This all started with an Energy Audit. Could that get you to build a better home in the future? Sure it could. It just depends on how important the planet Earth is to you. It is very important to me. Other people think of it as their personal toilet.

http://www.fastcompany.com/blog/kit-eaton/technomix/your-future-homes-roof-will-be-eco-friendly-too

Your Future Home’s Roof Will Be Eco-Friendly Too

BY Kit EatonFri Oct 9, 2009

Scientists at MIT have invented a smart roofing material that takes a new thermal-management approach to eco-design. It’s a different approach to previous efforts, of which there are many. We’ve rounded them up for you, starting with the latest, below.

thermeleon

MIT’s Black and White Solution

MIT’s Thermeleon material is a composite of layers that makes it thermochromic–on exposure to heat it changes color from black to white. It works by sandwiching a common polymer between flexible plastic layers, with a black one at the back–when cold the polymer solution stays dissolved and the black rear face shows through, and when it heats up the solution condenses to form light-scattering droplets.

The upshot is that when the sun is shining a roof tile covered in the material is white-colored, scattering up to 80% of the sunlight back and thus keeping the building beneath the roof cooler. The result is a 20% reduction in cost to keep the interior at a comfortable temperature in the summer, a figure which also comes with an eco-friendly drop in the electricity supply demands. During winter, of course, you’d prefer your roof to capture as much heat as possible from the sun, which is where the black coloring is handy–the tiles scatter just 30% of incoming solar radiation then.

The team’s working on micro-encapsulating the chemicals, so that in future they may work as a paintable or spray-on coating, and then if the prices drop to match the innovation, the tech could also find much use in the developing world

:}

( http://www.youtube.com/watch?v=hs8HcICxzAU&feature=related )

Why haven’t we done things like this for years:

Dow Chemicals’ Covert Solar Tiles

If your house design calls for a shingled roof instead of a tiled one, and you live in an area where theft of expensive roof-top solar panels is a problem, then Dow Chemicals has a neat trick.

Its Solar Shingles use thin-film copper indium gallium diselenide technology to make them cheap and light, and they’re designed to be intermingled with traditional asphalt roof tiles on a roof. That makes for easy installation, and lower visibility to street-level thieves.

solar roof shingles

And there you have it: Proof positive that in the future, our building roofing will do much more for us than keeping the sun, wind, and rain off our heads. They all make good sense, of course, since traditional roofs spend all their time staring at the sun rather than harnessing its rays for energy. Now if there were only a clever hybrid of all these different ideas…

:}

With credits to:

http://www.physorg.com/news174209373.html

and

http://www.physorg.com/news174209373.html

:}

( http://www.youtube.com/watch?v=QQyt_xy2mMQ&feature=related )

Then there is the really far out stuff:

http://www.telegraph.co.uk/earth/earthnews/3351863/Eco-tree-houses-the-homes-of-the-future.html

Eco tree houses – the homes of the future

By Louise Gray, Environment Correspondent
Published: 5:00PM BST 16 Sep 2008

A model of the proposed tree house (left) and an illustration of how one might look (click to enlarge)

Tree houses grown specifically for modern living could be the eco-homes of the future.

Scientists from the US and Israel have developed the trees that can be shaped into the structure of innovative homes.

The ingenious tree houses naturally provide shade and can also be used to process waste and reduce carbon emissions.

The researchers at Tel Aviv University and a branch of the Massachusetts Institute of Technology are confident the first prototype home could be ready in just ten years.

Plantware, the organisation behind the technology, have already built bus-shelters, park benches and traffic lights using the advanced techniques of airoponics, where plants are grown without soil.

Now they have built a model for a tree house to be used in cities.

The extraordinary structure is build from actual tree roots that are grown to be mallable and then hardened into a structure like steel girders. The houses can be equipped with solar panels and wind turbines to generate electricity and even convert human waste into valuable nutrient for the living tree.

Different species of trees could be chosen for different environments so for example, willows could be used in England and giant American redwoods in California.

However at the moment the tree homes would be prohibitively expensive to all but a few.

:}

( http://www.youtube.com/watch?v=tqUTB5bflCM&feature=related )

This is a really long article so I will get you started and list the 3 architects. Watch out the prices will kill you, but you can do the same things without the expense.

http://property.timesonline.co.uk/tol/life_and_style/property/new_homes/article3203472.ece

From The Sunday Times
January 20, 2008

Building the future: eco-architecture

Home gave three leading eco-architects different budgets and one brief: to create a sustainable urban family dwelling. Our correspondent is impressed by the result

Brooke Coombes House

So, you want a stylish green home, but think it will cost the earth? Think again. Home asked three leading exponents of sustainable design to come up with the ultimate green new-build house to suit three very different budgets – and the results were spectacular.

All had the same brief: to design a home for a young part-time teacher and her husband, an IT specialist. The imaginary couple have two children, aged nine and seven, and own an end-of-terrace plot on a tree-lined street of Victorian houses. The house can’t be taller than neighbouring three-storey homes, and must be as green as possible.

Dan Burr, 40, an associate partner at Sheppard Robson, which has offices in London and Manchester, has come up with a three-bedroom, 1,500 sq ft home costing £250,000 (plus land costs). Burr was the design director on Britain’s first zero-carbon house, the Lighthouse, built in Watford last year. The building meets level 6 of the Code for Sustainable Homes, with which all new homes in Britain will have to comply by 2016.

Justin Bere, 48, principal of the north London-based firm Bere Architects, designed a four-bedroom, 1,800 sq ft home costing £400,000 (plus land costs). His residential projects include Focus House, built in 2006 in Finsbury Park, north London, which won the Riba London Region Award 2007, among other prizes. His practice is a devotee of PassivHaus, an established German style of energy-efficient construction.

The third property is a five-bedroom, 2,500 sq ft home costing £600,000, designed by the husband-and-wife team Catherine Burd and Buddy Haward, both 41. Based in northwest London, they devised the low-energy Brooke Coombes House, in Ealing, west London, which in 2002 won the Riba Manser Medal, and are designing 600 sustainable homes in the Rochester Riverside scheme at Thames Gateway.

