Energy Consumption And Healthcare – What does treatment really cost.

The basic problem in the beginning of the conservation movement (energy) was no one knew how much energy was being used and thus how much could be saved. The same is true in spades for medicine. Think about it, how much does an xray cost? No one knows. So how much energy does an xray take? When you ask you get answers like this…

http://greenanswers.com/q/72578/science-technology/how-much-energy-does-it-take-make-x-ray

seanm (881) 3/10/10 10:37am

This is a good question and the answer varies depending on the type of X-ray machines you’re talking about. Traditionally X-rays have only been possible with a high voltage generation, which takes a lot of energy, anywhere from 30 to 150 kV. By comparison, high-voltage electric transmission lines operate at about 110 kV, so we’re talking about a lot of power. However, X-rays can be exposed in tiny fractions of seconds and since the 1980s technology has advanced to make X-rays even faster so as to reduce the exposure of operators and patients to radiation. I could not find specific energy consumption ratings on various X-ray machines, but there are efforts afoot to replace traditional X-ray machines with digital ones, which in addition to eliminating the need to keep film and developer on hand will reduce energy consumption by up to 78%.

Citations: http://en.wikipedia.org/wiki/X-ray_tube
http://www.gereports.com/picturing-the-benefits-of-digital-x-rays/

:}

say what…

:}

or an mri (they routinely charge 2 to 3 thousand $$$)???

http://answers.yahoo.com/question/index?qid=20080908210925AA26KhC

How electricity does an Xray or MRI machine use per scan? How much does it cost the Hospital?

My brother insists that it takes a LOT of electricity in order to power and Xray or MRI machine just for one scan. He thinks it uses more than a normal household uses per month. I doubt that. Does anyone know how much is used or how much it costs? No guesses please…my other brother loves to answer questions with guess-answers because he thinks he’s probably always right…conveniently nobody ever has a computer when he gives these questionable answers and nobody remembers what he said

answer1

Best Answer – Chosen by Voters

The amount of energy used will always be constant on the machines the only way to solve this problem is to determine where the machines are used to get kilowatt costs as they are more expensive in some areas of the country. Once you determine that factor it will be easy to solve the equation.

answer2

Here is a listing of a typical “open” MRI Model describing the power consumption:
Manufactured by Esaote S.p.A.; a low field open MRI scanner with permanent magnet for orthopedic use. The outstanding feature of this MRI system is a patient friendly design with 24 cm diameter, which allows the imaging of extremities and small body parts like shoulder MRI. The power consumption is around 1.3 kW and the needed minimum floor space is an area of 16 sq m.

So it uses about 1.3kW to run. The usual power outlet is 480 volts/3 phase/125 amps. It uses more power (up to 2kW) when the magnet is on. Keep in mind that this is considered a ‘small’ MRI machine. Larger units weigh up to 12 tons and are assembled on site in phases.

Typical US 3-prong outlet is 125 volts/15 amps.

A typical US household uses approximately 8900 kW per year. So one MRI scanner consumes approximately several dozen households worth per year depending on how often it’s used.

Source(s):

RN

answer3

X ray machines draw a lot of power for a very short time, a few seconds. So overall power consumption is low. MRI is no different.
Overall, the consumption would depend on how much it is used. If the X ray machine is being used for 1000 films, the consumption would be equal to a household consumption.

:}

The point being that we have no idea what our healthcare costs and doctors want to keep it that way.

:}

Healthcare And Computer Energy Savings – Turn them off and save money

That is right – turn off your computer when not using it and the medical world could save millions of $$$. Why don’t they energy manage their data networks? Because they don’t have to, they think they are Gods.

:}

http://it.med.miami.edu/x1159.xml

Computer power management

What’s the big deal?

Research shows that personal computers (PC) are not being actively used during the vast majority of the time that they are kept on.  It is estimated that an average PC is in use 4 hours each work day and idle for another 5.5 hours.  It’s also estimated that some 30-40 percent of the US’s work PCs are left running at night and on weekends.

Office equipment is the fastest growing electricity load in the commercial sector.  Computer systems are believed to account for 10 percent or more of commercial electricity consumption already.  Since computer systems generate waste heat, they also increase the amount of electricity necessary to cool office spaces.  (Yes, they lower the cost of heating somewhat.  That’s not a big factor in Miami.)

For the Medical Center, we estimate the savings from PC power management to be hundreds of thousands of dollars annually, even without factoring in increased office cooling costs.  Considerable savings are also possible from easing wear-and-tear on the computers themselves.

If you’d like to make a savings calculation for yourself or your organization — on electricity, dollars, trees, CO2 emissions — you can do that here.