Their EZ House has three key principles: its construction must incorporate local materials from sustainable sources and low-energy build methods; it must consume little or no energy, so conserve or generate it on site; and the flexible design must have non-load-bearing internal walls, so that it can be adapted to the changing needs of the occupants

The sectional house
£250,000

Sheppard Robson: 020 7504 1779, www.sheppardrobson.com

The PassivHaus
£400,000

bere:architects: 020 7837 9333, www.bere.co.uk

The EZ House
£600,000

Burd Haward: 020 7722 0788, www.burdhaward.com

:}

Next week I go back to the environment. So much has been happening on the energy and the environment front that I have been dieing to print but…well meditations go where ever they will.

http://www.youtube.com/watch?v=u7pHo9amiZY&feature=related

:}

Where An Energy Audit Can Lead – We started this meditation on caulk and CFL’s

[we are coming up on Herbie Hancock’s 70th birthday so..]

It’s Jam Band Friday – ( http://www.youtube.com/watch?v=XrgP1u5YWEg )

But the discussion leads directly to considering the use of you own generation devices. People have been trained over the years to “pay their energy bills as they go”. What if you paid your energy bill before you used it. Electricity is not a commodity and energy services are your birthright. OoopS there I go again getting all radical. But it is not radical to be thrifty. It is not radical to be kind to the Earth. It is not radical to teach your kids sustainable practices. The internal combustion Engine is primitive and must be gotten away from. The days when we could just burn large amounts of “stuff” and consume large amounts of “stuff” are over, whether we like it or not…anyway here’s some solar POWER…

http://www.andalaysolar.com/cm/Home.html

Introducing Andalay AC

The First Plug and Play Solar Power System

ANDALAY AC – GET THE WHITEPAPER! SEE THE INSTALLATION VIDEO!
Built in Reliability & Safety Solar systems must last decades in the harsh environment of your roof. But years of sun, wind and rain can corrode the different metals and eat through unprotected wiring found on ordinary solar systems. Both lead to a failed investment.

Andalay, the next generation in solar power systems, engineered away these flaws with its award-winning revolutionary design. Protected wiring, assembly in a quality-controlled factory environment, and superior framing, grounding and wiring deliver a system that is built to provide decades of reliable solar power performance. Learn More » Maximum Lifetime Performance With Enphase micro-inverters built right into each panel, Andalay delivers decades of powerful performance. Unlike ordinary solar panels where their power production varies from hour to hour, each Andalay panel consistently operates at its maximum power potential. Additionally, these revolutionary panels continue to operate at maximum power even if one panel goes down compared to ordinary panels where the malfunction of one panel from shading or other failures takes down all of the panels. As a result, these revolutionary panels can perform 5% to 25% higher than ordinary panels. Learn More » Beautiful Appearance on your Roof In addition to its unparallel reliability, Andalay’s award winning design showcases a sleek, beautiful, design that compliments your home. With 80% less parts and fewer penetrations to your roof, Andalay’s slimmer panels, invisible electrical cabling and hidden mounting system take up less room on your roof while showing off a revolutionary design. The end result is an attractive system that ends electricity bills and fights green house gas. Learn More »

:}

( http://www.youtube.com/watch?v=0hmVHhH96es )

http://www.amerescosolar.com/SolarSite/SolarSiteMain.aspx?tsid=googleppc&gclid=CMrFjcKgoqACFQMhDQodkylFag

Solar electric power, known as photovoltaic (PV) technology, makes use of the abundant energy from the sun. It can be used in a wide range of products, from small consumer items to large commercial solar electric systems.

Few power-generation technologies have as little impact on the environment as solar power.
It quietly generates electricity from light and produces no air pollution or hazardous waste.
It doesn’t require liquid or gaseous fuels to be transported or combusted. And because its energy source—sunlight—is free and abundant, it can guarantee access to electric power.
Learn More

:}

( http://www.youtube.com/watch?v=jo5GcYeh7XA )

http://www.solarliving.org/display.asp?catid=49

SLI: On-site and Online Solar Training and Certification
Promoting Sustainable Living through Inspirational Environmental Education

About Us
Workshops
Online Workshops
Solar Living Center
Other Programs
Shop
Internships
Support Us
Resources
First Name

Last Name

Address

Address2

City

State

Zip

Email

Country



HomeAbout Us

About Us

Established in 1998 as a spin-off from Real Goods Trading Company, the Solar Living Institute in Hopland, CA, is a 501(c)(3) non-profit educational organization whose mission is to promote sustainable living through inspirational environmental education. The Institute provides practical, education by example and hands-on workshops on renewable energy, green building, sustainable living, permaculture, organic gardening and alternative, environmental, construction methods.

The Institute is headquartered at the Solar Living Center, a gorgeous 12-acre renewable energy and sustainable living demonstration site visited by nearly 200,000 people annually in the heart of Northern California’s wine country in Hopland, California. Since its inception nearly two million visitors have experienced the Solar Living Center.

The nonprofit Solar Living Institute depends upon your support to continue to offer you rich educational programs. Please support the Institute by joining our Membership Program, making a gift online, becoming an intern, or volunteering.

Newsletters 2010
Our Mission
Staff & Board
History of SLI
FAQ
Employment
Contact Us

:}

( http://www.youtube.com/watch?v=c6WrK7m4ZPk&feature=related )

http://www.affordable-solar.com/residential.solar.home.htm

Residential Solar

Affordable Solar takes you through the process of powering your home with solar. One-stop and turn-key, we do it all for you.

Solar 101

Learn the Basics

System Sizer

Enter your information and find your system and cost.

GT Kits

Go here to buy pre-packaged kits.

Installer Network

View our map of residential solar installers.

How It Works


Learn more about how solar works in Solar 101.

Example Systems


Example systems that are currently up and running.

Residential Solar

There are many terms for Residential Solar Energy System such as Grid-Tie (tied into the energy grid), Residential Solar, and Home Solar, but they are all the same thing: a solar electric system that provides clean and renewable power from the sun.

:}

Happy Birthday

http://www.youtube.com/watch?v=ZMqvDV-lYVc&feature=related

:}

Commercially Sold Solar Water Heaters – If we all heated water this way our burning behavior could be cut in half

I mean I am talking world wide. If every women in the world heated water this way their lives would immediately improve and their effects on the environment would come to a stop. They probably would even live better lives. Every bride should demand one.

http://www.radiantsolar.com/solar_options.php?gclid=CLXv0KCWnaACFQvyDAodrxs6Xw

Solar Options

Here are some of the things that a solar heating system can do for you:

SOLAR DOMESTIC WATER HEATING

kids in a tub of domestic hot water The production of domestic hot water is one of the most beneficial and cost effective uses of thermal solar collectors. Many people would be surprised to learn how much energy and environmental impact is required for this use. Water has a “polar” molecular structure and for that reason it requires an unusual amount of energy to change its temperature. In fact, the “heat capacity” of water is about 4 times that of concrete or cast iron. It is a “year around” function that rounds out other seasonal or intermittent solar applications and improves the cost benefit or investment value of the solar heating system. In many places, solar domestic water heaters are eligible for tax credits. We include the domestic hot water heating element in nearly everything we do because it addresses important mechanical issues such as summertime heat control and heat dumping.

:}

http://www.solardirect.com/swh/swh.htm

Passive Solar Water Heater Active Solar Water Heater Trendsetter Solar Water Heater
Warm Climate
ProgressivTube
• Solar Hot Water Passive
system
• Easy to install and
maintain; no moving
parts
• Storage tank must be
installed above or close
to collector
• Uses no electricity; will
function during
blackouts
• Price range:
$1,700.00 – $2,600.00
Moderate Climate
Helio-Pak
• Active Solar Hot Water,
flat plate type
• Pumps, valves &
controllers assist in the
prevention of freezing
• Tanks do not need to
be installed above or
close to collectors
• Uses electricity; will not
function during
blackouts
• Price range:
$2,200.00 – $5,200.00
Cold Climate
TrendSetter
• Solar Hot Water Active,
evacuated tube
• Heavy-duty residential
and commercial
• Additional applications:
Water heating, Radiant
floor heating, Space
Heat
• Price range:
$6,000.00 – $17,000.00

:}

These people are a lot of fun. They been at it for 31 years.

Solarroofs Solar Water Heating Collectors, Commercial & Residential

Welcome to SolarRoofs.com!
solar water heating, solar water heater, solar hot water
Welcome to SolarRoofs.com Inc.
Manufacturer of Easy, Attractive and Affordable

Skyline Solar Water Heaters
We are Dedicated to Making Quality, High Performance Solar Water Heaters that are Easier and Safer to Install. Skyline Collectors Feature 26 Architectural Trim Colors.

Using energy from the sun to heat water is one of the oldest uses of solar energy! Today, millions of homes and businesses around the globe use solar water heating systems because they are so cost effective!

Solar water heating produces energy at 1/3 to 1/4 the cost of Solar Electric (PV). Solar hot water systems are a perfect complement to a PV system and make your solar investment more cost effective. With 30% Federal Tax Credit and other State and Utility incentives, now is the time for you to Harness The Sun for your share of FREE solar energy!

Solar water heaters are the most cost effective way to reduce carbon emissions and reduce dependence on imported energy.

line Please see our GOING SOLAR page to learn more!


We provide extensive Sales Support via our toll free number:

(888) 801-9060

or Email us via our

Contact Page

l

Please Visit our

ONLINE STORE

For Great Values!
l
We look forward to helping you Find a Dealer, Place an Order, or Design your Solar Thermal System!

Extreme Home Makeover with SolarRoofs.com

extreme makeover home edition We have a 31 Year Passion For
Solar Water Heating!

Our Patented Solar Hot Water Collectors have appeared on:
ABC’s Extreme Makeover – Home Edition, History Channel’s
Modern Marvels & Di

:}

I Was Gona Do Another Post On Solar Water Heaters – The commercially available ones complete with installation

I was going to include a rant here:

That Americans have been brainwashed to believe that  energy isn’t free. The point being that if all we allowed was renewables that is all we would have. If we mandated geothermal and solar water heating for residential then in 20 years most of America would be off the grid. But powerful mining operations employing 1000s of people and powerful oil interests employing 10s of 1000s of people are never going to allow that, let alone the utility industry which employs millions of people. Then I ran across this article on PeakOIL and I thought isn’t this a much better way to put it…more on solar water heaters tomorrow.

(This was my original lead in march with the below citation for an obscure publication that ran an interesting article about the transition movement in Milwaukee of all places. I am not even sure I like the town that much..But after a nasty interaction with the editor I have taken that piece down completely…..June, note DN)

According to this dreadful woman:

From: Katherine Keller <editor@bayviewcompass.com>
Subject: You have published copyrighted material (publisher is “bitching”)
To: info@censys.org
Cc: “Daniel Gray” <dangray35@gmail.com>
Date: Wednesday, June 2, 2010, 9:29 PM

I am really only allowed to publish 12 words, but she would graciously give me 150 if I would just limit myself to that. SO:

please do not go to this website…ever…because it really sucks

http://bayviewcompass.com

Here are some sites that don’t:

http://en.wikipedia.org/wiki/Transition_Towns

Transition Towns

From Wikipedia, the free encyclopedia

Jump to:navigation, search

Totnes, Devon: a Transition Town

Transition Towns (also known as Transition network or Transition Movement) is a movement that originates from a student project overseen by permaculture teacher Rob Hopkins at the Kinsale Further Education College in Ireland. The term “transition town” was coined by Louise Rooney[1] and Catherine Dunne. Following its start in Kinsale, Ireland it then spread to Totnes, England where Rob Hopkins and Naresh Giangrande developed the concept during 2005 and 2006.[2] The aim of this community project is to equip communities for the dual challenges of climate change and peak oil. The movement currently has member communities in a number of countries worldwide. The Transition Towns movement is an example of socioeconomic localization.

Contents

[hide]

:}

http://www.transitiontowns.org/

What is a Transition Town (or village / city / forest / island)?

Here’s how it all appears to be evolving…

It all starts off when a small collection of motivated individuals within a community come together with a shared concern: how can our community respond to the challenges, and opportunities, of Peak Oil and Climate Change?

They begin by forming an initiating group and then adopt the Transition Model (explained here at length, and in bits here and here) with the intention of engaging a significant proportion of the people in their community to kick off a Transition Initiative.

A Transition Initiative is a community (lots of examples here) working together to look Peak Oil and Climate Change squarely in the eye and address this BIG question:

“for all those aspects of life that this community needs in order to sustain itself and thrive, how do we significantly increase resilience (to mitigate the effects of Peak Oil) and drastically reduce carbon emissions (to mitigate the effects of Climate Change)?”