Isn’t this “automatic” on most computers?

Almost all computers and monitors sold in the US today come with ENERGY-STAR energy-saving features.  But they generally don’t work unless you set them.

Both Windows and Apple/Mac systems allow you to set the amount of idle time that occurs before the system goes into “standby” or “sleep”  mode:

  • On Microsoft (Windows) systems, times are set in the Power Options section of the Control Panel.  Get there by the following path: Start > [My Computer >] Control Panel > [Performance and Maintenance >] Power Options.
  • On Apple (OS X) systems, standby and power option settings are set under System Preferences.  Go there and then select Energy Saver.

Standby/sleep modes are suitable for when your computer is idle for an hour or more.  A full system shut-down and power-off is appropriate at the end of the work day.

Will power management hurt my computer?

It’s a myth that turning computers off and on shortens their lives — unless you turn them off many, many, many times every day.  It’s also a myth that starting the computer requires a lot of “extra energy”: it actually only takes the equivalent of a few seconds of running time power.

Computers generate a lot of heat — principally from their central processor units (CPU).  Allowing a “cool down” during a power-off period will generally increase the life span of the entire system.  Allowing your computer to rest its moving parts, like the spinning hard drive, cooling fans, etc., will tend to increase the life-span of those components.

The reboot of the system that takes place when power is restored has another positive effect.  Many software patches and upgrades require a reboot to be fully installed and functional.  A computer that is only rarely rebooted may lag behind on software updates, and accordingly be more vulnerable to malware attacks.

Is there any downside to power management?

Obviously you have to consider the value of your time too.  A fully powered-down “off” computer takes a considerably longer time to restore to operational status than one in stand-by mode.  One in stand-by takes longer to restore than one that is fully on — although not much longer.

We’re not recommending you turn your system entirely off unless you plan to be away from it for a long time — such as at the end of the work day.  We do recommend setting a sleep/stand-by mode for when your system is idle for 30-60 minutes or more.

Unless your system is controlling an ongoing process, such as running/monitoring laboratory equipment, there is usually no good reason to leave it on when you are away for extended periods.  And many good reasons not to.

How does power management work?

Power management savings come from reducing hardware power to sleep levels when the computer is not fully active.   Idle-ness is defined by an absence of mouse or keyboard activity (and no on-going processes for applications) for a set time period.

:}

That’s right they saved hundreds of thousands of $$$. So how many Medical Centers like this exist? Well how many Major Universities are there in the US. That is right…hundreds of millions of $$$$

:}

Global Warming – Tundra melts releasing Methane by the ton and Pelicans refuse to migrate

Anybody that says there is no proof of Global Warming is either being paid off, blind or lying.

http://e360.yale.edu/content/feature.msp?id=2229

11 Jan 2010: Report

Arctic Tundra is Being Lost
As Far North Quickly Warms

The treeless ecosystem of mosses, lichens, and berry plants is giving way to shrub land and boreal forest. As scientists study the transformation, they are discovering that major warming-related events, including fires and the collapse of slopes due to melting permafrost, are leading to the loss of tundra in the Arctic.

by bill sherwonit

During the summer of 2007, lightning strikes sparked five tundra fires on Alaska’s North Slope. Two of the fires — rare events north of the Arctic Circle — began in neighboring drainages, only a couple of days apart. That, in itself, might have gained the attention of tundra researchers. But the 2007 fire season would ultimately burn a record swath across the North Slope, while reshaping the way scientists think about the Arctic’s response to global warming.

Researchers have known for years that the Arctic landscape is being transformed by rising temperatures. Now, scientists are amassing growing evidence that major events precipitated by warming — such as fires and the collapse of slopes caused by melting permafrost — are leading to the loss of tundra in the Arctic. The cold, dry, and treeless ecosystem — characterized by an extremely short growing season; underlying layers of frozen soil, or permafrost; and grasses, sedges, mosses, lichens, and berry plants — will eventually be replaced by shrub lands and even boreal forest, scientists forecast.

Much of the Arctic has experienced temperature increases of 3 to 5 degrees F in the past half-century and could see temperatures soar 10 degrees F above pre-industrial levels by 2100. University of Vermont professor Breck Bowden, a watershed specialist participating in a long-term study of the Alaskan tundra, said that such rapidly rising temperatures will mean that the “tundra as we imagine it today will largely be gone throughout the Arctic. It may take longer than 50 or even 100 years, but the inevitable direction is toward boreal forest or something like it.”

Alaska
iStock
With temperatures increasing across the Arctic, the Alaskan tundra as we know it could be gone before the end of the century, some scientists predict.