After going through a comprehensive and creative process of:

  • awareness raising around peak oil, climate change and the need to undertake a community lead process to rebuild resilience and reduce carbon
  • connecting with existing groups in the community
  • building bridges to local government
  • connecting with other transition initiatives
  • forming groups to look at all the key areas of life (food, energy, transport, health, heart & soul, economics & livelihoods, etc)
  • kicking off projects aimed at building people’s understanding of resilience and carbon issues and community engagement
  • eventually launching a community defined, community implemented “Energy Descent Action Plan” over a 15 to 20 year timescale

This results in a coordinated range of projects across all these areas of life that strives to rebuild the resilience we’ve lost as a result of cheap oil and reduce the community’s carbon emissions drastically.

The community also recognizes two crucial points:

  • that we used immense amounts of creativity, ingenuity and adaptability on the way up the energy upslope, and that there’s no reason for us not to do the same on the downslope
  • if we collectively plan and act early enough there’s every likelihood that we can create a way of living that’s significantly more connected, more vibrant and more in touch with our environment than the oil-addicted treadmill that we find ourselves on today.

If you want to find out more, check out the other menu items on the left hand site of the page.

Final point

Just to weave the climate change and peak oil situations together…

:}

http://www.transitionus.org/

  • Great Unleashings in Carrboro-Chapel Hill, NC, Bloomington, IN and Laguna Beach, CA!

    As part of the Transition Model, the Great Unleashing is the coming together of the people in a community to envision a positive, resilient future in response to climate change and the end of cheap oil. For many groups, the Great Unleashing marks the kick-off of working groups to start in earnest to build the community that they want to see. Here are some recaps of the Unleashing events this month across the country, with each place with its own unique flavour.

  • May Round-up of What’s Happening in the World of Transition – US Edition

    Here are some highlights of what’s keeping Transition Initiatives busy across the country and around the world…

  • Tucson takes it up a notch: Cyclovia Tucson

    In Arizona, members of Sustainable Tucson, 29th Official Transition Initiative in the US, have been collaborating with the folks planning Cyclovia for Tucson. The Inaugural Cyclovia Tucson took place on April 18th, 2010, within the comfortable traffic free city streets, public parks and areas in-and around the University of Arizona.

:}

More tomorrow

:}

Reusable Furnace Filters And Foam Insulation Pads For Electrical Outlets

While these are 2 things you will hardly ever hear about and probably won’t find them in any energy audit permanent furnace filters and foam insulation for electrical outlets are cheap easy additions to your environment. You will also notice that I have managed to discuss this whole topic of residential energy conservation withoutmentioning PAYBACK. The reason for that is I don’t believe in it. If you want to save energy/money, you will. If you do not then you won’t.

Professionals (gag and puke) will say rational sounding things like – Payback calculations allow consumers to prioritize their energy purchases. OR the equally obnoxious – If it takes more then 5 years to payback consumers won’t make the purchase. This is bullcrap, I know people who have wind turbines in their backyard. People who want to save WILL

Having said all that, both of these items payback are calculated in DAYS.

http://www.airfilterusa.com/residential-air-filters/electrostatic-furnace-filters?_vsrefdom=ppcgoogle&tsid=googleppc&ex=f06hqo-eep549-n3l9bq&gclid=CN6svrPYi6ACFRLxDAod0DEbfA

Electrostatic Furnace Filters

Electrostatic Furnace Filters

Air Filter’s Inc. Electrostatic Furnace Filters create its own electrostatic charge so it does not add to your electrical cost, but aids in reducing costs by keeping your air conditioning/ heating coils and equipment cleaner, so they operate at the highest capacity possible.Permanent washable electrostatic air filters are designed with a Heavy Duty Aluminum Frame, 2 Layers of special Polypropylene Weave on the front and back, with a unique poly internal lining designed for years of filtration.

:}

http://www.healthyhomefilterco.com/?gclid=COCGquzYi6ACFRHyDAod6j9SeQ

Our ELECTROSTATIC FURNACE FILTERS replace standard throw-away disposable air filters. Depending on where you live in the country, these filters are known as furnace filters, air conditioner filters or central air filters. They are PERMANENT, WASHABLE, REUSABLE and SELF-CHARGING. They have non-rusting ALUMINUM FRAMES and come with a LIFETIME WARRANTY.

These amazing filters reduce airborne dust in your house! Enjoy cleaner air and fewer allergy symptoms!

SAVE TIME…No need to search for that odd-sized a/c filter that nobody seems to carry.
SAVE MONEY…No need to buy a new furnace filter every few months. Pays for itself in about 1 year!
SAVE THE ENVIRONMENT…No need to fill up landfills with non-biodegradable fiberglass disposable filters.

We feature 5-Stage BoAir brand and 3-Stage Air Care brand permanent furnace filters. We pride ourselves on carrying the best air filters for the best price. Join our thousands of happy customers and switch to an electrostatic furnace filter today!

100% Satisfaction Guaranteed!

:}

http://www.neverbuyanotherfilter.com/?gclid=CMbP4rLZi6ACFRDxDAody3DMdw

OUR ELECTROSTATIC FILTERS ARE PERMANENT, WASHABLE, METAL-FRAMED WITH A LIFETIME WARRANTY.

* Replaces your furnace and/or air conditioning filters.
* Will work with all central heat and a/c systems.

Reduce dust in your house!
Enjoy cleaner air and less allergies!

Tired of forgetting to buy that pesky furnace filter every 3 months?
Tired of looking for that odd-sized filter that no one seems to stock? Stop wasting your time and money on ineffective disposable air filters. We offer permanent, metal-framed washable electrostatic filters from Air Care and BoAir. Never buy another filter again!

Our Electrostatic Filters Feature:

High Dust Arrestance…
Low Air Resistance.

Just vacuum off or hose off every 1-3 months and re-install.
Lifetime Warranty. 95% arrestance. Available in 41 standard sizes and custom sizes. Available in metal frame, deluxe frame and flexible frame (great for mobile home furnaces).
These same electrostatic filters retail elsewhere for $79.99-$99.99…
Get them at neverbuyanotherfilter.com for 50% OFF!