Dominique Bachelet, a climate change scientist at Oregon State University, forecasts that by 2100 tundra “will largely disappear from the Alaskan landscape, along with the related plants, animals, and even human ecosystems that are based upon it.” She made that prediction in 2004, and now says “the basic premise still holds, but the mechanism of change may be different than we thought.” Instead of long-term, incrementally complex changes caused by gradually warming temperatures, “extreme events will be the important triggers for change.” Hot-burning fires or slumping hillsides tied to melting permafrost could “clean the slate and allow new species to establish themselves,” Bachelet said.

The transformation of the tundra — the word comes from the Finnish, tunturia, meaning “treeless plain” — will have a profound impact on the creatures that live and breed there, including grizzly bears, wolves, foxes, and many species of waterfowl and migratory songbirds. Especially hard-hit could be caribou, which depend heavily on lichen as a food source.

:}

This is an amazing article. More amazing because Sarah Palin has lived through this for the last 10 years and still does not admit that it is even happening. Then there is the methane and the frozen Woolly Mammoths that keep popping out of the ground.

http://www.guardian.co.uk/environment/2010/jan/14/arctic-permafrost-methane

Arctic permafrost leaking methane at record levels, figures show

Experts say methane emissions from the Arctic have risen by almost one-third in just five years, and that sharply rising temperatures are to blame.

David Adam, environment correspondent

guardian.co.uk, Thursday 14 January 2010 19.00 GMT

Article history

Arctic tundra in SiberiaPermafrost in Siberia. Methane emissions from the Arctic permafrost increased by 31% from 2003-07, figures show. Photograph: Francis Latreille/Corbis

Scientists have recorded a massive spike in the amount of a powerful greenhouse gas seeping from Arctic permafrost, in a discovery that highlights the risks of a dangerous climate tipping point.

Experts say methane emissions from the Arctic have risen by almost one-third in just five years, and that sharply rising temperatures are to blame.

The discovery follows a string of reports from the region in recent years that previously frozen boggy soils are melting and releasing methane in greater quantities. Such Arctic soils currently lock away billions of tonnes of methane, a far more potent greenhouse gas than carbon dioxide, leading some scientists to describe melting permafrost as a ticking time bomb that could overwhelm efforts to tackle climate change.

They fear the warming caused by increased methane emissions will itself release yet more methane and lock the region into a destructive cycle that forces temperatures to rise faster than predicted.

Paul Palmer, a scientist at Edinburgh University who worked on the new study, said: “High latitude wetlands are currently only a small source of methane but for these emissions to increase by a third in just five years is very significant. It shows that even a relatively small amount of warming can cause a large increase in the amount of methane emissions.”

Global warming is occuring twice as fast in the Arctic than anywhere else on Earth. Some regions have already warmed by 2.5C, and temperatures there are projected to increase by more than 10C by 2100 if carbon emissions continue to rise at current rates

:}

And it is confusing the birds.

http://www.oregonlive.com/news/index.ssf/2010/03/brown_pelicans_wont_flow_south.html

Environment, Oregon Coast, Outdoors »

Brown pelicans won’t fly south from Oregon coast and that worries scientists

By Lynne Terry, The Oregonian

March 12, 2010, 6:06PM

peli.jpgView full sizeBenjamin Reed/Los Angeles TimesA group of brown pelicans gathers at the Wildlife Center of the North Coast near Astoria. These birds were among those lodged at the center after they failed to fly south for the winter.Unlike past years, they’ve refused to return to California.

In January, scientists were stunned to see hundreds of brown pelicans that normally fly south before winter lingering on the Oregon coast.

Now it’s March and dozens are still here.

“This is a first for us,” said Roy Lowe, seabird specialist with the U.S. Fish and Wildlife Service.

Biologists are worried. Birds have starved to death and been pummeled by storms. Scientists are also perplexed about why they’ve altered their habits. Climate change could be a factor — no one really knows for sure.

But last week, birders counted dozens on the coast. Lowe said there have been sightings of 60 in Newport, 25 at Charleston and seven in Depoe Bay.

“Maybe some of them will survive the spring,” he said. “I haven’t heard of any moralities. They haven’t looked good for a long time, but they continue to hang in there.”

The downwelling ocean conditions off the coast this time of year do not support an abundance of forage fish for the pelicans. Lowe said they could be finding food in estuaries and lower bays, but they’re also scavenging.

“They’ve been hanging around where people are crabbing and going for any bits of fallen food,” said Deborah Jaques,  a wildlife biologist in Astoria who contracts with state and federal governments.

In the summer, flocks of about 20,000 brown pelicans live on the Oregon Coast and then fly to Southern California and Mexico before winter to breed.

Scientists said the El Nino conditions, with warmer ocean temperatures in the equatorial Pacific, could have affected the brown pelican’s food supply.

In January, many were found injured by storms or starved to death.

:}

Things better change soon…

:}

After The Energy Audit – All of the things that I suggested that you do

All of those things could have taken SEVERAL Years to complete.You have to ask yourself, “How badly must my house have been designed for me to have to do all this work”? The answer is VERY badly. The big housing push in post WWII America led to many bad practices. But let’s face it our population went from 60 million to over 325 million in 3 decades and energy was a nickle or less a kilowatt. That is just an excuse I know but it is all I got. Hostility to our environment is a genetic trait for Americans. Having a Capitalistic Economy does not help because it has a total disregard for the environment. It is in fact dismissed as an externality.  Is Capitalism psychotic? Look at how it treats the only home we have got. It defiles it.

So hear is a look at more earth friendly models.

http://scienceray.com/biology/ecology/three-extreme-eco-friendly-houses-of-the-future/

Three Extreme Eco-friendly Houses of the Future

Published by Nelson Doyle
November 9, 2008, Category: Ecology

The most extreme eco-friendly houses of the future reduces the environmental impact on the planet and demonstrates how less means more quality living.

With so much attention being drawn towards the perils of our planet and the environmental impact that a global population is causing on natural resources, some forward-thinking companies and individuals are developing new ways to solve our housing needs and the future impact to the environment once built. It requires creative people like these to develop solutions to solve critical issues like the ones we have to deal with in today’s environment.

The majority of eco-friendly houses share similar engineering characteristics such as; smaller living spaces and recycled building materials incorporated into the design. Some houses incorporate solar panels, wood-burning stoves or other energy-saving heating and cooling appliances. The potential costs saving on utility bills, property taxes, home maintenance, and furniture would more than make this kind of living ideal for single or duel family housing.

Ewok-Style Tree House

:}

I could post the photos but out of respect I will say please see the article for more.

:}

This Ewok-style tree house designed by Canadian carpenter Tom Chudleigh saw the future and built it.

Portable Martin House-To-Go

Honestly, this has to be the most practical house on the planet that is eco-friendly to the extremes. Live anywhere and change your scenery when the mood strikes in your own portable house. The Martin portable house-to-go is built to the highest building standards and is weatherproofed with NASA-approved insulation to endure in extreme weather conditions.

Dome House

The Japanese are amazing engineers in both housing and technology, so it shouldn’t be too surprising that a prefab home manufacturer Japan called “Japan Dome Housing Co., Ltd., developed an amazingly energy-efficient, extreme weather durable, Styrofoam expandable modular igloo-shaped kit house. Oh, yes, it’s true. The house of the future that can be purchased and assembled by you and two or three of your friends in just a matter of 3-days if you work around the clock or about a week if you take your time.

:}

More tomorrow.

:}

Commercially Sold Solar Water Heaters – If we all heated water this way our burning behavior could be cut in half

I mean I am talking world wide. If every women in the world heated water this way their lives would immediately improve and their effects on the environment would come to a stop. They probably would even live better lives. Every bride should demand one.

http://www.radiantsolar.com/solar_options.php?gclid=CLXv0KCWnaACFQvyDAodrxs6Xw

Solar Options

Here are some of the things that a solar heating system can do for you:

SOLAR DOMESTIC WATER HEATING

kids in a tub of domestic hot water The production of domestic hot water is one of the most beneficial and cost effective uses of thermal solar collectors. Many people would be surprised to learn how much energy and environmental impact is required for this use. Water has a “polar” molecular structure and for that reason it requires an unusual amount of energy to change its temperature. In fact, the “heat capacity” of water is about 4 times that of concrete or cast iron. It is a “year around” function that rounds out other seasonal or intermittent solar applications and improves the cost benefit or investment value of the solar heating system. In many places, solar domestic water heaters are eligible for tax credits. We include the domestic hot water heating element in nearly everything we do because it addresses important mechanical issues such as summertime heat control and heat dumping.