:}

Foam behind your electrical outlets? What is up with that. Well everytime I go into a house the first question I ask is, “do you have any holes in your wall?” They always laugh and say no. I take out a screw driver, take off a plug cover and say, “what do you call that?

http://www.homeadditionplus.com/insulation-info/Electrical-Outlet-Switch-Sealers.htm

Electrical Outlet and Switch Sealers

Photo by – Mark Donovan

Electrical Outlets and switches located on exterior walls are frequently found to be major sources for cold air drafts. Left unchecked you can waste a lot of money on winter home heating energy bills. By installing electrical outlet and switch sealers you can prevent this from happening.

Electrical outlet and switch sealers are thin foam pads that have cutouts for the outlet and switch receptacles. They are very inexpensive and extremely easy to install.

And most importantly, they will stop the cold air drafts and save you a bundle on home heating energy bills. You can find electrical outlet and switch sealers at any home improvement store.To see if you have cold air infiltration around your electrical outlets and switches just place your hand over them and feel for any cold air drafts. Ideally you should do this on a cold blustery day, as this will enable you to more easily detect the drafts.

:}

http://www.ehow.com/how_2383791_insulate-electrical-outlets.html

Heating or cooling a house seems to get a bigger piece of the family budget every month. Sealing the air loss around the home is critical and one of the often forgotten leaks is the electrical and light outlets that reside on the exterior walls of the home. A simple and inexpensive fix performed by anyone with a screwdriver and an hour to spare can save you money

:}

Anybody can change a filter or use a screw driver.

:}

Burning Behavior And The Energy Audit – It is very clear the connection between knowing and doing

The whole purpose of this blog is to combat burning behavior. Burning Behavior is very primite and at this point in our culture counterproductive behavior. Information can counter this largely instinctive behavior. Notice how quickly you want to put caulk in a hole that the smoke test shows you.

So while this meditation was about Energy Audits it is also about what to do when the audits produce KNOWN results. So let us go back to windows for a moment. It is true that they should all be caulk up by now and any holes filled with expanding foam from a can. Another basic question you need to ask for the heating and the cooling seasons is, “Do I have “storm” windows. These windows were originally installed to protect the interior window from storm damage, particularly in tornado country from damage by wind driven objects. They have since been taken on as an integral component of what is called the exterior envelop. In other words the dead airspace that they provide ups the R value of 2 pieces of glass whose R value collectively might be as low as 2. If you do not have storm windows or during the height of the cooling season in particular you put the back of you hand near the low e film cover window and you still feel cold, you may need to apply plastic to the outside or inside of the windows. You amy also need to think about buying new windows. This can be daunting at 160 $$$ a pop still it also is motivation to considering getting rid of some windows all together.

The exterior application used to be about the only way to do it. You bought a roll of 3 mill or 6 mill plastic, cut card board strips, and used carpet tacks to nail them up. With the invention of the staple gun things got alot easier but you still do damage to the window sills themselves. second story windows also require a 16 foot extension ladder. They come in kits now and may even include adhesive strips:

http://www.google.com/products?um=1&hl=en&rlz=1B3RNFA_enUS268US269&q=plastic+window+insulator+kit+exterior&oq=&ie=UTF-8&ei=2C-ES6uAIYzgngfwmrnpAQ&sa=X&oi=product_result_group&ct=title&resnum=3&ved=0CCYQrQQwAg

  1. Outside Window Insulator Kit

    $14.00 new

    BIC Warehouse

    Outside Window Insulator Kit

    an extra pane of insulation, preventing frosty windows Special weather-resistant door plastic weatherstrip wndw insul kit window outside wndow insltr.

    Add to Shopping List

  2. Frost King P712H Economy Outdoor Plastic Storm Window Kits 3-Foot ...

    $1.95 new

    Frost King P712H Economy Outdoor Plastic Storm Window Kits 3-Foot …

    2 Pack, 3′ x 6′, 1,25 Mil, Exterior, Storm Window Cover Kits, With Fiber Framing Strips & Nails.

    Add to Shopping List

  3. Outside Window Insulator Kit

    $13.58 new

    GrabCart

    Outside Window Insulator Kit

    an extra pane of insulation, preventing frosty windows Special weather-resistant door plastic weatherstrip wndw insul kit window outside wndow insltr.

    Add to Shopping List

  4. Window Stretch Film Kit By Thermwell Products V93h

    $4.99 new

    eBay

    Window Stretch Film Kit By Thermwell Products V93h

    Frost King Outdoor Window Insulation Kit Outdoor use only, plastic stretch film installs easily from the outside. Apply double-face tape to metal, .

    Add to Shopping List

  5. Frost King P712H Economy Outdoor Plastic Storm Window Kits 3-Foot ...

    $1.42 new

    Frost King P712H Economy Outdoor Plastic Storm Window Kits 3-Foot …

    2 Pack, 3′ x 6′, 1,25 Mil, Exterior, Storm Window Cover Kits, With Fiber Framing Strips & Nails.

    Add to Shopping List

  6. Frost King P712H Economy Outdoor Plastic Storm Window Kits 3-Foot ...

    $2.36 new

    noble-sales-co-inc.amazon…

    Frost King P712H Economy Outdoor Plastic Storm Window Kits 3-Foot …

    2 Pack, 3′ x 6′, 1,25 Mil, Exterior, Storm Window Cover Kits, With Fiber Framing Strips & Nails.

    Add to Shopping List

  7. Frost King Outdoor Window Insulation Kit

    $4.37 new

    BIC Warehouse

    Frost King Outdoor Window Insulation Kit

    W. x 504? L (42′) Brand #: Thermwell Prods. Co. V93H UPC: 077578018119 Keywords: window insulator kit stretch shrink film wndw insul plastic weatherstrip patio.

    Add to Shopping List

  8. Frost King Outdoor Window Insulation Kit

    $4.61 new

    Frost King Outdoor Window Insulation Kit

    V96H: Patio doors up to 7′ x 9′ or picture window kit: 1 plastic film sheet 84” W. x 110” L., 1 roll tape 1/2” W. x 504” L. (42′).

    Add to Shopping List

  9. Frost King Outdoor Window Insulation Kit

    $4.24 new

    GrabCart

    Frost King Outdoor Window Insulation Kit

    504A” L (42′) Brand #: Thermwell Prods. Co. V93H UPC: 077578018119 Keywords: window insulator kit stretch shrink film wndw insul plastic weatherstrip patio.