:}

http://www.solardirect.com/swh/swh.htm

Passive Solar Water Heater Active Solar Water Heater Trendsetter Solar Water Heater
Warm Climate
ProgressivTube
• Solar Hot Water Passive
system
• Easy to install and
maintain; no moving
parts
• Storage tank must be
installed above or close
to collector
• Uses no electricity; will
function during
blackouts
• Price range:
$1,700.00 – $2,600.00
Moderate Climate
Helio-Pak
• Active Solar Hot Water,
flat plate type
• Pumps, valves &
controllers assist in the
prevention of freezing
• Tanks do not need to
be installed above or
close to collectors
• Uses electricity; will not
function during
blackouts
• Price range:
$2,200.00 – $5,200.00
Cold Climate
TrendSetter
• Solar Hot Water Active,
evacuated tube
• Heavy-duty residential
and commercial
• Additional applications:
Water heating, Radiant
floor heating, Space
Heat
• Price range:
$6,000.00 – $17,000.00

:}

These people are a lot of fun. They been at it for 31 years.

Solarroofs Solar Water Heating Collectors, Commercial & Residential

Welcome to SolarRoofs.com!
solar water heating, solar water heater, solar hot water
Welcome to SolarRoofs.com Inc.
Manufacturer of Easy, Attractive and Affordable

Skyline Solar Water Heaters
We are Dedicated to Making Quality, High Performance Solar Water Heaters that are Easier and Safer to Install. Skyline Collectors Feature 26 Architectural Trim Colors.

Using energy from the sun to heat water is one of the oldest uses of solar energy! Today, millions of homes and businesses around the globe use solar water heating systems because they are so cost effective!

Solar water heating produces energy at 1/3 to 1/4 the cost of Solar Electric (PV). Solar hot water systems are a perfect complement to a PV system and make your solar investment more cost effective. With 30% Federal Tax Credit and other State and Utility incentives, now is the time for you to Harness The Sun for your share of FREE solar energy!

Solar water heaters are the most cost effective way to reduce carbon emissions and reduce dependence on imported energy.

line Please see our GOING SOLAR page to learn more!


We provide extensive Sales Support via our toll free number:

(888) 801-9060

or Email us via our

Contact Page

l

Please Visit our

ONLINE STORE

For Great Values!
l
We look forward to helping you Find a Dealer, Place an Order, or Design your Solar Thermal System!

Extreme Home Makeover with SolarRoofs.com

extreme makeover home edition We have a 31 Year Passion For
Solar Water Heating!

Our Patented Solar Hot Water Collectors have appeared on:
ABC’s Extreme Makeover – Home Edition, History Channel’s
Modern Marvels & Di

:}

Compact Flourescent Bulbs – Now for the really painful part

These babies are expensive and are already being replaced by LED Technology but beginning in 2012 regular lightbulbs will be phased out and eliminated by 2014. Did I say they look funny too. So go around and count all your lights. We have 11 in the bathroom alone. At 2 $$$ a pop that is 22 $$$ just for our bathroom but they last three years, cut your energy use for lighting purposes by at least 2/3rds and are recyclable.

So go to the store and get these:

http://www.bulbs.com/Incandescent_Bulbs/results.aspx?cm_mmc=google-_-light%20bulbs-_-incandescent-_-incandescent&AffID=6

Select a sub-category or click here to see all 670 products in Incandescent Bulbs

“Regular” (A-Shape)

3-Way

Decorative Torpedo & Flame Tip

Exit & Display

Fiesta

Globe

Indicator & Sign

Industrial

Night Light & Holiday

PAR-38

Reflector

:}

You can actually spend 40 $$$ on a house…nobody ever said change was easy or cheap

:}

Hot Water Blankets – Stop the presses I made a mistake

When I was talking about making a list of your energy consuming equipment and taking actions like cleaning the coils on your refrigerator and your freezer, and  cleaning the filters on your cooling and heating equipment, I forgot the most easy and largest savings step. That would be your hot water heater. Like the other equipment you do need to clean it. So listen to the plumbing guy about cleaning your gas or electric water heater. They are different:

Electric

http://www.youtube.com/watch?v=_GERpIx_QLo

Gas

http://www.ehow.com/video_4872205_clean-out-gas-hot-water.html

So was that fun or what. If you ended up with water allllllll over your basement floor, practice makes perfect. Now it is time to put on another layer of insulation. How much is up to you but R 60 is probably too much.

http://www.stretcher.com/stories/970127c.cfm

First turn your water heater thermostat to 120 no matter what this guy tells you 140 is too high unless you are a family of 5.

Most of us received our first introduction to the hot water heater blanket back in the ’70’s when conserving energy became important. They became a familiar addition to many homes. But how effective are they really? And can a heater blanket actually pay for itself if the hot water heater is in a part of the house that’s not subject to extreme weather? Let’s see if we can find out.

First, a little bit about water heaters and insulating blankets. A hot water heater is just a tank of water that’s heated to a preset temperature (generally about 140 degrees F.). When you use hot water it’s drawn from the tank and new cold water replaces it. Regardless of whether any water is used it takes energy to keep the water hot. Energy is always escaping to the colder air that surrounds the tank.

Almost all heaters have at least some minimal level of insulation to help keep the heat inside the tank. Newer models, especially those built in the last ten years, have more insulation than older models.

A water heater blanket is made of insulation contained in sheet plastic so that it can be attached to the water heater. Blankets are rated based on their ‘R’ value just like other insulation. A blanket with R-11 is recommended.

The blankets are easy to install. The only tools you’ll need are a razor knife and a tape measure. The cost is fairly modest with most running between $10 and $25.

How effective are they at reducing energy costs? The Iowa Energy Center says that a properly installed blanket can reduce energy loss by 25% to 45%. If you consider that Florida Power and Light estimates that the average family of four spends $25 each month for hot water that can be quite some savings. That’s not to say that you’ll save 25% of $25 each month. You’ll still need to heat water to replace the hot water in that shower. But a hot water blanket will pay for itself in short order.

Now let’s try to get specific about Joyce’s question. Does it still pay to install a blanket if your water heater is kept in the garage? How can you tell?

Begin by checking the owner’s manual for your water heater. Some newer models specifically recommend that you do NOT use a heater blanket. If your manual doesn’t mention blankets or you’ve lost the manual (someone please tell me that I’m not the only homeowner who doesn’t have his manual!) there’s a simple test you can do. Just place your hand on the outside of the heater. If it’s warm to your touch a blanket will save you money.

Is it possible to calculate how much money you’ll save? Well, theoretically yes. But unless you’re related to a grad student in advanced mathematics it’s probably not worth the effort. There are quite a few variables that will effect the answer. How much you pay for energy. How quickly your heater loses temperature. How efficient your water heater is in turning energy into hot water. How much hot water your family uses. Are there periods during the day when no water is being used? Remember, we’re only talking about an investment of $25 or less. We really don’t need sophisticated payback analysis here!

But what about Joyce’s question? We still haven’t answered it. Fortunately, there is a simple way to address it. If you can feel the heat with your hand it’s wise to install a blanket no matter what the surrounding air temperature is.

Look at it this way. Suppose you keep the tank in an unheated area that’s exposed to outside temperatures. The water tank is being heated to 140 degrees. It’s 20 degrees outside. That’s a difference of 120 degrees. Unless that tank is properly insulated you’d expect to lose some heat.

What about if you have the heater in a attached garage like Joyce? It’s probably not unreasonable to guess that the temperature drops to 60 degrees in the garage. That means that there’s still a difference of 80 degrees between the tank and the air surrounding it.

So if you saved the 25% with the heater outside, you could expect to still save 2/3 of that with the heater in the garage. (80 degrees divided by 120 degrees = 2/3) Well worth the time and money you’ll spend on installing a heater blanket.

One warning that we do need to pass along. DO NOT insulate the bottom or top of gas hot water heater tanks. You need to leave plenty of room for the pilot light and for the flue draft. Be very careful to follow installation instructions. Failure to do so could be very costly and dangerous!

In addition to water heater blankets, there are other things that you can do to reduce the costs of that hot shower. You can insulate the hot water pipes. Lowering the tank temperature is another option. Many people have installed timers and low flow shower heads. If you have an electric tank and it’s in the basement you might even want to place it on a Styrofoam pad to reduce the heat lost to the cold floor.

The bottom line is that water heater blankets are inexpensive, easy to install and efficient. You don’t need to be that family of four spending $300 each year for hot water the savings can add up. It’s an easy way to stretch a few dollars for something more important!

http://www.energysavers.gov/your_home/water_heating/index.cfm/mytopic=13070

http://www.google.com/products/catalog?hl=en&source=hp&q=water+heater+blanket&oq=&um=1&ie=UTF-8&cid=3885595677729203527&ei=X3d9S_qbDpKSNqDK_N0K&sa=X&oi=product_catalog_result&ct=result&resnum=1&ved=0CBQQ8wIwAA#ps-sellers

:}

Notice what he said about insulation for the hot water line. They make slit foam cuffs that just slip over your warm water pipes. If you kitchen sink is a long way from your heater, (mine is 40 feet) it can take forever to get hot water and if you turn it off for very long you are back to cold again.

:}

Energy Audits And Fixes – A year round effort for several years

Why would you say that and won’t comments like that scare people away?  The answer is two fold. The less obvious answer is that the more you tighten your house the more leaks you find. A perfect example in my house is the west wall in the kitchen. As we have tighten the house I have noticed infiltration both in touching the wall plates and on the back of my hand near the wall mounted cabinets. I never noticed that before because we had many other places to tighten up.