    Add to Shopping List

:}

But for many reasons the  indoor kits are the ones that I would use. They are much easier to use, require no ladder and do no damage to the sills. My sister Joann puts them up at my dads house every year and I can attest to their effectiveness:

Express Checkout with PayPhrase

What’s this? | Create PayPhrase

More Buying Choices
Add to Cart acehardware…
$16.99 + $3.97 shipping
In Stock

Add to Cart Denny And Kathy’s Superstore
$16.99 + $3.97 shipping
In stock. Processing takes an additional 3 to 4 days.

Add to Cart SBC Hardware Store
$16.99 + $4.99 shipping
In Stock

25 used & new from $12.99

Have one to sell? Sell yours here

3M 2141W Indoor 5-Window Insulator Kit
Zoom
See larger image (with zoom)

3M 2141W Indoor 5-Window Insulator Kit

Other products by 3M

4.6 out of 5 stars See all reviews (40 customer reviews)
40 Reviews
5 star: (30)
4 star: (7)
3 star: (1)
2 star: (1)
1 star: (1)

› See all 40 customer reviews…


List Price: $22.54
Price: $17.93 & eligible for FREE Super Saver Shipping on orders over $25. Details
You Save: $4.61 (20%)

Special Shipping Information: Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.

Technical Details

  • Reduces heating costs and saves energy
  • Stops cold drafts, helps prevent frost build-up and reduces condensation
  • Performs like an extra storm window
  • Shrinks tight for wrinkle-free, clear-as-glass results
  • Increases R-value by 90% over an average single pane window.

Product Description

From the Manufacturer

Get your home ready for winter with 3M energy solutions. Our window insulator kits are easy to install, and help keep your utility bill low during the cold months. Plus they use Scotch Window Film Mounting Tape and have the clearest film. The cost of heating your home may be rising, but there’s something you can do. 3M window insulator kits help keep the warm air in and cold drafts out. And your energy bill down. Tape: 1/2 inch by 12 yard. Film: 62 inch by 210 inch.

Product Description

Stops cold drafts and helps prevent frosty windows. Clear as glass. Easy to install requires only scissors and a hair dryer for installation. Safe application to aluminum, painted or varnished wood, or vinyl clad window moulding. Film wrinkles are removable.

:}

Oh and in the heating season don’t forget to bag and seal you window air conditioning unit.

:}

Insulation – What a way to end the week

It is Jam Band Friday – ( http://www.youtube.com/watch?v=3JW-OU3LkM8 )

Humans burn at 98.6. If we lived in a perfectly insulated and airtight world we would have to vent our homes in the winter. Some people in colder climates have those homes, but us’ens in the uninsulated leaky drafty Midwest don’t. I tell people to put as much insulation WHEREVER they can.

( http://www.youtube.com/watch?v=G6x8GGXrCFQ )

These people favor fiberglass and are trying to dis’ cellulose:

http://www.naima.org/pages/resources/faq/faq_home.html

FAQs About Residential and Commerical Insulation

What does insulation actually do for my home?

What areas of my home should be insulated?

How do I know how much insulation I need for my home?

What is R-value?

Where do I find R-value information when I go to buy insulation?

What are the options when choosing insulation?

How can I be sure I’m getting the best performance from the insulation in my home?

Are there rebates available for installing insulation?

If I am adding more insulation to my home do I need to remove what I already have?

What Kind of Insulation Do Builders Use on Their Own Homes?


What does insulation actually do for my home?

Fiber glass insulation keeps your home cool in the summer and warm in the winter, because insulation resists the flow of heat. Heat is a form of energy and always seeks a cooler area – flowing out of the home in the winter and into the home in the summer. By reducing heat flow, a properly insulated home uses less energy for heating and cooling.

In addition to being an energy saver, fiber glass insulation also acts as a sound absorber. When installed in walls and ceilings, it can reduce the transmission of sound from one room to another or from the outside. In today’s noise-laden environments, more and more homeowners are soundproofing their homes.

A well-insulated home increases the overall comfort of the home and adds to its resale value. Whether your home is new or old, it pays to insulate.

What areas of my home should be insulated?

Insulation is not just for attics and outside walls. Insulation should also be installed in other areas of your home such as ceilings with unheated spaces, basement walls, floors above vented crawl spaces, cathedral ceilings, floors over unheated garages or porches, knee walls, and in between interior walls (especially bathrooms), ceilings or floors for extra sound control.

How do I know how much insulation I need for my home?

The amount of insulation in a home varies depending upon where you live. NAIMA has developed recommended levels of insulation for various climate zones. These recommendations are based on recommendations from the U.S. Department of Energy (DOE) and the International Energy Conservation Code which is the model building code for the United States.

Click here to visit SimplyInsulate.com to learn about what zone your home is in and how much you insulation you need.

What is R-value?

Insulation is identified and labeled by R-value. “R” stands for resistance to heat flow. The higher the R-value, the greater the insulating power.

Where do I find R-value information when I go to buy insulation?

Insulation is identified and labeled by R-value. “R” stands for resistance to heat flow. The higher the R-value, the greater the insulating power. Manufacturers of insulation products print R-values of their products either on the bags or on the labels. In most cases, R-values are also printed on the facings of fiber glass batts and rolls.

:}

( http://www.youtube.com/watch?v=BJCTrolF3CY )

You can use just about anything as insulation.

http://oee.nrcan.gc.ca/residential/personal/new-home-improvement/choosing/insulation-sealing/materials/khi-insulation.cfm?attr=4

The Proper Choice of Insulation

The proper choice of insulation depends on its final use. In most applications, good resistance to heat flow is not the only thing you will have to consider. In specific situations, insulation may also need some of the following properties:

  • resistance to high temperatures
  • resistance to moisture flow (can it reduce the movement of water vapour?)
  • resistance to air movement (can it act as an air barrier?)
  • a fire-rated protective covering

Once you have matched the material properties with the specific application, consider the following installation factors:

  • Is it relatively easy to install?
  • Is it the best buy for the space available (either high insulating value per dollar if you have lots of open space, or high insulating value per thickness if space is restricted)?
  • Is it available locally?
  • Will it be easy to install the insulation to fill the space completely?
  • Can it conform to surface irregularities?
  • Is it rigid enough to provide support for finished materials or resist pressures against its surfaces?
  • Does one insulation require more accessory products than another (fire protection, framing, air and vapour barrier)?