But second is the nature of the seasons. Again our wall is a perfect example. It is 20 degrees outside and there is half a foot of snow on the ground. If you waited until it was real hot or cold to do the initial survey using the incense and the chant “I can save money” to purify your house, then it is probably not a good idea to go outside and caulk the crevices I asked you to leave unsealed. You will have to wait for the spring or the fall. Anyway today we look at other “crack stuffers” than caulk. That is the dreaded weather stripping.

http://home.howstuffworks.com/home-improvement/repair/how-to-apply-weatherstripping.htm

How to Install Weatherstripping

Inside this Article

  1. How to Install Weatherstripping
  2. Types of Weatherstripping
  3. How to Install Weatherstripping
  1. Installing Spring-metal and Other Weatherstripping Types
  2. Tubular and Foam-Filled Gasket Weatherstripping
  3. How to Install Weatherstripping Onto Sliding Windows and Doors
  4. See more »
    1. Applying Spring-metal Strips
    2. Applying pressure-sensitive Foam
    3. See all Home Repairs articles
Home & Garden Videos
­­Rising energy costs can make a cold, drafty house a misery that grows increasingly expensive. Sealing your home with tight-fitting weatherstripping can make you feel warm all winter long. You’ll also enjoy the lower utility bills.If you had a 6-inch-square hole in the middle of your front door, you would certainly do something in order to plug it up. Yet there are thousands of homes in which a 1/8-inch-wide crack exists all the way around the door, and this gap is just about the equivalent air loss of that 6-inch-square hole. Letting these cracks exist is like throwing dollars out the door or window. Fortunately, weatherstripping can reduce your heating/cooling bills by as much as 30 percent while reducing drafts that can cause discomfort.

Your home may or may not need weatherstripping. Luckily, there are some very simple ways to find out. If you can feel cold air coming in around doors and windows on a windy day, you know the answer. If you are uncertain, you can create your own windstorm at the precise spot where you suspect air might be leaking. Go outside with a handheld hair dryer and have a helper inside move his or her hands around the door and/or window frame as you move the hair dryer.

Learn More

­ You may discover that all your doors and windows are airtight. Or you may find a door or window that is airtight around three edges but needs help along the fourth edge. What you will probably conclude, however, is that your home has several drafty areas that would benefit from weatherstripping.

In this article, we’ll show you how to install weatherstripping on all parts of your house. We’ll also examine the various types of weatherstripping, which is our first order of business.

:}

Tomorrow we talk more about windows.

:}

Doing Your Own Energy Audit – Try some incense

So far our doityourself audit has consisted of  listing your major energy users, checking their condition and cleaning their filters, checking the ductwork for leaks (at least the ductwork you can get at) and spending some time cleaning out the coils on your refrigerator and freezer. Now we are going to check the house for air leaks. The first and easiest thing to do is walk around the house and simply look for obvious leaks. These would be where any outside service enters the house. Examples would be where your water pipes, electrical wires, phone wires and cable wires enter the house. They should all be sealed tight. If not buy a caulk gun and some caulk and seal them up.

http://www.essortment.com/home/caulkingtipsdo_seay.htm

If you do not know how to caulk, starting outside is easier because you do not have worry so much about the mess and you can wipe your hands on the grass. Also check around all of your windows and doors and vents to make sure they are sealed. If they are not sealed, do not seal those right away. Next we go buy some incense and go back indoors.

http://en.wikipedia.org/wiki/Incense

Congratulations by the way. You have joined the green economy. Now we are going to conduct a house purification ritual from the ancient religion of conservatorium. The reason why I did not have you seal your windows and doors on the outside is because it makes it easier to find the leaks on the inside if they are not plugged. Also it is best that you do this next step when it is pretty windy and preferably cold or hot. So light your incense stick and let it get smokey. Walk around the room very slowly holding the incense stick very close to the wall and chat “I save money” over and over again”. Stop every couple of feet and watch the smoke. If it moves anywhere but up you have a potential leak. Stick a Postit Note next to it and move on (or mark it with a pen or a pencil that is easily removed).

http://homerepair.about.com/od/exteriorhomerepair/ss/winterize_7.htm

Infiltration of cold air from air leaks around doors and windows is as significant a contributor to your heating bill as is poor insulation in the walls and ceiling. An easy way to reduce you heating bill is to reduce these drafts with simple weatherstripping.

Windows

  • On a day when it’s windy outside, close your windows and feel for air leaks. You can use an incense stick for this too if you don’t mind the smell. Watch the smoke trail and if it becomes anything other than vertical, you have an air leak. Typically air leaks will be at the edges where the window is hinged, slides or meets another unit, such as between the two panels of a double hung window.
  • Although you can tape plastic over the windows to seal them, this can be expensive and look bad. It can also reduce much needed light in the winter unless you use the shrink-wrap type of plastic seal. So a better and easier solution is to use inexpensive rope caulk.
  • Press the rope caulk into all the joints where air is leaking.

Doors

The easiest fix here is to check for weatherstripping on the side and bottoms of the doors. Install weatherstripping on any leaking doors.

:}

http://buildipedia.com/channels/at-home/item/892-winterizing-your-home

  • Walls
    • Inspect for air leakage on the inside of the home.  A candle or incense stick can be used to help locate the air leaks.  Flame or smoke will be noticeably directed away from the location where air leaks are occurring.  If necessary, insulate or seal air leaks around doors, windows, outlets, and other penetrations where air leaks are occurring.

:}

http://www.valuhomecenters.com/winterize.asp

Winterizing Your Home Tip #4: Weatherstrip Doors and Windows

On a day when it’s windy outside, close your windows and feel for air leaks. You can use an incense stick for this too if you don’t mind the smell. Watch the smoke trail and if it becomes anything other than vertical, you have an air leak. Typically air leaks will be at the edges where the window is hinged, slides or meets another unit, such as between the two panels of a double hung window. The easiest fix here is to check for weatherstripping on the side and bottoms of the doors. Install weatherstripping on any leaking doors.

:}

Go ahead and caulk the air leaks that you find that can be handled using that material. This would be typically around windows and doors, along floors and baseboards and around some ceiling fixtures. We will talk about windows, doors and outlets tomorrow.

:}

The Difference Between Energy Efficiency And Energy Conservation – Big difference

I have said it before and I will say it again Energy Efficiency sucks because it implies that we can keep doing what we have been doing if we just use less energy. WRONG. The growth model of capitalism and the growth model of religious dominance were always doomed to failure because they were at the heart delusional. The Earth is finite and we ain’t moving to another planet anytime soon if ever. Oh wait, first I must say:

:}

Community Energy Systems is a nonprofit 501c3 organization chartered in Illinois in Sangamon County. As such we are dependent on public donations for our continued existence. We also use Adsense as a fundraiser. Please click on the ads that you see on this page, on our main page and on our Bulletin Board (Refrigerator Magnets) and you will be raising money for CES. We say a heartfelt THANK YOU to all who do.

:}

The point has also been made that what we save in the residential market will only get “used” in the industrial market anyway. What we need is a whole new society design…That will take nearly cataclysmic events to produce.

http://www.theglobeandmail.com/blogs/jeff-rubins-smaller-world/why-energy-efficiency-means-higher-consumption/article1419515/

Jeff Rubin's Smaller World

A blog about how weaning our economy off oil means some fundamental changes in the way we live, and other things

Wednesday, January 6, 2010 6:12 AM

Why energy efficiency means higher consumption

Jeff Rubin

Buddy, my furnace repairman, tells me it’s time to buy a new furnace. And I’d better act quickly if I still want to order the old mid-efficiency model. In the New Year, I have to buy a high-efficiency one, which, of course, costs twice as much.

Welcome to the brave new world of energy scarcity—it’s not only smaller, but also more costly. As energy prices continue to climb, you can expect to pay more, not less, for all the new energy-efficient cars and devices for your home.

But don’t count on actually saving any energy.

Efficiency may be the holy grail of the economist, but it’s a total head fake for the conservationist. And while one is being used to promote the other, the two concepts are as different as day and night.

The fact that the high-efficiency furnace generates more heat for a given amount of fuel burnt doesn’t necessarily mean I will end up with any fuel savings. As the cost of my heating falls, might it just allow me to set my thermostat higher? If so, my energy savings go right up the chimney.

That’s just where all the energy savings in the auto industry have gone over the last four decades — up the tailpipe, actually. Despite all the efficiency gains mandated by rising CAFE (corporate average fuel economy) standards, your average North American car consumes just as much fuel today as it did back in the early 1970s. Sure, the engine is 30 per cent more efficient, but now it’s hauling around an SUV that’s driven about a third more per year than a vehicle was back then.

And it’s no different in your home. Don’t be fooled by the fact that even today’s kettle has to meet some government-mandated energy-efficiency standard. Your house consumes a lot more energy than your parents’ did.

:}