In short, the choice of insulation will largely depend on how it will be used. Different types of insulation are commonly used for insulating wallsbasements and attics. Fortunately, particular insulation jobs will quickly eliminate some materials, making the choice much easier.

:}

( http://www.youtube.com/watch?v=gZ_kez7WVUU )

Batt or Blanket Insulation

Loose-Fill Insulation

Mineral Fibre

Cellulose Fibre

Glass Fibre

Mineral Wool (Slag and Rock Wool)

Vermiculite

Rigid Board Insulation

Glass-Fibre Boards

Expanded Polystyrene

Extruded Polystyrene

Polyurethane and Polyisocyanurate Boards

Phenolic Foam Boards

Spray-Foam Insulation

Polyurethane Foam

Semi-Flexible Isocyanurate Plastic Foam

Phenolic Foam

( http://www.youtube.com/user/thepurplechannel?blend=1&ob=4#p/u/2/1Xm4os2ugaA )

:}

Just copying all the types of insulation tuckered me out.

( http://www.youtube.com/user/thepurplechannel?blend=1&ob=4#p/u/3/wok0fV4Fp7w )

:}

Hot Water Blankets – Stop the presses I made a mistake

When I was talking about making a list of your energy consuming equipment and taking actions like cleaning the coils on your refrigerator and your freezer, and  cleaning the filters on your cooling and heating equipment, I forgot the most easy and largest savings step. That would be your hot water heater. Like the other equipment you do need to clean it. So listen to the plumbing guy about cleaning your gas or electric water heater. They are different:

Electric

http://www.youtube.com/watch?v=_GERpIx_QLo

Gas

http://www.ehow.com/video_4872205_clean-out-gas-hot-water.html

So was that fun or what. If you ended up with water allllllll over your basement floor, practice makes perfect. Now it is time to put on another layer of insulation. How much is up to you but R 60 is probably too much.

http://www.stretcher.com/stories/970127c.cfm

First turn your water heater thermostat to 120 no matter what this guy tells you 140 is too high unless you are a family of 5.

Most of us received our first introduction to the hot water heater blanket back in the ’70’s when conserving energy became important. They became a familiar addition to many homes. But how effective are they really? And can a heater blanket actually pay for itself if the hot water heater is in a part of the house that’s not subject to extreme weather? Let’s see if we can find out.

First, a little bit about water heaters and insulating blankets. A hot water heater is just a tank of water that’s heated to a preset temperature (generally about 140 degrees F.). When you use hot water it’s drawn from the tank and new cold water replaces it. Regardless of whether any water is used it takes energy to keep the water hot. Energy is always escaping to the colder air that surrounds the tank.

Almost all heaters have at least some minimal level of insulation to help keep the heat inside the tank. Newer models, especially those built in the last ten years, have more insulation than older models.

A water heater blanket is made of insulation contained in sheet plastic so that it can be attached to the water heater. Blankets are rated based on their ‘R’ value just like other insulation. A blanket with R-11 is recommended.

The blankets are easy to install. The only tools you’ll need are a razor knife and a tape measure. The cost is fairly modest with most running between $10 and $25.

How effective are they at reducing energy costs? The Iowa Energy Center says that a properly installed blanket can reduce energy loss by 25% to 45%. If you consider that Florida Power and Light estimates that the average family of four spends $25 each month for hot water that can be quite some savings. That’s not to say that you’ll save 25% of $25 each month. You’ll still need to heat water to replace the hot water in that shower. But a hot water blanket will pay for itself in short order.

Now let’s try to get specific about Joyce’s question. Does it still pay to install a blanket if your water heater is kept in the garage? How can you tell?

Begin by checking the owner’s manual for your water heater. Some newer models specifically recommend that you do NOT use a heater blanket. If your manual doesn’t mention blankets or you’ve lost the manual (someone please tell me that I’m not the only homeowner who doesn’t have his manual!) there’s a simple test you can do. Just place your hand on the outside of the heater. If it’s warm to your touch a blanket will save you money.

Is it possible to calculate how much money you’ll save? Well, theoretically yes. But unless you’re related to a grad student in advanced mathematics it’s probably not worth the effort. There are quite a few variables that will effect the answer. How much you pay for energy. How quickly your heater loses temperature. How efficient your water heater is in turning energy into hot water. How much hot water your family uses. Are there periods during the day when no water is being used? Remember, we’re only talking about an investment of $25 or less. We really don’t need sophisticated payback analysis here!

But what about Joyce’s question? We still haven’t answered it. Fortunately, there is a simple way to address it. If you can feel the heat with your hand it’s wise to install a blanket no matter what the surrounding air temperature is.

Look at it this way. Suppose you keep the tank in an unheated area that’s exposed to outside temperatures. The water tank is being heated to 140 degrees. It’s 20 degrees outside. That’s a difference of 120 degrees. Unless that tank is properly insulated you’d expect to lose some heat.

What about if you have the heater in a attached garage like Joyce? It’s probably not unreasonable to guess that the temperature drops to 60 degrees in the garage. That means that there’s still a difference of 80 degrees between the tank and the air surrounding it.

So if you saved the 25% with the heater outside, you could expect to still save 2/3 of that with the heater in the garage. (80 degrees divided by 120 degrees = 2/3) Well worth the time and money you’ll spend on installing a heater blanket.

One warning that we do need to pass along. DO NOT insulate the bottom or top of gas hot water heater tanks. You need to leave plenty of room for the pilot light and for the flue draft. Be very careful to follow installation instructions. Failure to do so could be very costly and dangerous!

In addition to water heater blankets, there are other things that you can do to reduce the costs of that hot shower. You can insulate the hot water pipes. Lowering the tank temperature is another option. Many people have installed timers and low flow shower heads. If you have an electric tank and it’s in the basement you might even want to place it on a Styrofoam pad to reduce the heat lost to the cold floor.

The bottom line is that water heater blankets are inexpensive, easy to install and efficient. You don’t need to be that family of four spending $300 each year for hot water the savings can add up. It’s an easy way to stretch a few dollars for something more important!

http://www.energysavers.gov/your_home/water_heating/index.cfm/mytopic=13070

http://www.google.com/products/catalog?hl=en&source=hp&q=water+heater+blanket&oq=&um=1&ie=UTF-8&cid=3885595677729203527&ei=X3d9S_qbDpKSNqDK_N0K&sa=X&oi=product_catalog_result&ct=result&resnum=1&ved=0CBQQ8wIwAA#ps-sellers

:}

Notice what he said about insulation for the hot water line. They make slit foam cuffs that just slip over your warm water pipes. If you kitchen sink is a long way from your heater, (mine is 40 feet) it can take forever to get hot water and if you turn it off for very long you are back to cold again.

:}

Last Post On Windows – For this meditation on home energy improvements

Windows and Doors in your residence are the fine line between Rehabilitation and New Build. To use Professional Speak, your house consists of an interior and an exterior envelop with insulation inbetween even if that insulation is only air. The whole goal of energy rehabs is to dramatically tighten both the interior and the exterior of the house and then increase the insulation where possible. This is a separate issue in a way from the energy consumption in the house itself. So when you get to the parts that move…eg windows and doors that is where the expense can climb rapidly. If you are a home owner, new windows and doors make sense BUT once you open the cavities shouldn’t you check the insulation and what about upgrading the wiring? Why not tear the whole thing down and start again? HMMMM

So if you are interested in new here are all the usual suspects:

https://web.pella.com/supportcenter/Pages/Consultation.aspx/?Network=Google&Campaign=Champaign_722:{keyword:defaulttext}:P&Branch=Champaign+Local&gclid=CMnLu5–958CFRk45wodfk3tXA&sissr=1

http://www.searshomeimprovements.com/productoffer1.aspx?o=3&t=1482&gclid&OVMTC=Phrase&site=&creative=3524009401&OVKEY=windows%20and%20doors&gclid=CI62jcO-958CFdKO5wodhgaaYA

http://installation.homedepot.com/windows/google/index.html?cm_mmc=SEM|RPM|HS_Windows|GGL_8152

http://www.andersenwindows.com/

:}

For a lot cheaper you can get low e-films that will keep the heat in during the winter and out during the summer. You have to decide how far you go.

http://planetgreen.discovery.com/home-garden/low-e-window-film.html

Green Your Home for Winter: Apply Low-E Window Film

Jasmin Malik Chua, Jersey City, USA

Jasmin Malik Chua
By Jasmin Malik Chua
Jersey City, NJ, USA | Sun Mar 23, 2008 01:21 PM ET

If you haven’t socked away enough money for new, energy-efficient windows-or you’re a renter who doesn’t have the latitude to make major home improvements-consider applying one of several types of window film to your panes for instant energy savings.

A plastic film with low-emissivity (low-E) coating, which can reduce heat loss through old windows by 30 percent to 50 percent, provides a thin metallic coat the blocks off heat and ultraviolet rays. Apply the low-E film to the inside pane of your window to trap heat indoors in the winter. When the mercury begins to rise, flip the film over to the outside pane to keep the sun’s heat out of your domicile. Plus, according to Lowe’s, insulating window films will pay for themselves in less than a year in reduced utility bills.Do-it-yourself window film is available in rolls or in precut kits, but you might want to consult the professionals on very large windows. Here are some companies that manufacture energy-saving window films:

1. Bekaert

2. CP Films

3. Film Technologies

4. Madico

5. Plastic View International

[Via ::The Daily Green]

Difficulty level: Easy to moderate

:}

My brother tried it in Las Vegas and they dropped the temperature a lot. To summarize we have covered windows and door from shutters, to new windows and doors to films and sprays for windows and doors. The final step tomorrow is to deal with awnings. Isn’t the green economy fun!

:}

Taking A House Window Out Of Service – Get rid of the darn thing

It’s Jam Band Friday – http://www.youtube.com/watch?v=TChocbG_TTI

During the height of the summer and for most of the winter there are windows that you can probably do without. I hate windows. Even when you dress them up they are Energy Dogs. So here is an easy way to get rid of them. This only works for windows that move. Cut 2 pieces of plywood roughly 2 inches bigger than the window casement. Glue as much styrofoam insulation (R Board) as you can to each piece of plywood centered into the cavity of the window space. Drill 2 holes in each piece of plywood centered in the top and the bottom quadrant of each piece of plywood. Open the window so that the 2 panes are in the center of the window case. Fit the pieces of the plywood over the outside and the inside of the window. Insert long bolts through the two holes and tighten nut and washer to either the inside or the outside piece of plywood depending on which way you ran the bolts. You can even run a light bead of caulk around the two piece of plywood, the washer and the bolt head for complete air tighness. All done. Problem solved. Window gone.

( http://www.youtube.com/watch?v=TChocbG_TTI )

However if you are into appearances well you can invest in systems that accomplish some of the same goals.

http://www.doityourself.com/stry/plylox

http://www.thisoldhouse.com/toh/article/0,,1210347,00.html

http://video.bobvila.com/m/21315189/emergency-board-up.htm

I always wanted to get those last 2 back together again. If you have big bucks you may want to get shutters that actually work. Not the decorative ones you usually see.

( http://www.youtube.com/watch?v=SSzWPNFX7sc&feature=related )

http://www.3dayblindsinfo.com/0-percent?source=gg-plantation-shutters&copy=shutters&gclid=CNijw8ue7Z8CFRAeDQodYHmIXQ

Looking for Shutters?
Let us help.

Shutters

From sleek contemporary styles to rustic charm, nothing adds value to your home like Shutters. Designed to last a lifetime, they are beautiful, versatile and control ventilation and light with unmatched precision. Our Design Consultants know how to use the beauty of your windows to inspire feelings of rest, drama or excitement.

http://www.hunterdouglas.com/

( http://www.youtube.com/watch?v=CvURG9-wK3w&feature=related )

http://www.makeyourhomeenergyefficient.com/energyefficientwindowcoverings.html

~Window Shutters

You can find both exterior and interior window shutters in a variety of colors and materials.

View all Blinds.com Plantation Shutters

Fauxwood Shutters

:}

More on windows tomorrow. God I hate those things.

( http://www.youtube.com/watch?v=j2RSyMRJHUE&feature=related )

:}